Engine Modifications & Upgrades

令人难以置信的 997 保时捷 Turbo 是德国有史以来最具革命性和性能最强的保时捷 Turbo。借助全新的 997 Turbo IPD 进气歧管，本已爆发式的动力将进一步增强。



获得专利的 IPD 增压室设计在所有增压应用中都表现出色，997 Turbo 也不例外。IPD 增压室提供的功率和扭矩增加令人印象深刻，并且从启动到红线一直高于所有工厂功率曲线。最大功率增加发生在最需要和最关键的中档。

最大马力增益范围为 30 至 35，具体取决于车辆状况和预先存在的改装。997 Turbo 增压室提供平稳而线性的动力，增压响应速度明显更快，从而产生更长、更理想的功率带。Turbo 增压室为街道和赛车应用提供可靠的性能，增强了原本就令人激动的保时捷 Turbo 驾驶体验。

与 996 Turbo 不同，997 Turbo 需要一个“适应”期，可以通过在测功机上进行一系列强力拉动或 10 到 50 英里的艰苦驾驶来完全实现，当然 IPD 建议只在闭路赛道上进行。

997 Turbo 具有极其敏感的 ECU/DME，这使其易受外部环境校正的影响，因此，在对任何 997 Turbo 进行测功机测试时，必须提供适当、充分和一致的冷却，以便在每次测试之前和之后获得准确、可靠的测功机数据。

强烈建议由合格且经过培训的保时捷技术人员安装所有涡轮增压室。

涡轮增压客户如果希望提高发动机功率，又不想将赛车极限推到红线，那么 74mm IPD 涡轮增压室将是最佳选择。

此版本的 997 Turbo 增压室采用工厂的 74 毫米节气门体，并为带有排气和软件的原装和略微改装的 Turbos 带来令人瞩目的性能提升。

74mm IPD Turbo Plenum 还设计用于与流量更大的 IPD“Y”管配合使用。

适合：
保时捷 997 Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97274.2

您正在查看的产品与这些编号存在交叉引用关系

革命性的 997 Turbo IPD“Y”形管道专为要求更高的 Turbo 性能客户打造。这不是工厂 Y 形管道的铸造复制品，而是从头开始的完全重新设计，旨在为原厂和经过高度改装的 Turbo 提供更大的空气流量。



工厂 Y 型管在增加大量功率增益时会变得受限。IPD“Y”型管具有更大的入口和优化的分流面积，可实现更大的功率增益。这种更卓越、更高效的设计比工厂 Y 型管多出 126 cfm，可提供提高任何 Turbo 性能标准所需的额外功率。

越大并不一定越好，而 IPD“Y”形管道的设计旨在提供最佳流量，而不会太大而导致增压响应损失。这些“Y”形管道还可以特别订购定制粉末涂层颜色和陶瓷涂层或抛光，以提高涡轮增压发动机的美感。

IPD 997 Turbo Y 管设计为工厂 OEM Y 管的直接替代品。安装 IPD Y 管无需进行任何修改或制造。这是一种简单直接的 R & R（拆卸和重新安装）螺栓升级。

997.2 Turbo Hi-Flow Y 管：HP 增益 15-20。直接螺栓更换/无需修改

适合：
保时捷 997 Turbo MKII

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97501

您正在查看的产品与这些编号存在交叉引用关系

保时捷的全新 DFI（直接燃油喷射）进气系统是经过完全重新设计的进气系统，通过直接优化燃烧室内的空气燃油混合物来提高性能、燃油消耗和排放。



DFI 保时捷发动机套件是一款经过精细调校的性能机器，事实证明很难找到额外的动力。保时捷新 DFI 进气系统的独特设计带来了非常具有挑战性的调校障碍，但 IPD 再次开发出一种设计，其性能优于工厂进气系统，同时又不影响可靠性和驾驶性能。

这种创新和革命性的 IPD DFI 进气集气室采用获得专利的“Y”形设计以及扩大的集气室面积，可以提高进气速度和速率，从而提高性能而不会造成任何功率损失。

全新专门设计的 IPD 3.6L DFI 进气集气室是一种直接螺栓升级，可取代工厂空气分配器，并利用所有预先存在的工厂硬件，包括 OE 工厂节气门体。

改进的 IPD 进气设计提高了空气速度和空气速率，从而为保时捷驾驶爱好者带来令人印象深刻的动力和扭矩增益。

DFI IPD 增压室的卓越设计为车轮提供了额外的 14 马力。与之前自然吸气 IPD 增压室在中档提供更强增益不同，新的 IPD DFI 增压室提供与工厂相似的功率曲线，但从中档到红线的功率要强得多，而低档没有任何功率损失。

新款 IPD 3.6L DFI Plenum 的安装相对简单，可以由机械倾向的 DIY 客户安装，但 IPD 强烈建议由经过培训且合格的保时捷技术人员进行安装。

适合：
保时捷 997 GEN2 3.6L

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97482-3.6

您正在查看的产品与这些编号存在交叉引用关系

保时捷的全新 DFI（直接燃油喷射）进气系统是经过完全重新设计的进气系统，通过直接优化燃烧室内的空气燃油混合物来提高性能、燃油消耗和排放。



DFI 保时捷发动机套件是一款经过精细调校的性能机器，事实证明很难找到额外的动力。保时捷新 DFI 进气系统的独特设计带来了非常具有挑战性的调校障碍，但 IPD 再次开发出一种设计，其性能优于工厂进气系统，同时又不影响可靠性和驾驶性能。

这种创新和革命性的 IPD DFI 进气集气室采用获得专利的“Y”形设计以及扩大的集气室面积，可以提高进气速度和速率，从而提高性能而不会造成任何功率损失。

全新专门设计的 IPD 3.8L DFI 进气集气室是一种直接螺栓升级，可取代工厂进气分配器，并利用所有预先存在的工厂硬件和节气门体。

改进的 IPD 进气设计可实现更平稳、更少湍流和更高效的空气流动，从而为保时捷驾驶爱好者带来令人印象深刻的动力和扭矩增益。

DFI IPD 增压室的卓越设计为车轮提供了额外的 15 马力。与之前自然吸气 IPD 增压室在中档提供更强增益不同，新的 IPD DFI 增压室提供与工厂相似的功率曲线，但从中档到红线的功率要强得多，而低档时功率没有任何损失。

新款 IPD 3.8L DFI Plenum 的安装相对简单，可以由机械倾向的 DIY 客户安装，但 IPD 强烈建议由经过培训且合格的保时捷技术人员进行安装。

适合：
保时捷 997 GEN2 3.8LS

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97482-3.8

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed's Carbon Fiber Competition Intake System installed on a Porsche 997.2 Carrera.



Improves cold air induction into the engine and improves power and sound through the rev range; constructed with genuine carbon fiber for strength and durability.

FEATURES:
• Fits all Porsche 997.2 Carrera vehicles 2009-2011
• Improves power by 16 whp and 14 ft-lbs of torque at 5500rpm
• Includes dual dry-style air filters which do no require oiling; simply wash with warm water and re-use
• Intake constructed from genuine carbon fiber
• Direct bolt-on replacement for the factory air box
• Fabspeed Lifetime Limited Warranty


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9972COMPAI

您正在查看的产品与这些编号存在交叉引用关系

Performance engine mounts (PAIR). Included two M12 x 1.75 Nuts



Separate inserts available for varying densities
Shore ratings 65A Street (available separately)
Shore ratings 75A Fast Road (included in engine mounts)
Shore ratings 85A Track (available separately)

Fits:
Porsche 964 C2 / C4 / RS / Turbo
Porsche 993 C2 / C4 / RS / Turbo
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Please note: the threads needs to be treated with loctite before installation (not sold with the product).

Replacing your factory engine mounts with these performance semi-solid mounts will dramatically decrease engine movement which then will result in better acceleration and handling of your Porsche.

CNC machined mounts with PU bushes are absolute must have for any car on track or on the street. Very easy to replace by experienced DIYers.

For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309625

您正在查看的产品与这些编号存在交叉引用关系

Tuneable Semi-Solid Engine Mount.
SET OF 2 Includes three pairs of inserts in varying densities

 

Fits:
Porsche 964/993/996/997

The Rennline Tune-able Engine Mount for the 964, 993, 996, and 997 offers the ultimate in adjust ability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive. Our mounts are CNC machined from billet aluminium and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilise the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M18

您正在查看的产品与这些编号存在交叉引用关系

RSS Performance engine mounts (PAIR).



Fits:

Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

With factory hydraulic engine mounts, the drive train will move independent of the chassis during acceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.

RSS Tarmac Series Performance Engine Mounts minimise these effects by utilising specialised polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback. This upgrade will not adversely effect ride quality or cause knock sensor issues commonly associated with solid engine mounts.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

624

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 65A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309665

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 85A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309685

您正在查看的产品与这些编号存在交叉引用关系

High flowing turbo inlet hose kit



To Fits:
Porsche 911 997.2 Turbo 2010 to 2015 with 6-Speed / PDK gearbox.

Significant advantages with Do88's high flowing turbo inlet pipes:

• Much larger overall inner diameter for improved air flow, do88's is 26% higher!
•The hose has 2.5 inch (63mm) internal diameter at the smallest location.
•Smooth flow transitions and very smooth internal surfaces for best possible air flow.
•Excellent thermal properties, the hoses will not absorb heat from the engine.
•The hoses are reinforced with stainless steel wire to eliminate the risk of collapse on high engine output!
•See enlarged images for more information.

About the Inlet Pipes:

Do88: It was a real challenge developing new turbo intake hoses for the 997.2 Turbo. The lack of space makes it really difficult to make a set of hoses that outflow the stock OEM plastic pipes. We achieved this and succeeded in maximising the performance but we had to make the small compromise of letting the hoses have no clearance; so they will push or rub in some non-sensitive areas. The hoses are reinforced with stainless steel wire to ensure overall durability and lasting performance.

Our self-developed intake hoses increase air flow; 26% higher than the OEM hoses. We can ensure you the sensation while driving is very different. The improvement in throttle response is immense, making the car feel so much more refined and alert. This upgrade makes it become what it should have been from the start. This is an improvement no test figures can explain, it has to be perceived behind the wheel of a 997 turbo!

Included in the kit:

• 2 x Wire reinforced silicone hoses
• 2 x CNC machined VTG adaptors
• All hardware for installtion!

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

Extreme high flow performance Y-Pipe.



To Fit:
Porsche 997.2 Turbo models 2010 to 2012

At the beginning of the development process of this product we spent a lot of time thinking what would be the preferred way to build a Y-pipe; here is the result of our conclusions and development process!

Significant advantages with Do88's Y-pipe compared to the OEM pipe:

• Much larger inner diameter for improved air flow, do88 62% higher!
• 70mm mandrel bent aluminium pipes.
• Smooth flow cast collector part.
• Smooth internal surface for best air flow.
• Comes with high quality silicone hoses and accessories for installation.
• See enlarged images for more information!

Our pipe has both a very good flow rate and a low weight which is achieved by combining mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then welded CNC-machined connections for bov and breather hoses.This construction adds a lot of performance but only small amount of extra weight. Do88 Performance Y-pipe weight 1,52 kg (3,35 lb) OEM plastic pipe weight 1,38 kg (3,04 lb) and a competitors cast performance pipe weight 2,76kg (6,08 lb)!

The pipes are then finished in a high quality powder coat that makes them look as good as they perform! You can choose between the more discrete semi gloss black and a fresh silver metallic finish.

The kit also includes 2 high quality custom designed silicone hoses which are available in two different versions. Which version you need depends on if you will install the Y-pipe together with the OEM intercoolers or the do88 performance intercoolers.

When it comes to air flow performance our Y-pipe totally outperforms the OEM Y-pipe by 62% increased flow at the same pressure drop! On our final tests of this Y-pipe together with our intercoolers on a Stage 1 tuned 997.2 Turbo PDK we measured a great performance increase. In all tests the car was driven in Sport Plus, automatic gear change and AC off. From our five in a row full throttle accelerations between 40-270 km/h (25-168 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds!

Included parts in this kit:

• Full aluminium performance Y-pipe
• Silicone hoses
• Hose clamps
• Hose adaptors if the Y-pipe will be installed together with OEM intercoolers

Rennline intake ducts carbon fibre. 

Fits:
Porsche 997 turbo Gen 1 - 2007 to 2009
Porsche 997 turbo Gen 2 - 2010 to 2013

Product Description

Rennline’s carbon fibre 997 Turbo intake ducts are a great way to give your 997's engine bay a modern facelift and these work in conjunction with our 997 Turbo Intake, to increase airflow and performance. 

Made from high quality carbon fibre using the latest technology, our intake ducts are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. Installs in minutes using new factory hardware.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M66

您正在查看的产品与这些编号存在交叉引用关系

限流板套件。保时捷 997 Cup / 保时捷 991 Cup



适合：
保时捷 997 GT3 杯
保时捷 991 GT3 杯

这些限制器安装在进气节气门体的前部和进气管的下方。

使用我们的限流板套件进行控制
使用我们的限流板套件充分利用您车辆的动力。它专为后期的 997 和 991 空气过滤系统而设计。这些精密加工的限流器安装在进气节气门体的前部和进气管下方。

您购买的产品包含哪些内容
您的购买包括一组 10 个不同的限流板。此阵列提供各种限制选项。因此，您可以根据您的确切需求微调车辆的马力。这可确保在任何情况下都能获得最佳性能。

这包括一组 10 块板，可安装在进气管下方的节气门壳体前面。易于安装，也易于根据需要拆卸。

非常适合 NASA GTS 准备
您正在为 NASA GTS 做准备吗？我们的限流板框架是您的完美工具。它可以精确校准马力。因此，您每次都可以达到所需的性能水平。我们在 996 杯车上测试了这个板框架，结果非常好。马力平稳降低，空燃比不受影响。

为什么选择我们的限流板套件
我们的限流板提供精确的马力控制。对于赛车爱好者和那些想要定制车辆性能的人来说，这是必备品。使用这款可靠、高效的工具体验定制调校的不同之处。投资我们的限流板，立即体验定制性能的快感。

适合所有 997 杯和所有 991 杯