Rear Bumper Securing Strip, Centre. Porsche 970.2 Panamera 2014-16 › 97050564102

This Porsche securing strip attaches at the centre of the rear bumper on the listed 970.2 Panamera models from 2014–16. Not for Panamera S E-Hybrid

Fits

• 970.2 Panamera V6 3.6L 2WD (310Hp) 2014–16
• 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014–16
• 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014–16
• 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014–16
• 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014–16
• 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014–16
• 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014–16
• 970.2 Panamera Turbo V8 4.8L (520Hp) 2014–16
• 970.2 Panamera Turbo V8 Executive 2014–16
• 970.2 Panamera Turbo S V8 4.8L 2014–16
• 970.2 Panamera Diesel V6 3.0L (250Hp) 2014–16

What This Product Does

The attachment strip retains the central portion of the bumper covering or associated trim. Its mounting role helps the covering remain aligned with neighbouring panels. It is a securing component rather than a complete bumper, reinforcement bar or exterior trim assembly.

Functions

• Retains the bumper assembly at its central attachment location.
• Supports positioning of the covering and adjoining trim.
• Provides replacement attachment hardware when the original strip is damaged or absent.

Technical Details

• Manufacturer identification: Porsche.
• Product reference: 97050564102.
• Diagram wording: Securing strip Basic; also described as an attachment strip.
• Installation location: centre, rear bumper.
• Application context: second-generation Panamera 970 (G1), PR:0E1,0E2.
• Quantity shown in the diagram: 1.

Symptoms of Fault

• Movement at the bumper covering’s central attachment.
• Panel gaps that become uneven around the bumper.
• Rattles near the strip or its mounting points.
• Visible cracks, distortion or absent attachment points.
• Fixings that cannot retain the covering firmly.

Why Replacement Matters

Renewing a defective strip helps re-establish the intended attachment arrangement during bumper repairs. A distorted or broken component may leave the covering incorrectly positioned even when neighbouring supports are intact. Check the surrounding clips, nuts and supports during dismantling, and renew any damaged or corroded hardware as needed.

FAQs

Where does the strip fit?
The diagram places this component at the centre of the rear bumper, rather than on either side.

What quantity does the diagram specify?
The supplied assembly information records one securing strip.

Can existing fasteners be retained?
Assess their condition when dismantling the bumper. Damaged, corroded or ineffective fixings should be renewed; do not assume that replacing the strip alone resolves faults elsewhere in the mounting assembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97050564102

The product you are viewing cross references to these numbers