请稍候… 
我们正在处理您的订单,请稍候
请不要按返回按钮… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png +443456003478 https://www.design911.co.uk Facebook Instagram

前侧车顶支架

显示从1到5(共5个产品)
用于 2 英寸空气悬架的提升套件垫片套件。保时捷 955 卡宴 / 957 卡宴
代码: EWOCTQLK20
用于 2 英寸空气悬架的提升套件垫片套件。
前后悬架套件

#欧洲明智#

适合:

保时捷 955 卡宴 - 2003 年至 2006 年
保时捷 957 卡宴 - 2007 年至 2010 年

适用于带空气悬架的 955/957 保时捷卡宴的 2 英寸举升套件。

适用于重型越野道路的防弹螺栓固定式解决方案,无论是在沙丘中还是在极端环境中的岩石爬行中。为了确保零故障,我们用更大、更宽、更厚的单元替换了薄弱的 OEM 支柱支架。

可以拆除防倾杆以进行额外的铰接,或者使用我们的 Eurowise 防倾杆链接来保留防倾杆。 OEM 防倾杆连杆不会脱离加固支架。

以正确的方式举升车辆,保持行驶质量,而无需在“越野”模式下运行车辆。

建议专业安装。
必须在悬架负载的情况下拧紧支柱螺栓。

免责声明:
我们建议无论公路还是越野,始终以“自动”模式驾驶。使用举升套件在“越野”模式下行驶可能会对车轴接头造成长期损坏,因为它们在“越野”模式下会遇到极端的角度。

为了纠正这种几何形状,建议安装我们的 Eurowise 副车架下垂套件。

套件包括:
带硬件的前支柱支架 x 4
带硬件的后支架下降垫片 x 4
液位传感器与硬件连接 x 4

稳定杆连杆采用钢结构,表面镀锌



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

EWOCTQLK20
95534306900
95534301800
95533301530
95534301810

您正在查看的产品与这些编号存在交叉引用关系
特价
Lift kit spacer set for air suspension 3 inch. Porsche 955 Cayenne / 957 Cayenne
代码: EWOCTQLK02
Lift kit spacer set for air suspension 3 inch. 
Set of for Front and Rear suspension

eurowise

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3"+ Lift Kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty offroading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we machine our spacers out of solid block 6061 aluminum and replace the weak OEM strut brackets with bigger, wider, and thicker units. 

To achieve 3” of total lift in auto mode, our 3” Air Suspension Lift Kit includes everything from our 2” Air Suspension Lift Kit plus Front Upper Shock Mount Spacers, Front Sway Bar Links, and our 1.5” Subframe Drop Spacer Kit.

On some vehicles, a 3” lift will introduce more positive camber that can be adjusted out with OEM upper control arms. For such applications, we recommend adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended. 

Strut bolts MUST be tightened with the suspension loaded. This is otherwise a direct bolt-on kit that requires only removal of front and rear strut assemblies, and dropping the rear cradle and front subframe.

Disclaimer: 
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. Eurowise is not responsible for damage to axles that occurs due to driving in modes higher than “auto.” Noise from rear suspension may occur due to worn rear air strut mounting bushings. If you experience such noise, Eurowise can supply shorter bushings to resolve the issue.

Due to the design of the suspension geometry adding additional lift will cause the air strut plastic bellow to touch the spindle at full droop only. If you see contact on the lift with the suspension fully drooped it is normal. 

Note: 
This lift kit will max out the suspension level sensor’s functional range. The highest setting on the air suspension controller will no longer lift it any higher.

Kit Includes:
Front Strut Brackets with Hardware x 4
Level Sensor Links with Hardware x 4
Front Upper Shock Mount Spacers with Hardware x 6
Front Sway Bar Links x 2
1.5" Subframe Drop Kit with Hardware x 1



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

EWOCTQLK02
95534306900
95534301800
95533301530
95534301810

您正在查看的产品与这些编号存在交叉引用关系
特价
Lift kit spacer set for steel springs 2.5 inch. Porsche 955 Cayenne / 957 Cayenne
代码: EWOCTQLK01
Lift kit spacer set for steel springs 2.5 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)

eurowise

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

2.5” lift kit for 955/957 Porsche Cayenne with steel, spring suspension.

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit that easily installs over the top of the OEM struts. 

2.5” of lift is the maximum allowable lift without dropping the subframe to compensate for shifts in axle geometry. On some vehicles, especially those with more worn components, CV joints will click unless geometry is corrected with a Eurowise ½” Subframe Drop. 

Professional installation recommended.

For air suspension cars, see: Air Suspension Lift Kit

Kit Includes:
Front Spacers with hardware x 2
Rear Spacers with hardware x 2

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height. Do not be alarmed if your spacer is not 2.5” thick.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

EWOCTQLK01
95534307110
95534301800
95533307100
95533301900

您正在查看的产品与这些编号存在交叉引用关系
特价
Lift kit spacer set for steel springs 3 inch. Porsche 955 Cayenne / 957 Cayenne
代码: EWOCTQLK03
Lift kit spacer set for steel springs 3 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)

eurowise

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3” Lift Kit for 1st Gen Porsche Cayenne with steel spring suspension.

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit that installs over the top of the OEM struts. 3” Lift kit includes 3” Lift Spacers and our 1” Subframe Drop, to correct axle geometry and prevent clicking from CV joints.

On some vehicles, a 3” lift will introduce more positive camber than can be adjusted out with OEM upper control arms. Dial it back in by adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended.

For air suspension cars, see: Air Suspension Lift Kit 

Kit Includes:
3 inch Front Spacers with Hardware x 2
3 inch Rear Spacers with Hardware x x
1” inch Subframe Drop Spacers with Hardware x 2

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

EWOCTQLK03
95534307110
95534301800
95533307100
95533301900

您正在查看的产品与这些编号存在交叉引用关系
特价
Lift kit spacer set for steel springs 4 inch. Porsche 955 Cayenne / 957 Cayenne
代码: EWOCTQLK10
Lift kit spacer set for steel springs 4 inch. 
Set of 4 lift spacers (2 x ft / 2 x Rr)
Set of 4 subframe spacers (2 x ft / 2 x Rr)

eurowise

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 4” Lift Kit for 955/957 Porsche Cayenne with steel spring suspension.

Machined from solid 6061 aluminum, these lift kits will never wear out or fail. This is a direct bolt-on lift kit. 4” Lift kit includes 2.5” Lift Spacers, 1” Upper Strut Drop Spacers, 1” Subframe Drop Spacers, and 1” Rear Cradle Drop Spacers

For lifts of 4”, retention of the sway bar requires our Spherical Front Sway Bar Links. A 4" lift will also introduce more positive camber than can be adjusted out with OEM upper control arms. It is highly recommended that anyone with a 4" lift also install our Eurowise Tubular Upper Control Arms or Eurowise Adjustable Tubular Upper Control Arms.

Professional installation is highly recommended. 
Strut bolts MUST be tightened with the suspension loaded, or strut extenders and coil overs can fail.

For air suspension cars, see: Air Suspension Lift Kit

Kit Includes:
2.5 inch Front Spacers with Hardware x 2
2.5 inch Rear Spacers with Hardware x 2
Front Upper Strut Mount Drop Spacers with Hardware x 2
Rear Upper Strut Mount Drop Spacers with Hardware x 2
Rear Cradle Drop Spacers with Hardware x 1
1 inch Subframe Drop Spacers with Hardware x 1
Exhaust Drop Spacers x 1

Please Note:
The physical thickness of the billet spacers does not reflect the actual lift height.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

EWOCTQLK10
95534307110
95534301800
95533307100
95533301900

您正在查看的产品与这些编号存在交叉引用关系
特价
显示从1到5(共5个产品)
也可在这些页面找到
关于前侧车顶支架

使用高性能顶部支架增强您的保时捷悬架:技术规格和优势

高性能悬挂顶部支架的技术规格:

  • 性能悬架上支座(也称为支柱支座或轴承板)是将悬架支柱连接到保时捷底盘的部件。
  • 它们通常由铝合金或增强橡胶等高质量材料制成。
  • 与标准支架相比,性能顶部支架具有更坚固的结构和改进的设计,从而提供了增强的性能和耐用性。
  • 它们具有多种设计和选项,以适合不同的保时捷车型和悬架设置。
  • 性能悬架上支架可作为保时捷车辆的售后升级或标准替换件。

升级或更换保时捷性能悬架顶部支架的好处:

改善操纵性和稳定性:性能顶部支架提供更高的刚度和精度,增强车辆在转弯和高速操纵时的操纵特性和整体稳定性。

增强的悬架反馈:升级到性能支架可改善悬架反馈,使驾驶员能够更好地感知和响应道路状况,从而带来更具吸引力的驾驶体验。

降低噪音、振动和声振粗糙度 (NVH):更坚固的顶部支架有助于最大限度地减少传输到底盘的不必要的振动和噪音,从而带来更平稳、更舒适的乘坐体验。

增强的悬架几何结构:性能顶部支架可进行精确的校准调整,优化悬架几何结构,从而改善轮胎磨损、牵引力和转弯性能。

提高耐用性:性能顶部支架旨在承受更高的负载,与标准支架相比,耐用性更高,即使在苛刻的驾驶条件下也能确保长使用寿命。

在 Design911,我们专门为您的保时捷提供合适的零件和专业建议。我们提供专为保时捷车型设计的各种高性能悬架上支架,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的悬架要求帮助您选择合适的上支架。我们了解在性能和舒适性之间找到适当平衡的重要性,我们可以指导您选择最适合您需求的最佳上支架。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提升保时捷的悬架性能、操控性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。

您可能也喜欢
流行车型