交流发电机/发电机

发电机到发电机升级。保时捷 912



适合：
保时捷 912 - 1969 年

机身直径103.5mm

这些交流发电机的设计看起来与原始发电机相同。
优点是您的车辆将保留其原始外观，同时拥有更强大、更可靠的充电系统。与原始发电机相比的其他优点包括：

• 生成大约两倍的输出
• 由于装置内置电压调节器，接线大大简化
• 更轻 - 重量约为原始设备的 60%
• 由于使用现代材料和组件而提高了可靠性

接线非常简单，您只需绕过隔板安装的调节器并连接到现有的电缆即可。它们是在英国用铝坯制造的，内部装有轻型 50 安培交流发电机 - 在大多数情况下可将原始产品的输出提高一倍。

•电压：12
• 极性：负极
•放大器：50
• 所有装置均按照BSI ISO 9002 标准生产。
• 所有设备都有自己的序列号，以便追溯。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61660311200

您正在查看的产品与这些编号存在交叉引用关系

发电机升级为交流发电机。保时捷 356 / 912

#世界和平#

适合：
保时捷 356
保时捷 912 - 1967 年

100mm直径机身
原装直径为 90 毫米的机身需要经过加工的安装支架才能安装 100 毫米的机身

这些交流发电机的设计看起来与原来的发电机相同。
优点是您的车辆将保留其原始外观，同时拥有更强大、更可靠的充电系统。与原装发电机相比，其他优点包括：

• 产生大约两倍的产量
• 由于设备内置有电压调节器，因此接线大大简化
• 重量更轻 - 约为原机重量的 60%
• 由于使用现代材料和部件而提高了可靠性

接线很简单，只需绕过隔板安装的调节器并连接到现有电缆即可。它们在英国制造，采用铝坯，内部装有轻型 50 安培交流发电机 - 在大多数情况下，输出功率是原装产品的两倍。

• 电压：12
• 极性：负极
• 安培：50
• 所有设备均按照BSI ISO 9002 标准生产。
• 所有设备均有自己的序列号，以便于追踪。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61660311200

您正在查看的产品与这些编号存在交叉引用关系

12V. 25Amp DC Generator ext.reg.



Fits:
Porsche 356B 1600 1.6L 01.1960 - 08.1963 616.1
Porsche 356B 1600 S 1.6L 01.1960 - 08.1963 616?
Porsche 356B 1600 S-90 1.6L 01.1960 - 08.1963 616.7
Porsche 912 1.6 Coupe 1.6L 09.1967 - 08.1968 616.39
Porsche 912 1.6 Coupe 1.6L 09.1965 - 08.1969 616.36

Overall length: 89 mm outer diameter
Voltage: 12V
Power: 25Amp.
Rotation: left, counter-clockwise CCW
Fixing: caliper-fixing (clamp)
Control: no
Pulley: no
Special feature: with continuous wave

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61660310201

您正在查看的产品与这些编号存在交叉引用关系

High Output 175A Alternator (regulated) to replace all air cooled Porsche 911 alternators.
This alternator fits the original fan housings.



Fits:
Porsche 911 up to 1973

For cars up to 1973 the alternator is a direct fit.

Replacing Porsche alternator: 
90160311800 / 91160310652 / 91160311800 / 91160312000

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160311800

您正在查看的产品与这些编号存在交叉引用关系

Alternator 12v 55A (Internal Regulator)



Note** This has an internal regulator the external regulator should be removed from the car when fitting

Fits:
Porsche 911 1965-74

Alternator 12V-55A.
Replace: 91160310600, 90160311400, 90160311300.



This is a NEW part not an exchange part, so no old part is required. This alternator is usable for all old "small" type alternator stand.

Fits
Porsche 911 65-77 with internal regulator.

For Installation Instructions please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

901603106DX

您正在查看的产品与这些编号存在交叉引用关系

Alternator 14V 60A.



Fits:
Porsche 911 1965-74

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160312000

您正在查看的产品与这些编号存在交叉引用关系

Alternator fan / impeller housing strap.



Fit:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1975-89
Porsche 964 Turbo 3.3L / Turbo 3.6L 1991-94
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96410625120

您正在查看的产品与这些编号存在交叉引用关系

Alternator fan / impeller housing strap.  Stainless steel 



Fit:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1975-89
Porsche 964 Turbo 3.3L / Turbo 3.6L 1991-94
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96410625120

您正在查看的产品与这些编号存在交叉引用关系

11-Blade Alternator Fan / Impeller (245mm Diameter), 3.75" Diameter Pulley



Fits:
Porsche 911/912 (1965-1969) (911 up Through 68)
Porsche 911T/E/S Carrera RS (1970-73)
Porsche 911/911S / Carrera (1974-1977)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110601003

您正在查看的产品与这些编号存在交叉引用关系

交流发电机风扇外壳



合身：
保时捷 911 1965-89

Rennline 的钢坯风扇罩完全由两块实心铝块 CNC 加工而成，与其他由铸铝或镁制成的售后 OEM 替代品相比，其外观更坚固、更时尚。

用新的风扇罩装饰您的平板 6 - 有 3 种不同颜色的阳极氧化饰面可供选择。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M57

您正在查看的产品与这些编号存在交叉引用关系

Alternator fan pulley wrench.
Reference numbers: 99957104702



Fits:
Porsche 911 F/G
Porsche 912

This hook wrench is an optimized version of the original on-board tool and fits better in the hole of the pulley thanks to the extended and curved pin. The locking key is a must for every 911 F/G model owner and allows you to separate the pulley from the fan wheel, for example to change the alternator V-belt.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99957104702

您正在查看的产品与这些编号存在交叉引用关系

Alternator V-belt pulley half – white galvanised.



Fits:
Porsche 911 F (1965 - 1968) Only up to engine no. 0909000

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90160342100

您正在查看的产品与这些编号存在交叉引用关系

Alternator Pulley Half.



Fits:
Porsche 911 1965-74
Porsche 911 1975-77 Engines 911/41/42/46/47/83
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90160342101

您正在查看的产品与这些编号存在交叉引用关系

Alternator Pulley Half.



Fits:
Porsche 911 1965-74
Porsche 911 1975-77 Engines 911/41/42/46/47/83
Porsche 914 1970-76

Pulley half specifications: 8 holes / Diameter - 96 mm

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90160342101

您正在查看的产品与这些编号存在交叉引用关系

Alternator pulley hexagon nut. M 16 X 1, white galvanized.



Fits:
Porsche 911 1965-83
Porsche 928 1978-82

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90160390502

您正在查看的产品与这些编号存在交叉引用关系

Alternator pulley hexagon nut. M 16 X 1.



Fits:
Porsche 911 1965-83
Porsche 928 1978-82

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90160390503

您正在查看的产品与这些编号存在交叉引用关系

Alternator wiring harness loom for motorola unit.



Fits:
Porsche 901 / 911 - 1964 to 1965

For Motorola alternator only

Harness from alternator to regulator with rubber terminal boot included. (Motorola)

(Only for 1964 901 and 1965 911)

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

The high flex sleeving is very resistant to solvents, free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161203710

您正在查看的产品与这些编号存在交叉引用关系

Clamp for blower housing. Porsche 911 65-72


Fits:
Porsche 911 F (1965 - 1972)

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110625102

您正在查看的产品与这些编号存在交叉引用关系

Fan cover plate for generator (420W).



Fits:
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610633700

您正在查看的产品与这些编号存在交叉引用关系

Gasket for Generator carrier bracket.



Fits:
Porsche 912 1965-69
Porsche 356 1950-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 45

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53901125

您正在查看的产品与这些编号存在交叉引用关系

Gasket for Generator carrier bracket.



Fits:
Porsche 912 1965-69
Porsche 356 1950-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 45

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53901125

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61660311200

您正在查看的产品与这些编号存在交叉引用关系

Generator carrier bracket.



Fits:
Porsche 912 1965-68
Porsche 356 1600 C/SC 1964-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 44

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG10121601

您正在查看的产品与这些编号存在交叉引用关系

Generator harness 420W.



Fits:
Porsche 912 (1965-68)

Made in Canada.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90261203700

您正在查看的产品与这些编号存在交叉引用关系

Generator pulley hub (for 53909315 / 53909316).



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

54709311

您正在查看的产品与这些编号存在交叉引用关系

Generator pulley hub (for 53909315 / 53909316).



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

54709311

您正在查看的产品与这些编号存在交叉引用关系

Generator rebuild kit 12V 30A 105 mm.



Fits:
Porsche 356
Porsche 912

Fits for Bosch generator number 0101 206 116 or 0101 206 117 or Porsche number 616 603 102 01 or all 356 6V generator. This rebuild kit is usable with 0190 350 068 Bosch voltage regulator. 

Generator rebuilt kit 12V 30A 90 mm 356/912. With this kit you can rebuild your 912 generator. This is for the 90 mm generator. This kit can also be used to transfer your 6V 356 generator in to 12V. Set includes 2 bearings, 1 set brushes, 2 field coils and 1 armature. There Are 2 types of Bosch 90 mm generator. The difference is in the field coil holder. These field coils are for the short field coil holder. You can easy shorten the field coil holder with a few millimeters to fit these short field coils. Parts are also separate available.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0101206116RK

您正在查看的产品与这些编号存在交叉引用关系

Generator rebuild kit 12V 30A 90 mm.



Fits:
Porsche 356
Porsche 912

Fits for Bosch Generator number 0101 206 116 or 0101 206 117 or Porsche number 616 603 102 01 or all 356 6V generator. This rebuild kit is usable with 0190 350 068 Bosch voltage regulator. 

Generator rebuilt kit 12V 30A 90 mm 356/912. With this kit you can rebuild your 912 generator. This is for the 90 mm generator. This kit can also be used to transfer your 6V 356 generator in to 12V. Set includes 2 bearings, 1 set brushes, 2 field coils and 1 armature. There Are 2 types of Bosch 90 mm generator. The difference is in the field coil holder. These field coils are for the short field coil holder. You can easy shorten the field coil holder with a few millimeters to fit these short field coils. Parts are also separate available.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0101206116RK

您正在查看的产品与这些编号存在交叉引用关系

Generator wire lead rubber boot, 2 required per car. Sold each.



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610938100

您正在查看的产品与这些编号存在交叉引用关系

Ground Strap Alternator and Intercooler.



Fits:
Porsche 911 - 1965 to 1973 - (alternator)

Porsche 911 turbo - 1987 to 1989  (intercooler)
Porsche 914 - 1970 to 1976

Click 'Zoom in' for large parts diagram.
Diagram ref no 18 or 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161211000

您正在查看的产品与这些编号存在交叉引用关系

High output 175 amp alternator. Porsche 911 (early fan housing)



Fits:
Porsche 911 2.0ltr - 1964 to 1969
Porsche 911 2.2ltr - 1970 to 1971
Porsche 911 2.4ltr - 1972 to 1973

• Weight: 5.2kg
• Amp: 175
• Connections: B+ / Lamp
• Construction: Full Billet
• All units are produced to BSI ISO 9002 standards.
• All units have their own serial number for traceability.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160312000

您正在查看的产品与这些编号存在交叉引用关系

Replacement Impeller blade fan centre support complete with rivets.



Fit:
Porsche 911/912 (1965-1969) (911 up Through 68)
Porsche 911T/E/S Carrera RS (1970-73)
Porsche 911/911S / Carrera (1974-1977)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9011060100X

您正在查看的产品与这些编号存在交叉引用关系

Inner Generator Pulley I Half. Porsche 356 / 912



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53909315

您正在查看的产品与这些编号存在交叉引用关系

Inner generator pulley nut (for 53909315 / 53909316).



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

54709303

您正在查看的产品与这些编号存在交叉引用关系

Inner generator pulley nut (for 53909315 / 53909316).



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

54709303

您正在查看的产品与这些编号存在交叉引用关系

Outer Generator Pulley II Half. Porsche 356 / 912



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53909316

您正在查看的产品与这些编号存在交叉引用关系

Regulator for three-phase generator 350W / 12V.



Fits:
Porsche 356 C (1963 - 1965)
Porsche 911 F (1965 - 1968)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61660320201

您正在查看的产品与这些编号存在交叉引用关系

Rennline Stainless Steel Alternator Strap.

Fits:
Porsche 911/930 All 1965-89

We have redesigned our alternator straps for a sleeker look and simpler install. On most older 911's, the cadmium-plated alternator housing strap looks worse for the wear - the plating has become dull or corroded. The factory alternator housing strap can't be replaced without removing the ignition distributor, which necessitates resetting the engine's timing. Rennline's new alternator housing strap solves both problems: the brushed stainless steel perforated strap can be left as is or painted the color of your choice, and its unique 3 piece design makes installation easy to accomplish without touching the distributor. Comes with stainless steel hardware.

Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M03

您正在查看的产品与这些编号存在交叉引用关系

Shim washer for generator belt pulley.
sold each.



Fits:
Porsche 912 Early 
Porsche 356 all models

*** On late 912 models with larger 420W generator also used for the impeller side). In total there should always be 10 used on the pulley side.

Click 'Zoom in' for large parts diagram.
Diagram ref no 42

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53909314

您正在查看的产品与这些编号存在交叉引用关系