排气尾管

Akrapovic Titanium Exhaust Tail pipe Set.



Fits:
Porsche 911 GT3 (991) 2014 - 2017
Porsche 911 GT3/RS (997 FL) 3.8 2009 - 2012
Porsche 911 GT3/RS (997 FL) 4.0 2011 - 2012
Porsche 911 GT3/RS (997) 3.6 2006 - 2009

Finish the system with a pair of eye-catching double round tailpipes, made of high - grade titanium.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TP-PO997GT3H

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Bolt on replacement stainless steel twin tail pipe.



DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished stainless steel polished for a show car shine. Each pipe is 85mm double angle mitre cut.

Fits:
Porsche 997 GT3
Porsche 997 GT3RS

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606409704

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Bolt on replacement TITANUIM twin tail pipe.



DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished TITANUIM polished for a show car shine. Each pipe is 85mm double angle mitre cut.

The Advantages:
Titanium has the combined properties of being light and strong, It is also corrosive resistant and can withstand high temperatures.

Fits:
Porsche 997 GT3
Porsche 997 GT3RS

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606409701

您正在查看的产品与这些编号存在交叉引用关系

Exhaust tail pipe in polished black steel.
Porsche 997 GT3 and GT3 RS



Fits
997 Gen 1
Porsche 911 GT3
Porsche 911 GT3 RS
Porsche 911 GT3 4.0Ltr
997 Gen 2
Porsche 911 GT3
Porsche 911 GT3 RS

This product can be mounted all GT3, GT3 RS, GT3 RS 4.0 versions, both on MK1 and on MK2 car models

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TSPOGT3.023.AC

您正在查看的产品与这些编号存在交叉引用关系

Exhaust tail pipe in polished steel. Porsche 997 GT3 and GT3 RS



Fits
997 Gen 1
Porsche 911 GT3
Porsche 911 GT3 RS
Porsche 911 GT3 4.0Ltr
997 Gen 2
Porsche 911 GT3
Porsche 911 GT3 RS

This product can be mounted all GT3, GT3 RS, GT3 RS 4.0 versions, both on MK1 and on MK2 car models

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TSPOGT3.023.A

您正在查看的产品与这些编号存在交叉引用关系

Titanium exhaust tailpipe tip. Porsche 997/ 991 GT3 and GT3 RS
Available in black or clear

Outer diameter is 90mm

Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB


Extremely light weight and strong, this titanium GT3 style exhaust tip is perfect for your
modern GT3/RS or custom air-cooled project.
45% lighter than stainless steel, they weigh 825 grams saving significant weight at the rear

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-EX-01

您正在查看的产品与这些编号存在交叉引用关系

Titanium exhaust tip titanium fastenings



Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.

The kit includes 3x titanium flange nuts and 3 correct washers (two off-centered, and a standard washer).

Lighter than steel, they will not corrode and look good indefinitely.

The black nuts and washers are black titanium nitride coated, the silver, raw titanium.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-EX-02

您正在查看的产品与这些编号存在交叉引用关系

Titanium exhaust tip titanium nut and bolt fastening kit.

Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.

The kit includes 3x titanium flange nuts, 3 correct washers (two off-centered, and a standard washer) and 3 x bolts to install the exhaust tips when using a center muffler bypass exhaust. Bolts are raw titanium.

Lighter than steel, they will not corrode and look good indefinitely.

The black nuts and washers are black titanium nitride coated, the silver, raw titanium.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-EX-03

您正在查看的产品与这些编号存在交叉引用关系