所有消音器/消声器
- Porsche 991 Carrera 2 3.0升(370马力)
- Porsche 991 Carrera 2S 3.0L(420马力)
- Porsche 991 Carrera 4 3.0升(370马力)
- Porsche 991 Carrera 4S 3.0L(420马力)
- Porsche 991 敞篷车 2 3.0 升(370 马力)
- Porsche 991 Cabriolet 2S 3.0L(420马力)
- Porsche 991 敞篷车 4 3.0 升(370 马力)
- Porsche 991 敞篷车 4S 3.0L(420 马力)
- Porsche 991 Targa 4 3.0升(370马力)
- Porsche 991 Targa 4S 3.0L(420马力)
- Porsche 991 Turbo Coupe 3.8L(540 马力)
- Porsche 991 Turbo S Coupe 3.8L(580 马力)
- Porsche 991 Turbo 敞篷车 3.8L(540 马力)
- Porsche 991 Turbo S 敞篷车 3.8L(580 马力)
- Porsche 991 Speedster 4.0L(510马力)
- Porsche 991 GT3 4.0L(500 马力)/ GT3 RS 4.0L(520 马力)
- Porsche 991 GT2 RS 3.8L PDK(700马力)
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E-PO
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
MTP-PO997GT3H
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Superb dual-tone sports car sound; throaty and deep at idle and medium speeds
FEATURES:
• Fits all Porsche 991.2 GT3 / GT3 RS vehicles 2017+
• Mini Maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse TIG welded using 2000 degree ceramic fiber and stainless steel wool packing.
• Constructed from high quality 14-16 gauge, C.N.C. mandrel bent T304L stainless steel
• Retains Sport Mode button functionality when used in conjunction with factory side mufflers
• Simple bolt-on installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR9912GT3CMAX
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
DesignTek Titanium sports exhaust system.
Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3601173170
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
FEATURES:
• Fits all Porsche 991.2 Carrera base models equipped with standard exhaust; does not fit with PSE (2016+); only fits S models as part of a complete exhaust package.
• Greatly improves horsepower and torque
• Dramatic improvement in sports car sound and power throughout the RPM range
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Direct bolt-on replacement for the factory center muffler
• All Fabspeed performance products are backed by the Fabspeed Limited Lifetime Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606609136
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
High performance free-flowing X-pipe with catalyst bypass and tips replaces the heavy and restrictive factory rear mufflers and catalytic converters for improved power and fantastic sound.
FEATURES:
• Fits all 991.2 Turbo / Turbo S vehicles (2017+)
• NOTE: Fabspeed's Supersport X-Pipe RACE application includes cat bypass pipes with O2 bungs in the factory position, and is recommended for Off-Road Track Use Only
• Dramatic improvement in sports car sound and power throughout the RPM range
• Includes Deluxe Quad Style Tips in Polished Chrome finish; also available with polished GT2 Style Tips
• Constructed from high-quality 14-16ga C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR9912TSSRX
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
High performance free-flowing X-pipe with sport catalytic converters and tips replaces the heavy and restrictive factory rear mufflers and catalytic converters for improved power and fantastic sound; includes 200-cell HJS Sport Cats and Deluxe Quad-Style Tips.
FEATURES:
• Fits: all 991.2 Turbo / Turbo S vehicles (2017+)
• NOTE: Fabspeed's Supersport X-Pipe STREET application includes high performance 200-cell HJS Sport Catalytic Converters for improved flow and exhaust sound
• Dramatic improvement in sports car sound and power throughout the RPM range
Includes Deluxe Quad Style Tips in Polished Chrome finish; also available with polished GT2 Style Tips
• Constructed from high-quality 14-16ga C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR9912TSSSX
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Optimized design that replaces the heavy and restrictive factory side mufflers for improved exhaust flow, increased sound and weight savings.
Utilizing premium Helical valves along with the addition of O2 bungs, Fabspeed's Side Muffler Bypass Pipes provide the ultimate track solution for the 991.2 GT3 / GT3 RS. When accompanied with our new Long Tube Competition Headers, our Side Muffler Bypass Pipes allow the maximum amount of exhaust flow possible from the 991.2 GT3 / GT3 RS engine.
HELICAL VALVES
We chose to use Helical Valves on our 991.2 GT3 / GT3 RS track exhaust systems for their unprecedented quality - which have been proven by many OEM manufacturers such as McLaren, Ferrari, Lamborghini, and many more. Helical valves are an integral part of our Side Muffler Bypass pipes, opening and closing with precision to control the gas flow and optimizing engine back-pressure for improved performance. Helical's extensive experience in high-volume OEM automotive applications has led to standard features such as an extremely durable pneumatic actuator, precision flat sealing faces inside the valve, stiffening ribs and high-temperature bearings at both ends of the butterfly spindle.
O2 BUNGS
We relocated the O2 bungs from the collector of the headers to the Side Muffler Bypass Pipes in order to maintain factory-like functionality with our Long Tube Competition Headers - allowing them to read all cylinders while maximizing the performance of the collector. This design will replace our existing SMBP's allowing you to upgrade to our Long Tube Race Header design at any time in the future.
FEATURES:
• Fits all Porsche 991.2 GT3 / GT3 RS vehicles (2017+)
• Highest quality Helical valves
• Includes O2 bungs for factory like functionality when paired with Fabspeed Long Tube Competition Race Headers
• Saves 34 lbs from the rear of the vehicle
• Replicates aggressive CUP car sound for the street
14-16ga T304 Stainless Steel construction
• Simple bolt-on installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR9912GT3SMB
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here 9996001111
For Wiring Diagram please CLICK HERE
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606009103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Only for cars with Porsche Sports Exhaust (PSE)
Fits
Porsche 991.2 Carrera with PSE
Porsche 991.2 Carrera S with PSE
Porsche 991.2 GTS with PSE
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual. Replaces rear silencer/muffler
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on.
In this case, the installer must reprogram the software to eliminate the light
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TSPO991T16.003.A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TSPO991T13.001.A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TSPO991T13.004.AK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Fits
991.1 and 991.2
Porsche 991 turbo
Porsche 991 turbo S
The muffler can be fitted on all 911 Turbo and Turbo S versions, both 991.1 and 991.2
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Material: Stainless Steel 304
Replacement for Genuine muffler 991.111.048.81
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606609140
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Material: Stainless Steel 304
Replacement for Genuine muffler 991.111.048.81
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606609145
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Replaces rear side silencers with straight pipes
Fits:
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits
Porsche 991.2 Carrera 2015-2019
NOT S
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera exhaust system differs from the Carrera S one in that it does not have bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
Fits
Porsche 991.2 Carrera S 2015-2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera S exhaust system differs from the Carrera one in that it is equipped with bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
With modified rear silencers and 2 centrally arranged tailpipes in unique design, high-gloss Silver or Black.
Please note:
The tailpipes are not included in the scope of supply and must be ordered separately:
- Part number for high-gloss Silver tailpipes: 99104420024
- Part number for high-gloss Black tailpipe: 99104420025
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99104420030
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
适合:
所有配备真空操纵的 Valvetronic 排气系统的保时捷车型
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9996001111
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
High quality titanium exhaust rear section compatible with OE rear mufflers. Complimented by carbon fibre tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606609124
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 991 Turbo | Turbo S
X-PIPE Race Exhaust cat back system. Advantages of X-PIPE RACE. Considerable weight reduction! Extreme reduction of thermals by low exhaust back pressure! Incredible Turbosound. Performance enhancement and more torque.
No CEL (Check Engine Light) Horsepower and torque increased up without software upgrade Deep aggressive exhaust sound.
Reduced backpressure & Reduced temperature. Significant weight savings over the stock system.
Direct bolt on replacement with all hardware and clamps included. The exhaust fits the original tailpipe sets.
100% Made in Germany
This X-pipe race exhaust is delivered included mounting material.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.20.4080
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
标题:升级保时捷排气系统:原装保时捷与售后消声器和运动型排气系统
关键词:保时捷、排气消声器、运动型排气、升级、更换、技术规格、已知问题、Design911、专业建议
概括:
原装保时捷排气消声器:
由保时捷为特定车型设计和制造
按照严格的质量标准设计
精确调整以获得最佳性能和声音
保持保时捷的真实性和原创性
与现有组件和系统兼容
售后排气消声器:
由专门从事性能升级的第三方制造商生产
提供多种定制选择
可以增强排气音、性能和美观度
可以提供更好的流动动力学以提高发动机效率
考虑与您的保时捷车型的兼容性和适合性
运动型排气系统:
旨在最大程度提高性能并增强驾驶体验
通常包括更大直径的管道、更具运动感的消声器和优化的气流
提供更大的马力和扭矩
产生更具侵略性和令人振奋的排气声音
查看当地有关噪音限制的法规
在考虑为您的保时捷购买排气消声器或运动型排气管时,应考虑几个因素。首先,确定您的具体要求,无论是声音的轻微改善还是性能的显著提升。研究所选排气系统与您的保时捷车型的技术规格和兼容性。考虑您的预算和制造商或零售商的声誉。确保产品有保修或担保至关重要。
在 Design911,我们可以帮助您找到适合您的保时捷的排气管部件。我们知识渊博的团队可以根据您的要求提供专业建议,并指导您完成选择过程。我们备有各种原装保时捷零件以及信誉良好的售后市场选项,确保您能够获得高质量的选择。相信 Design911 可以帮助您提升保时捷的性能并提供无与伦比的驾驶体验。
注意:以上摘要概述了升级保时捷车辆排气系统的好处和注意事项。在进行任何修改之前,始终建议咨询专业人士并考虑个别车辆的规格和法规。