催化剂/旁路

Fabspeed Exhaust Cat bypass X-Pipe.



Dramatically improve mid/high end power by replacing the catalytic converters with a free-flowing x-pipe while adding aggressive sports car sound and throttle response; recommended for track and off-road use only.
Dramatically improve mid/high end power by replacing the catalytic converters with a free-flowing x-pipe while adding aggressive sports car sound and throttle response; recommended for track and off-road use only.

NOTE: The Catbypass X-Pipe provides dramatic power increases in the mid to high end of the RPM range. Street drivers may notice a small torque loss at low RPM's, which is why we recommend the Sportcat X-Pipe for street applications. Please also bear in mind that this system does not include catalytic converters, so the Check Engine will most likely be triggered. This is not an indication of any actual issue with the engine, and does not prevent normal vehicle operation. Optional O2 Spacers are also available to help keep the CEL from being triggered.

FEATURES:
• Fits all 997 Carrera vehicles from 2005-2008
• Adds 12 horsepower and 12 ft-lbs of torque for improved throttle response
• Recomended for track and off-road use only
• Designed for maximum power and throttle response
• Adds an aggressive exhaust tone
• Saves 10lbs from the rear of the vehicle
• Used by many Rolex Grand Am race teams as well as PCA/POC and HPDE drivers
• Simple DIY bolt-on installation and removal for vehicles that are used both on and off the track
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
• Optional 02 Spacers available to minimize C.E.L occurrences

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR997CBX

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Catalytic Converter Bypass Pipes



DesignTek® Evolution exhausts are built for the "tuners market" high performance modified vehicles. With over 50 years of experience the products are built to the highest technical level by the manufacturing team behind the DesignTek® Evolution range.

This product may trip the engine check light, you will need to either re-map the vehicle so that it is reading the lambda sensors correctly, or fit some extra lambda sensor extensions our part number 00060612300, the product has holes for the lambda sensors. The cat bypass will increase the power delivery also give the car a deeper sporty sound.

Details:
- More power and sportscar sound.
- More power upto +10hp.
- Saves 30lbs 15 KG from rear of your 997.

*A re-map to the ECU may require when fitting these cats.

Fits
Porsche 997 Carrera 3.6L
Porsche 997 Carrera 3.8L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606209971

您正在查看的产品与这些编号存在交叉引用关系

A Voucher for £100 available when you buy this product. For more information CLICK HERE

Exhaust catalytic converter bypass X-Pipes with cat cheats.
Please note this is a catalytic converter look exhaust that is in fact bypass with built in small chamber that has got catalyst inside it. The emissions will be picked up from the chamber and readings would be as from regular catalyst.

Fits:

Porsche 997 Carrera 2 3.6L 2005>>

Porsche 997 Carrera 2S 3.8L 2005>>

Porsche 997 Carrera 4 3.6L 2005>>

Porsche 997 Carrera 4S 3.8L 2005>>

DesignTek sports racing catalytic converters give a HORSEPOWER and TORQUE gain to all 997 cars. High Quality T304 SS C.N.C. mandrel bent tubing for maximum exhaust flow.

DesignTek sports racing catalytic converters for less restriction and more power and more sports car sound. Simple bolt-on direct replacement sports cats for the factory OEM Porsche catalytic converters.


Fits:
Porsche 997 Carrera 3.6L / 3.8L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606109976

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Catalytic Converter Pipes 200 cell tricat, Stainless Steel.



Fits:
Porsche 997 3.6L C2 / C4 2005-2008
Porsche 997 3.8L C2S / C4S 2005-2008

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

997PO97270S

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Sports 200 Cell Catalytic Converter Pipes

DesignTek Sport 200 Cell Catalytic Converters for Porsche 997 Models. Gives a power gain of +12 to 15BHP. Made from High grade stainless steel.

Fits:
Porsche 997 Carrera 3.6L
Porsche 997 Carrera S 3.8L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606109971

您正在查看的产品与这些编号存在交叉引用关系

Exhaust catalytic converters 200 Cell. 2.5" 63mm



Fits:
Porsche 997.1 Carrera 3.6 / 3.8 2005-08

These are a unique design optimised for sound and power with a larger bore 2.5" allowing greater gas flows.
These 63.5MM larger bore, powerful cats boast a sportier sound than OE and taper down to meet the original 54mm piping, making them an easy fit replacement for OE. The difference in performance is really felt.

The part comes with all joiners and clamps so fitment is a non-issue. The cats used are high quality, German-manufactured 200 Cell 40G loaded cats and the X-Pipe fabrication element is professionally mandrel bent for maximal gains and optimal flow.

Please note: Sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606109977

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Headers Cat Bybass



Fits:
Porsche 997 GT3 / GT3RS 2007>>

High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309706

您正在查看的产品与这些编号存在交叉引用关系

排气套管催化转换器至消音器。
将套管从猫连接到后消音器。价格为每个套管。



适合：
保时捷 996 1998-05（非 Turbo 和 GT2）

保时捷 997 2005>>（不是 Turbo 和 GT2）

保时捷 991 Carrera C2 3.4L（350 马力）
保时捷 991 Carrera C2S 3.8L（400 马力）
保时捷 991 Carrera C4 3.4L（350 马力）
保时捷 991 Carrera C4S 3.8L（400 马力）
适合带或不带运动排气装置的汽车

单击“放大”可查看大部件图。
图表参考编号 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711152000

您正在查看的产品与这些编号存在交叉引用关系

排气套筒催化转化器至消音器。
价格为每个袖子的价格。

#保时捷#

从猫到后消音器的原装保时捷连接套。

适合：
保时捷 997 2005>>（不包括 Turbo 和 GT2）
适用于带或不带运动排气装置的汽车

保时捷 991 Carrera C2 3.4L (350Bhp)
保时捷 991 Carrera C2S 3.8L (400Bhp)
保时捷 991 Carrera C4 3.4L (350Bhp)
保时捷 991 Carrera C4S 3.8L (400Bhp)

单击“放大”查看大零件图。
图参考号 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711152000

您正在查看的产品与这些编号存在交叉引用关系

钛合金（5 级）排气套催化转化器至消音器。
将套管从猫连接到后消音器。价格为每个套管。

#罗勒#

适合：
保时捷 996 1998-05（非 Turbo 和 GT2）
保时捷 997 2005>>（不是 Turbo 和 GT2）
保时捷 991 Carrera C2 3.4L（350 马力）
保时捷 991 Carrera C2S 3.8L（400 马力）
保时捷 991 Carrera C4 3.4L（350 马力）
保时捷 991 Carrera C4S 3.8L（400 马力）

适合带或不带运动排气装置的汽车
5级钛合金可耐300°C以下的盐水和多种腐蚀介质

单击“放大”可查看大部件图。
图表参考编号 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711152000

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Exhaust sport cat x-pipe



Increase horsepower, torque, and sporty exhaust sound by replacing the factory catalytic converters with high-flowing 200-cell HJS Sport Cats

FEATURES:
• Fits all Porsche 997 Carrera vehicles (2005-2008)
• Improves horsepower and torque by 18 whp and 22 ft-lbs
• Saves 4 lbs from the rear of the vehicle
• X-pipe design includes integrated 200-cell HJS Sport Catalytic Converters for maximum flow and efficiency
• Constructed from T304L stainless steel tubing, mandrel-bent for accuracy and flow
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

NOTE:Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR997SCX

您正在查看的产品与这些编号存在交叉引用关系

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

100390100392

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Sport Center Section for 997GT3, 997GT3 RS and GT3 Cup cars - Stainless Steel Polished with Matt Black pipes



This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained

The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.

Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.

Fits:
Porsche 997 GT3 / GT3RS 2007>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606609717

您正在查看的产品与这些编号存在交叉引用关系