发动机改装及升级

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

旋装式机油滤清器

适合：

保时捷 986/987 以及 996/997 车型，可替换保时捷零件号 996 107 020 53（54、55）。适用于发动机型号为 M96 或 M97 的 MY97-08 车辆。
不适合 GT2、GT3 或 Turbo 型号或任何风冷型号。仅针对配备 M96/M97 发动机的 MY97-08 车辆设计。

保时捷 987.2 MY09+ Boxster 和 Cayman 车型

保时捷 955 Cayenne S V8 和 955 Cayenne Turbo MY03-06

Oil Filter Spin-on Type (Short type)

Fits:

Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.

Porsche 987.2 MY09+ Boxster and Cayman models

Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

OC1051

您正在查看的产品与这些编号存在交叉引用关系

油底壳挡板套件 X51 动力套件风格。



适合
保时捷 986 Boxster
保时捷 987 Gen 1 Boxster / Cayman - >>2008 年

保时捷 996 Carrera 2 / Carrera 4 / Carrera 4S
保时捷 997 Gen 1 Carrera 2 / Carrera S / Carrera 4 / Carrera 4S - >>2008 年

EBS Racing X51 款 M96/M97 油底壳挡板套件与标准油底壳（无深油底壳延伸）配合使用，是一款重型全金属结构油底壳挡板，适用于 2008 年款之前的所有 Boxster、996 和 997 发动机，涡轮增压和 GT3 车型除外。

这款 CAD 设计和精密制造的油系统增强组件可在运动驾驶过程中将更多的油保持在应在的位置；在皮卡周围。为了从第一天起就保持稳定的性能，我们使用了不会像工厂那样变质或弯曲的金属门。EBS油挡板组件可轻松安装在任何工厂油底壳上，并附带硬件和安装说明，便于安装。

套件包括
EBS Racing M96/97 油挡板组件
LC5900密封胶
6x10mm 锯齿法兰螺栓 - x3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-00.6

您正在查看的产品与这些编号存在交叉引用关系

用于安装 IMS 轴承的 IMS 钻孔工具



这种钻孔工具也可以从我们这里租用
用于安装我们的 62 毫米 IMS 套件代码：987997IMS62MM。如需租赁，请参阅其他列表。

当您购买此产品时，我们将为您提供一套全新的、未用于任何工作的工具。
如果我们发现该部件已使用过，我们将不接受退货。


有关 IMS 镗孔工具说明，请单击此处

SET OF 2 , Fast Road Performance gearbox / transmission Mounts. Semi-Solid Design.



Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Simple and easy upgrade to failing OE transmission mounts. Perfectly balanced without compromising on the comfort and noise in the cabin.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309627

您正在查看的产品与这些编号存在交叉引用关系

租赁 IMS 钻孔工具用于安装 IMS 轴承



您可以从我们这里购买或租用此钻孔工具
用于安装我们的 62 毫米 IMS 套件代码：987997IMS62MM

成本
一旦工具返回给我们并经过检查，钻孔工具费用将退还。钻孔工具也可以直接购买，价格为 1895.00 英镑

有关 IMS 镗孔工具说明，请单击此处

RSS Tarmac Series Performance Transmission Mounts are on the 2015 PIRELLI WORLD CHALLENGE TC CHAMPIONSHIP Cayman!



SET OF 2

AVAILABLE FOR
Porsche 986 Boxster and 987 Boxster / 987 Cayman
FITS MODEL VARIANTS INCLUDING MK.1 & MK.2 with 6 Speed Manual or PDK Transmission.


• The RSS Tarmac Series Performance Transmission Mounts are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis.

• With factory Transmission mounts, the drivetrain will move independent of the chassis during acceleration, deceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.

• RSS Performance Transmission mounts minimize these effects by utilizing specialized polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback.

• This upgrade will NOT significantly affect ride quality or cause knock sensor issues commonly associated with solid transmission mounts.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

627

您正在查看的产品与这些编号存在交叉引用关系

Underdrive pulley.
replacement for OE 99710224101



Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use

Installation tool (wrench) and new OEM Pulley Washer included:

Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

MADE IN USA

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

608

您正在查看的产品与这些编号存在交叉引用关系

Underdrive Pulley for Porsche 996/997/Boxster 986
Replacement for OE 99610211562, 99610511563,



The RSS Lightweight High Strength Underdrive Pulley is made from 6061-T6 aluminum. A must for any street or track enthusiast

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.

• Installation wrench included.

• Works on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), 3.8L, DFI engines, GT2, GT3 and Turbo.

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 601 Kit)

Please read fitting instructions before purchase.


**Please note you will need a new shorter Pully Belt
99610215199/1
Under drive pulley w/ air conditioning - 2100mm

99610215198/1
Under drive pulley w/o air conditioning - 1905mm

Underderive Pulley Installation Instructions - CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

601

您正在查看的产品与这些编号存在交叉引用关系

适用于 MY97-08 发动机的旋装式机油滤清器适配器。
需要 K&N 过滤器 HP-1007

适合：

1997 年至 2008 年间的保时捷发动机

The Supplemental Tool kit is required for installation of the Single Row and Dual row IMS Solution and also for M96 /MY06-08 Upgrade - kit 106-08.30

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-08.21

您正在查看的产品与这些编号存在交叉引用关系

TRS Backflow Preventer (BFP) Remote Filter Adapter with integrated check valve & fittings.

Fitment:
Porsche 986 Boxster / Boxster S 1997 – 2004
Porsche 987 Boxster / Boxster S 2005 – 2008
Porsche 987C Cayman / Cayman S 2006 – 2008
Porsche 996 (911) Carrera / Carrera 4S 1998 – 2004
Porsche 997 (911) Carrera / Carrera S / Carrera 4S 2005 – 2008


PATENT PENDING. MADE IN U.S.A.

More and more we hear about connecting rod bearings seizing or cylinders becoming scored and destroying Porsche M96 and M97 engines. This all has to do with poor lubrication on banking and high speed corners which can result in high engine oil temperature and oil pump starvation. Introducing our newest component, the backflow preventer (BFP).

Our Remote Oil Filter Adapter Backflow Preventer (BFP) goes directly in place of the original factory oil filter canister allowing for ease of installation of lubrication & pressure accessories such as oil pressure compensator(s), external oil cooler(s) and a larger, metal oil filter element. Our (BFP) also eliminates restrictive filter size spin on oil filter adapters and sandwich plate options by combining the two into one component & integrating a backflow check valve. Two key benefits here is our (BFP) will provide a greater ground clearance allowing for a much larger remote mounted filter to be placed, which will provide a better oil filtration and flow for the engine assembly, as well as the ability to connect & install multiple oil lubrication & cooling accessories.

Some spin-on oil filter kits currently on the market go in place of the original filter canister area, eliminating the possibility of having multiple oil system accessories, forcing you to use either an oil cooler delete plate with external oil cooler, a spin on "sandwich adapter" in conjunction with the spin on filter adapter to connect an accessory OR nothing at all with simply a smaller filter. This will also create ground clearance issues having multiple components sandwiched together with the inclusion of the oil filter, especially on lowered vehicles. The only way to prevent a ground clearance issue on this setup is to use the smallest filter possible. If a spin on filter adapter & sandwich plate are used without the inclusion of a spin on oil filter, ground clearance will not be the issue at hand; the connection of multiple oil lubrication accessories becomes limited and the greater number of items to purchase increases to have the same oil kit solutions found with our (BFP) stage kits. A remote oil filter adapter and filter will still need to be placed. Save time and money with our (BFP).

A sandwich adapter combo with the spin-on oil filter will also require the use of an external oil check valve which has a maintenance life and will need to be replaced overtime. The (BFP)'s integrated check valve has a lifetime service life eliminating the need to replace a check valve.

Smaller filters are a lot more restrictive on their filtration and will have decreased service intervals. Compared to the original factory oil filter element and other smaller spin-on oil filters, the larger oil filter found on our (BFP) kits diminishes dry starts under cold cranking conditions due to its low restriction design & internal anti-drain back valve assuring immediate oil flow. The larger filter also has a greater burst pressure of up to 500psi designed to take pressure spikes in race engines that have higher oil pressure.

Simple. Easy. Reliable.

Lightweight Under drive Pulley is made from 6061-T6 aluminium. Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator.

Pulley outer diameter: 123mm (measured from ribs to ribs)

Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.

Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.

Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.

Replacement Pulley for Original Porsche parts No. 99610211563

Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987
Porsche Cayman 987C

**Please note you will need a new shorter Pully Belt which you can purchase from us.
99610215199/1
Under drive pulley w/ air conditioning - 2100mm

99610215198/1
Under drive pulley w/o air conditioning - 1905mm

Underderive Pulley Installation Instructions - CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609001601

您正在查看的产品与这些编号存在交叉引用关系

160F Low Temperature Thermostat HOUSING WITH INSERT & Gasket for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系

160F Low Temperature Thermostat housing without gasket / seal for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系