EBC BLUE NDX 赛道/赛车刹车片

EBC Blue brake pads NDX RACE
Sold as set of 4 pads for one axle.




Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Front)
Porsche 997 C2 3.6L 2004-05 (Front)
Porsche 986 Boxster S 3.2L 2000-06 (Front)
Porsche 987 Boxster S 3.2L / 3.4L 2005-08 (Front)*
Porsche 987C Cayman S 3.4L 2005-08 (Front)*
*Original shape to use with old type pin kit and sensors.


Porsche 996 C4S 3.6L 2003-05 (Rear)
Porsche 996 Turbo 2000-04 (Rear)
Porsche 996 GT2 2000-04 (Rear)
Porsche 996 GT3 2000-04 (Rear)
Porsche 997 3.8L C2S / C4S (Rear)
PORSCHE 997 3.8 C2S / C4S 2004-2005 (Cast Iron Disc Only) (Rear)

EBC Bluestuff NDX
Super-Street & Trackday Brake Pads

Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.

Product Information

When we say "Trackday" don't underestimate this fantastic material.

The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.

Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.

The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.

Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.

Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.

Performance



EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.

Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.

There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.

Bedding Performance

The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.

This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.

Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.

More information

Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.

Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.

Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.

Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.

EBC 蓝色刹车片 NDX RACE。
以适用于一个车轴的 4 个垫片的套装形式出售。




保时捷 996 3.4 C2 / C4 97-2002 (后)
保时捷 996 3.4 C2 / C4 02-2005（仅铸铁盘）（后）
保时捷 996 3.6 C2 / C4 / C4S / Targa 2001-2005（仅铸铁盘）（后）
保时捷 997 3.6 C2 / C4 / C4 Targa 2004-2008（仅铸铁盘）（后）
保时捷 986 Boxster 2.5 1997-99（仅铸铁盘）（后）
保时捷 986 Boxster 2.7 1999-04（仅铸铁盘）（后）
保时捷 986 Boxster S 3.2 2000-04（仅铸铁盘）（后）
保时捷 987.1 Boxster S 3.2 / 3.4 2004-08（仅铸铁盘）（后）
保时捷 987.2 Boxster S 3.4 2008-12（仅铸铁盘）（后）
保时捷 987C.1 Cayman 3.4 2005-09（仅铸铁盘）（后）
保时捷 987C.2 Cayman 3.4 2009-12（仅铸铁盘）（后）

EBC Bluesuff NDX
超级街道和赛道日刹车片

Bluestuff NDX 是一种高摩擦力运动和赛车材料，目前几乎所有欧盟配件均已获得 R90 认证。对于不适用 R90 的美国和亚洲市场，这种复合材料完全安全可靠，是公路或赛道上高速行驶的高性能车辆的完美选择。

产品信息

当我们说“赛道日”时，请不要低估这个奇妙的材料。

我们之所以让用户关注 Trackday（在美国也称为研磨）这个词，是因为这种材料具有快速磨合的出色能力。周末的驾驶者不想把时间花在磨合刹车片上。

然而，当用于更严肃的赛道车手时，这种材料令人愉悦，转子温度高达 550C /1030 F，Bluestuff 是最佳选择。欧洲许多 spec 系列杯赛车团体都使用过这种材料。

NDX 垫材料使用获得专利的 NUCAP NRS 钩系统粘合到钢背板上，该系统将剪切和粘合强度提高了五倍，并防止垫与板分离。然后对垫进行烘烤和研磨，并采用大量 V 形凹槽来捕捉轨道使用中产生的大量碎屑。

目标用途是用于性能和赛车方面的所有类型的快速且较重的汽车，其使用寿命比我们之前的 Yellowstuff 级刹车片更长。
研发经理 Steve Payne 检查了第一批采用革命性工艺生产的 Bluestuff NDX 材料，该材料用于生产备受赞誉的 EBC Bluestuff NDX 赛车垫。该工艺涉及 5 个步骤，以前从未在摩擦材料中使用过，并使 EBC Brakes 牢牢占据制动摩擦供应商的领先地位。

Bluestuff 提供 NDX 高摩擦版本，摩擦系数为 0.52 Mu，以及适用于轻型汽车许多后部应用的较低摩擦系数 B 版本，摩擦系数较低，为 0.42 Mu。

表现



EBC Bluestuff 经过热烧焦处理，有助于延长使用寿命，但您仍需小心，尤其是在高速公路上以及在部分磨损的转子上使用时。在 200 英里内轻轻使用制动器，在安全的道路环境中逐渐增加对制动器的需求，直到您完全有信心并且可以评估其在所有交通条件下的制动距离。

请记住，这取决于你和你的磨合过程。如果你确实感觉到刹车失效了几次，甚至闻到了刹车的味道，这完全正常，一旦实现并让刹车冷却下来，它们就会得到很大的改善。

表面烧灼垫片的方法有很多种，EBC 选择了红外线灯隧道来为其垫片系列进行表面处理。该炉现在正在烧灼所有用于转售的垫片，包括 Bluestuff NDX 系列。

床上用品性能

曲线显示，即使在 2-3 次停车后，摩擦力在磨合过程中也会快速增加，但在现实世界的轨道使用中，转子可能并不完美，卡钳也没有每周进行维护（例如我们的实验室测功机），使用 Blue 的磨合过程可能会在 4-5 圈后在盘片中心出现 20-25 毫米的接触带，并且在某些标准街道卡钳上会出现一些振动。

这只是刹车片在告诉您“在这些扭矩下，我无法握住刹车盘，直到我完全磨合”。如果发生振动，您应该继续驾驶，同时尽早刹车以确保安全，直到接触带扩大到几乎整个刹车盘/转子扫掠，此时振动将停止。在街道上使用时，扭矩通常不足以在磨合期间产生振动，但安全行驶 200 英里，轻柔使用刹车来磨合您的新刹车，并在安全安静的道路环境中测试它们的性能，直到您完全确信它们已经磨合。过早猛踩刹车不仅会缩短刹车片的使用寿命，还可能导致刹车损坏和事故。刹车逐渐磨合。

预磨合是在制造完成后将刹车片放在一个类似于烤面包机的装置下烘烤几秒钟，从而烧掉刹车片表面的大量挥发性有机物；这会使刹车片表面和刹车片表面周围的油漆烧焦，但结果是磨合时间大大减少，所有驾驶员都会感激这一点。

更多信息

转子状况。这很重要，不平整或带肋和凹槽的转子在街道或赛道上使用时会加倍，这是一种更坚硬、更耐用的垫片，转子应处于几乎完全平整的状态。如果您需要对转子进行打磨，我们仅推荐使用 Pro Cut 非常值得称赞的 ON CAR 制动车床。

使用寿命。务必每 30 圈检查一次刹车片，当摩擦材料磨损至八分之一英寸或 3 毫米时应丢弃，以免磨损。在街道上使用时，刹车片使用寿命相当长 - 即使在高速行驶的情况下，预计使用寿命可达 20,000 英里甚至更长。

管道和卡钳阻力。当使用街车制动系统进行比赛时，仅仅安装赛车配方刹车片并不能让您的汽车变成赛道猛兽。通常需要添加一些冷却管道，以使制动系统和刹车片有机会在比赛中生存下来。

使用 Bluestuff NDX 作为街道专用刹车片。在欧洲，ECE R90 制动安全法规要求刹车片在道路上使用时必须获得 R90 认证，而 Bluestuff 并非适用于所有汽车。要了解 Bluestuff 是否适用于您的汽车的 R90 认证，请联系我们。

EBC Blue brake pads NDX RACE.
Sold as set of 4 pads for one axle.




Porsche 996 Turbo 2001-05 (Front)
Porsche 996 GT3 2001-03 (Front)

Porsche 996 C4S 2001-05 (Front)

Porsche 997.1 C2S / C4S 3.8L 2004-08 (Front)
Porsche 997.2 C4S 3.8L 2008>> (Front)
Porsche 997.2 C2S 3.8L 2008>> (Front)

EBC Bluestuff NDX
Super-Street & Trackday Brake Pads

Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.

Product Information

When we say "Trackday" don't underestimate this fantastic material.

The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.

Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.

The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.

Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.

Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.

Performance



EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.

Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.

There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.

Bedding Performance

The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.

This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.

Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.

More information

Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.

Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.

Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.

Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.