Brake line Rear Left. Porsche 944 1985-86  ›  94435503501

Brake Line, Rear Left.

Fits

• Porsche 944 2.5L 8V 1982-86
• Porsche 944 Turbo 2.5L 8V 1985-86

Diagram Ref No 10

Before ordering, verify the vehicle model, production year and engine specification. Use the VIN to confirm suitability where production changes or braking equipment affect the required line.

What This Product Does

Pedal operation produces hydraulic pressure, which the line conveys between connected brake components. Its connections must remain sealed so that fluid stays within the circuit. This product is a brake line, not a replacement master cylinder.

Functions

• Conveys brake fluid under pressure.
• Provides a hydraulic connection between brake components.
• Forms part of the sealed fluid circuit.

Technical Details

• Component: hydraulic brake line.
• Specified side: Left.
• Brand: Porsche; genuine component.
• Part reference: 94435503501.
• Supplied application: Porsche 944, 1985–86; catalogue coverage up to model year 1986.
• Catalogue quantity required: one.

Symptoms of Fault

Inspect the pipe for corrosion, distortion and other damage. Fluid at a union or along the line, a declining reservoir level, or a pedal that feels soft or inconsistent can warrant investigation. These signs do not identify the line as the cause on their own; the surrounding hydraulic components also require assessment.

Why Replacement Matters

Leakage from a deteriorated pipe or connection can allow fluid to escape and reduce retained hydraulic pressure. Renew the line when inspection confirms corrosion, damage or a leak. Follow the applicable workshop instructions for installation, refilling, bleeding and leak checks, and examine nearby hoses, unions, retaining clips and supporting fixings during the repair.

FAQs

Is the part genuine Porsche?
Yes. The supplied information identifies reference 94435503501 as a genuine Porsche component.

Which side is specified?
Left. Confirm the routing and connections against the existing pipe and vehicle-specific parts information.

Is bleeding necessary after replacement?
Yes. Once the circuit has been opened, refill and bleed it according to the relevant workshop procedure, then check the completed connections for leakage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94435503501

The product you are viewing cross references to these numbers