Front Sub frame

Centering sleeves subframe. 

Kit for front and rear subframes



Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Subframe centering sleeves for the 955/957/958 Cayenne

These sleeves are designed to prevent your subframe from shifting and throwing off alignment while off-roading. When the Volkswagen Audi Group designed the Gen1 chassis, they made the subframe mounting holes larger than the bolt diameter. This is to allow for shifting of the subframe, to adjust caster and camber, but hard driving can introduce unwanted shifts.  

Eurowise centering sleeves keep your subframe static by taking up the negative space around the bolt. 

Please Note:
A subframe drop is not a replacement for centering sleeves. They are solutions to separate problems. 
Subframe centering sleeves can be used in conjunction with Subframe Drop Kits.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EWORG1001S

您正在查看的产品与这些编号存在交叉引用关系

Front subframe mounting bush.



OEM Part Number: 7L0 599 035 A
OEM Part Number: 7P0 499 035
OEM Part Number: 955 341 133 01

Fits:
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10
Porsche 958 Cayenne 2011-18

Diagram ref no 5


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF85-1605

您正在查看的产品与这些编号存在交叉引用关系

Subframe drop kit 1 inch. 
Designed for use with 2.5” to 3” lift kits



Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. Used in conjunction with our 2.5” lift kit, a 1” Subframe Drop will result in nearly 0 degrees of axle angle.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1” Subframe Drop will decrease overall lift height by 0.5”. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1” Front Subframe Spacers w/ hardware x 4
1” Rear Subframe Spacers w/ hardware x 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EWORSF1

您正在查看的产品与这些编号存在交叉引用关系

Subframe drop kit 1 inch. 
Designed for use with 3.5”  and more lift kits



Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Porsche 958 Cayenne - 2010 to 2017

When lifting your vehicle the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 1.5” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. 
This level of Subframe Drop Kit is designed primarily for use in conjunction with our Eurowise, Eurowise+Bilstein, or Eurowise+JRZ coilovers.

Please Note: 
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.

A 1.5” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:
1.5” Front Subframe Spacers with hardware x 4
1.5” Rear Subframe Spacers with hardware x 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EWORSF15

您正在查看的产品与这些编号存在交叉引用关系

Subframe drop kit 1/2 inch. 
Designed for use with 2.5” steel spring or 2” air suspension lift kits



Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017

Our 1/2 inch Subframe Drop Kit is designed to use with our 2.5" steel spring or 2" air suspension lift kit. This is not a mandatory upgrade, however if you plan on doing heavy off-roading or driving in the lifted modes on air suspension vehicles we recommend it 

When lifting your vehicle, the angle & length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

2.5" inches of lift is the maximum lift that Gen 1&2 Cayenne, Touareg, and Q7s can achieve without stressing the OEM CV joints. On some vehicles, especially those with more worn components, 2.5” of lift is enough to cause CV joints to click. 

Our ½” Subframe Drop Kit is designed to eliminate CV joint clicking and improve axle geometry, to roughly 5 degrees, for vehicles with a 2.5” lift. 

Kit Includes:
½ inch Subframe Spacers with hardware x 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EWORSF5

您正在查看的产品与这些编号存在交叉引用关系

Subframe drop kit 2 inch. 
Designed for use with 4” lift kits or more



Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017

The 2" Subframe Drop Kit is the largest we offer and is designed for use with lift kits of 4” or more. 

When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.

Our 2” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues, and includes a steering shaft extension. This level of Subframe Drop Kit will bring the axle angle to nearly 5 degrees on 4” lifts.

Please Note: 

Eurowise Gas Tank Skid and Transfer Case Skids will not fit with a 2” subframe drop. If you currently have gas tank skids, you can cut the tabs off of each side and weld them on to the opposite sides to make them work. 

Exhaust modifications are required. Dropping the rear subframe 2” will cause it to contact your exhaust.

A 2” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.

Kit Includes:

2” Front Subframe Spacers with hardware x 4
2” Rear Subframe Spacers with hardware x 4
Steel Steering Shaft Extension with hardware x 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EWORSF2

您正在查看的产品与这些编号存在交叉引用关系