Brembo 运动刹车片

Brake Pad size: Width: 121mm / Thickness: 17mm / Height: 60mm
Information about Brake Pad Size

This Product Fits:

Porsche 911 (997) 3.6L Carrera S / 3.8L Carrera 4S 07.2004>> REAR


Porsche BOXSTER (987) S 3.2L / S 3.4L 07.2006>> FRONT
Porsche BOXSTER (987) S 3.4L 06.2009>> FRONT

Porsche CAYMAN (987) S 3.4L 11.2005>> FRONT
Porsche CAYMAN (987) S 3.4L Sport 06.2009>> FRONT
Porsche CAYMAN (987) S 3.4L 02.2009>> FRONT
Porsche CAYMAN (987) R 3.4L 11.2005-11.2009 FRONT
Porsche CAYMAN (987) R 3.4L 11.2010>> FRONT

Porsche 911 (997) 3.8L Carrera S / 3.8L Carrera 4S 08.2005>> FRONT
Porsche CAYMAN (987) S 3.4L 02.2009>> FRONT

* Note when fitting these parts to: Cayman 987 / Boxster 987 you willl all need
Pin kit 9553529600
Sensor L 99761275601
Sensor R 99761275901

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31485

您正在查看的产品与这些编号存在交叉引用关系

This Product Fits: Width: 112mm / Thickness: 16mm / Height: 73mm
Information about Brake Pad Size

This Product Fits:

Porsche 911 (996) 3.4L / 3.6L C2, C4 09.1997 - 08.2005 Rear Disc Diameter 299mm REAR

Porsche 911 (997) 3.6L Carrera, 3.6L Carrera 4 07.2004>> REAR

Porsche BOXSTER (986) 2.5L / 2.7L 08.1996 - 11.2004 REAR
Porsche BOXSTER (986) S 3.2L 08.1999 - 11.2004 REAR
Porsche BOXSTER (987) 2.7L / 2.9L 11.2004 - 12.2011 REAR
Porsche BOXSTER (987) S 3.2L / S 3.4L 07.2006 - 05.2009 REAR

Porsche CAYMAN (987) 2.7L 07.2006 - 12.2009 REAR
Porsche CAYMAN (987) R 3.4L, S 3.4L, S 3.4L Sport 11.2010 - 06.2013 REAR

Please also use brake pad sensor 98661236501/1 x 2

PLEASE NOTE:
If you require fitting kit for this please Click here

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31514

您正在查看的产品与这些编号存在交叉引用关系

This Product Fits: Width: 114mm / Thickness: 16mm / Height: 78mm
Information about Brake Pad Size

This Product Fits:

Porsche 986 Boxster 2.5/2.7 1997-05 FRONT
Porsche 987 Boxster 2.7 2005>> FRONT

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31418

您正在查看的产品与这些编号存在交叉引用关系

Brake Pad size: Width: 121mm / Thickness: 17mm / Height: 59mm
Information about Brake Pad Size

This Product Fits:

Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 996 3.4/3.6 97-05 Front


Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 996 GT3 RS 02-05 Rear

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31415

您正在查看的产品与这些编号存在交叉引用关系

Brake Pad size: Width: 199mm / Thickness
19mm / Height: 67mm
Information about Brake Pad Size

This Product Fits:

Porsche 911 (991) 3.8L Carrera 4 09.2010-12.2011 FRONT
BOXSTER (981) 2.7L 195 04/2012 FRONT
BOXSTER (981) GTS 3.4L 243 02/2014 FRONT
BOXSTER (981) S 3.4L 232 04/2012 FRONT
BOXSTER Spyder (981) 3.8L 276 07/2015 FRONT
CAYMAN (981) 2.7L 202 03/2013 FRONT
CAYMAN (981) GTS 3.4L 250 02/2014 FRONT
CAYMAN (981) S 3.4L 239 03/2013 FRONT


Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31486

您正在查看的产品与这些编号存在交叉引用关系

Brake Pad size: Width: 114mm / Thickness: 16mm / Height: 73mm
Information about
Brake Pad Size

This Product Fits:

Porsche Boxster (987) 2.7ltr, 2.9ltr, 3.4ltr
Porsche Boxster (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>>Rear
Porsche Boxster (718) 2.0ltr, 2.5ltrRear
Porsche Boxster Spyder (718) 4.0ltrRear

Porsche Cayman (987) 2.7ltr, 2.9ltr, 3.4ltrRear
Porsche Cayman (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>>Rear
Porsche Cayman (718) 2.0ltr, 2.5ltrRear
Porsche GT4 (718) 4.0ltrRear

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

07B31536

您正在查看的产品与这些编号存在交叉引用关系

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L


Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TS-917-4

您正在查看的产品与这些编号存在交叉引用关系

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 986 Boxster 2.5/2.7 97-05 Rear
Porsche 986 Boxster S 3.2 99-05 Rear
Porsche 987 Boxster 2.7 05>> Rear
Porsche 987 Boxster S 3.2 05>> Rear
Porsche 987C Cayman 06>> Rear
Porsche 996 3.4/3.6 97-05 Rear
Porsche 997 C2/C4 05-09 Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TS-738-4

您正在查看的产品与这些编号存在交叉引用关系

Titanium Brake pad heat shields, Front.

This Product Fits:

Porsche 981, 718 Cayman base, S and GTS (2.5L turbo)
does not fit GT4 or GTS 4.0 cars

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)