敞篷车

Replacement convertible hood canvas.
BLACK

Headliner

Fits:
Porsche 944 1988>>
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 3.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9440541007

您正在查看的产品与这些编号存在交叉引用关系

Cabriolet Hood (B) Pillar Seal, outer uncoated version. Left or Right side



Fits:
Porsche 944 1989-91

This product supersedes Porsche's old part numbers:
- 94156151710 (LEFT) / 94156151810 (RIGHT)

Click picture for large parts diagram.
Diagram Ref: 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94156151

您正在查看的产品与这些编号存在交叉引用关系

Cabriolet Hood Fastener Bottom Part.



Fits:
Porsche 911 1987-89
Porsche 964 1989-94

Click 'Zoom in" for large parts daigram.
Diagram ref no 6.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959183617

您正在查看的产品与这些编号存在交叉引用关系

Cabriolet Hood Fastener Bottom Part.



Fits:
Porsche 911 1987-89
Porsche 964 1989-94

Click 'Zoom in" for large parts daigram.
Diagram ref no 7.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959183817

您正在查看的产品与这些编号存在交叉引用关系

Cabrio Hood Microswitch with Plate.



Fits:
Porsche 944 1989-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 993 C2 / C4 / C2S / C4S

Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161303701

您正在查看的产品与这些编号存在交叉引用关系

Cabriolet hood rear section with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 944
Porsche 968

Cabriolet hood comes with black interior lining

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

941561053

您正在查看的产品与这些编号存在交叉引用关系

敞篷车顶侧面密封。
左侧或右侧

#保时捷#

适合：
保时捷 944 1989-91

单击图片可查看大部件图。
图表参考：4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94156138

您正在查看的产品与这些编号存在交叉引用关系

Cabriolet roof headliner



Fits
Porsche 944
Porsche 968

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic.

Material:
Headliner material similar to the original material.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94156114910

您正在查看的产品与这些编号存在交叉引用关系

Complete cabriolet hood with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 944
Porsche 968

Cabriolet hood comes with black interior lining

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

941561901

您正在查看的产品与这些编号存在交叉引用关系

Convertible top frame lever screw bearing sleeve.



Fit:
Porsche 944 1989-91 Cabrio
Porsche 968 1992-95 Cabrio

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99992402800

您正在查看的产品与这些编号存在交叉引用关系

Convertible top frame lever screw. M 10 x 21.5. Micro-self-locking.


Fit:
Porsche 944 1989-91 Cabrio
Porsche 968 1992-95 Cabrio

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94150482610

您正在查看的产品与这些编号存在交叉引用关系

Main folding bow spacer plate 1mm.



Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 41.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91156142301

您正在查看的产品与这些编号存在交叉引用关系

Main folding bow spacer plate 2mm.



Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 41.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91156142300

您正在查看的产品与这些编号存在交叉引用关系

Side section outside, upper left, at rear lining.



Fits:
Porsche 944/2 Cabriolet (1989 to 1991)
Porsche 968 Cabriolet (1992 to 1995)

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94150362510

您正在查看的产品与这些编号存在交叉引用关系

Side section outside, upper right, at rear lining.



Fits:
Porsche 944/2 Cabriolet (1989 to 1991)
Porsche 968 Cabriolet (1992 to 1995)

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94150362610

您正在查看的产品与这些编号存在交叉引用关系

Tenax fasteners, cap, Chrome
Size: 20 x 15 x 11mm
Finish: Chrome Plated Brass



Fits:
Porsche 911 1978-89 CABRIO
Porsche 964 1989-94 CABRIO
Porsche 993 1995-98 CABRIO

Please note:
Will work perfectly with:
- Lower Tenax, Stud, part number 99959159802/1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959160112

您正在查看的产品与这些编号存在交叉引用关系

Tenax Fasteners, Stud, Black.
Size: 4.2mm x 10mm
Finish: Black Chrome Plated Brass/Steel



Fits:
Porsche 911 1978-89 CABRIO
Porsche 964 1989-94 CABRIO

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959159702

您正在查看的产品与这些编号存在交叉引用关系

Tenax Fasteners, Stud, Black.
Size: 4.2mm x 16mm
Finish: Black



Fits:
Porsche 911 1978-89 CABRIO
Porsche 964 1989-94 CABRIO
Porsche 993 1995-98 CABRIO

Please note:
Will work perfectly with :
- Chrome Cap, part number SMC000949 and
- Brass Cap, part number SMC001949

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959159802

您正在查看的产品与这些编号存在交叉引用关系

Tenax fasteners, stud, chrome.
Size: 4.2mm x 10mm
Finish: Chrome Plated Brass/Steel



Fits:
Porsche 911 1978-89 CABRIO
Porsche 964 1989-94 CABRIO

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99959159702

您正在查看的产品与这些编号存在交叉引用关系