SPORTS 系列制动盘
Dimensions : 410 × 62 × 34 mm
Weight: 10.9 kg
This Product Fits:
Porsche 992 2021>> GT3 iron replacement
Porsche 992 2021>> GT3 iron replacement for PCCB
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns. When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
410.057.6
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 GT3 4.0L
Brake disc rotor, Front. FORMULA Z. Porsche 992 GT3 (OE Part No 9GT615301B / 9GT615301B)
Vented, Perforated, Two-piece brake disc, Coated
Outer diameter: 408 mm
Brake Disc Thickness: 34 mm
Porsche 992 GT3 - FRONT
Steel Discs
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.
Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9GT61530
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 GT3 4.0L
制动盘转子,后部。FORMULA Z。
通风、打孔、双片式制动盘、涂层
外径:380mm
刹车盘厚度:30mm
高度:74毫米
轮辋孔数:5孔
螺栓孔圆直径:130mm
定心直径:98mm
保时捷 992 GT3 - 后部
保时捷 992 GT3 RS - 后部
保时捷 718 Cayman GT4 RS - 后部
钢片
Zimmermann Formula Z刹车盘的设计目标是将简单的安装与高机械和热负荷下的最佳制动效果结合起来。
Zimmermann 开发的复合制动盘可满足发动机调校和底盘结构优化带来的日益增长的需求。
您的优势:
• 减速效果优异,高温下摩擦环不变形
• 大幅减轻重量,从而减少非悬挂质量
• 浮动安装使制动盘在相对较重的负载下能够径向膨胀,从而防止屏蔽并提高抗热裂纹能力
• 通过优化通风通道设计防止“热点”
• 可以 1:1 交换原始光盘
• 无需注册:随光盘提供通用 ABE 认证
• 无需转换即可调整刹车
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9GT61560
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 GT3 4.0L
- Porsche 992 GT3 RS 4.0L
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
单独出售 - 每张光盘需 5 张
适合:
配备中央锁止车轮的保时捷 991 GT3 Cup
带中央锁止车轮的保时捷 992 Cup
描述
中心锁轮驱动销
这些销钉会随着时间的推移而磨损,并在更换车轮时损坏,从而导致车轮移动幅度超过预期。
与保时捷零件编号 991.341.705.8A 和 9F1401111 类似
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9F1401111
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 992 GT3 4.0L
- Porsche 992 GT3 RS 4.0L
Replacement Street Rear Brake Disc, Slotted Direct Drive V3
(Left OR Right).
380mm diameter and thickness is 30mm
The radial depth is 47mm
Brake disc only, does not include brake bell
This Product Fits:
Porsche 991 GT3 2012>>
Porsche 992 GT3
Porsche Cayman 981C GT4 2013>>
Porsche Cayman 718 GT4
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
380.30.0065
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 992 GT3 4.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Two-piece floating slotted V3 rear iron disc upgrade
(including road centre-lock wheels).
These assemblies will replace the steel version with 380mm front and rear disc. From our information, the Porsche 981GT4 and 991GT3 with PCCB are 410mm front /390mm rear. PFC are working on replacement disc for PCCB cars.
Disc size : 380 mm x 30mm
Porsche 991 GT3 2012>>
Porsche 992 GT3
Porsche Cayman 981C GT4 2013>>
Porsche Cayman 718 GT4
Not suitable as PCCB conversion 991G
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 992 GT3 4.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
适用于保时捷车型的运动制动盘