开关/调节器/传感器

Reconditioned Auxiliary air valve regulator.


Fits:
Porsche 911 1977-82
Porsche 930 1977-82

Click 'Zoom in' for large parts diagram.
Diagram ref no 47.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911606102AX

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned Auxiliary air valve regulator

Ref: 93060610200, Bosch, 0280140204,



Fits:
Porsche 911 1983 >> K-jet
930.66/ 930.68

Click 'Zoom in' for large parts diagram.
Diagram ref no 47.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

930606102X

您正在查看的产品与这些编号存在交叉引用关系

Boost Pressure Switch Insert.

Fits:
Porsche 911 (930) Turbo 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93011036701

您正在查看的产品与这些编号存在交叉引用关系

Boost Pressure Switch.

Fits:
Porsche 911 (930) Turbo 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 13.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93060610100

您正在查看的产品与这些编号存在交叉引用关系

Intake Flapper Valve Lever. Controls the intake pre-heater valve.



Fits:
Porsche 911 1972-75

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110806101

您正在查看的产品与这些编号存在交叉引用关系

Microswitch for intake manifold. Located on the intake manifold, below the throttle linkage.



Fits:
Porsche 911 1969-73
with MFI Mechanical Fuel Injection

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161310600

您正在查看的产品与这些编号存在交叉引用关系

Microswitch for intake manifold. Located on the intake manifold, below the throttle linkage.



Fits:
Porsche 911 1969-73
with MFI Mechanical Fuel Injection

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161310600

您正在查看的产品与这些编号存在交叉引用关系

Microswitch for K-Jetronic.



Fits:
Porsche 911 T (USA; 1973)
Porsche 911 and 911 S (1974 to 1975)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161310601

您正在查看的产品与这些编号存在交叉引用关系

Microswitch for Throttle Body Flap.



Fits
Porsche 911 CARRERA 3.2L 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 17.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160601303

您正在查看的产品与这些编号存在交叉引用关系

Pressure Transmitter.

Fits:
Porsche 911 (930) Turbo 1978-89

This product supersedes Porsche's old part numbers:
- 99360610300

Click 'Zoom in' for large parts diagram.
Diagram ref no 14.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99360610301

您正在查看的产品与这些编号存在交叉引用关系

Regulator Housing.



Fits:
Porsche 911 1972-73
Porsche 911/83 1974-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110801500

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 SC 3.0L 1975-83

Having problems starting your 911 when it's cold? It could be the warm up regulator located on the upper left hand side of the engine. This simple device is responsible for controlling the amount of fuel delivered to the engine during its warm-up period. The pressure acting upon the top of the control plunger varies depending on the engine temperature and provides an effective method of enrichment. The control pressure is tapped off from the primary pressure circuit in the metering head's lower chamber through a tiny restrictive hole which gives it the ability to differentiate between the two pressures. A flexible pipe then connects the control plunger gallery to the warm-up-regulator and returns back to the metering head to a connection next to the primary pressure regulator's transfer valve. This valve is in the circuit to close the fuel from the control circuit when the engine is off, avoiding the total loss of system pressure while the engine is stationary.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911606105JX

您正在查看的产品与这些编号存在交叉引用关系