Performance Plenum

Porsche's launch of the GT3 line marked the return of the purpose built street/track car designed to provide the ultimate Porsche driving experience. The hardcore track focus of the GT3 is reminiscent of the legendary RS line that helped make Porsche famous with driving enthusiasts around the world.



The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.

As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.

The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.

The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).

The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.

Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.

996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body

Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96382

您正在查看的产品与这些编号存在交叉引用关系

Throttle Body 82mm for Porsche



In fuel injected engines, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver accelerator pedal input in the main. The throttle body is usually located between the air filter box and the intake manifold, and it is usually attached to, or near, the mass airflow sensor.

The largest piece inside the throttle body is the throttle plate, which is a butterfly valve that regulates the airflow. Have a larger diameter throttle body produces more air flow with equals more power. The upgrades should be used in conjunction with the competition plenums.

This is a 82mm Throttle body.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99760511601

您正在查看的产品与这些编号存在交叉引用关系

保时捷 82 毫米节气门体



适合：
保时捷 918 Spyder 2015（每台发动机需要 2 个）
保时捷 957 Cayenne GTS 4.8L（发动机 48.01+）
保时捷 958 Cayenne S / GTS 4.8L（发动机代码 48.52）
保时捷 970 Panamera S/ GTS 4.8L（发动机代码 48.20 / 48.40 / CXPA / CXRA / CXR）
保时捷 991.1 Carrera C2 / C2S / C4 / C4S
保时捷 997.2 Carrera C2 / C2S / C4 / C4S 3.6L 和 3.8L 发动机
保时捷 997 GT3 3.8L 2007 >>（发动机 97.76）
保时捷 997 GT3 3.8L 和 4.0L 2009 >>（发动机 97.74 / 97.77）
保时捷 997 GT3 3.8L 2007 >>（发动机 97.76）
保时捷 991 GT3 / R 3.8L 和 4.0L（发动机 A175 / DGG / DGA / DGGB）
不适用于 GT3 RS

也适用于许多其他配备超大 82 毫米 IPD 集气室的保时捷。

在燃油喷射发动机中，节气门体是进气系统的一部分，它响应驾驶员油门踏板输入，控制流入发动机的空气量。节气门体通常位于空气滤清器盒和进气歧管之间，通常连接到空气流量传感器或靠近空气流量传感器。

节气门体内最大的部件是节气门板，它是一种调节气流的蝶阀。节气门体直径越大，产生的气流就越多，功率也就越大。升级应与竞赛增压室配合使用。


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99760511601

您正在查看的产品与这些编号存在交叉引用关系