Original Porsche Part Genuine Porsche part 35624309

Handbrake cable clip.

Fits:
Porsche 356 / 356 A/540.1 1950-59
Porsche 356 B / 356 Carrera 2000 1960-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 31

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624309

The product you are viewing cross references to these numbers

Handbrake Cable Holder - Aluminium. 
Restore secure routing of the handbrake cable with this OE Match Handbrake Cable Holder – Aluminium, manufactured as a direct replacement. Produced to OE-style specifications, this aluminium cable holder is designed to securely locate and support the handbrake cable, ensuring correct alignment and preventing unnecessary movement during operation. Precision manufactured from high-quality aluminium for excellent strength, corrosion resistance, and durability, it provides an accurate fit for Porsche maintenance, repairs, and restoration projects.

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 24

The handbrake cable holder plays an important role in maintaining the correct routing of the parking brake cable, helping to ensure smooth cable movement and consistent handbrake operation. Over time, the original holder can become damaged, corroded, or distorted through age, vibration, or impact, allowing the cable to move out of position and increasing wear on both the cable and surrounding components. Replacing a worn holder restores proper cable support and contributes to reliable parking brake performance, making this OE Match component an ideal choice for Porsche maintenance, repairs, and restoration projects.  

What This Product Does:

• Secures the handbrake cable in its correct position.
• Maintains proper cable routing beneath the vehicle.
• Prevents unnecessary cable movement and vibration.
• Reduces wear on the handbrake cable and surrounding components.
• Supports smooth and consistent parking brake operation.
• Replaces damaged, corroded, or distorted cable holders.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Loose or poorly supported handbrake cable.
• Corroded or damaged aluminium cable holder.
• Distorted or cracked mounting bracket.
• Excessive movement or vibration of the handbrake cable.
• Premature wear to the handbrake cable outer casing.
• Rattling noises from beneath the vehicle.
• Damage identified during brake or underbody servicing.

Why Replacement Matters:

• The handbrake cable holder is a small but essential component that keeps the parking brake cable correctly aligned and securely supported throughout its length. If the holder becomes damaged or corroded, the cable can move excessively, causing increased wear, inconsistent handbrake operation, and unnecessary strain on the cable and associated brake components.
• Replacing a worn handbrake cable holder restores the correct cable routing, helping to ensure smooth parking brake operation while protecting the cable from premature wear. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Handbrake Cable Holder – Aluminium provides reliable fit, performance, and durability for Porsche maintenance, repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624308

The product you are viewing cross references to these numbers

Gearshift lever boot.

Fits:
Porsche 356 /A 1.1-1.6 01/50-12/61

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99965901840

The product you are viewing cross references to these numbers

Gearshift Lever Boot 

OE Match gearshift lever boot for Porsche 356 and 356A models from 1950 to 1961. Designed as an original-style replacement, this flexible protective boot fits around the base of the gear lever, helping prevent dirt, dust and moisture from entering the gearshift mechanism.

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59

Diagram ref no 11

Manufactured to replicate the fit and function of the original component, the boot provides a neat, period-correct finish to the gear lever assembly. It is ideal for replacing an aged, cracked, split or missing original boot during routine maintenance or classic Porsche restoration.

What Does the Gearshift Lever Boot Do?

The gearshift lever boot forms a protective barrier around the base of the manual gear lever, helping keep dust, dirt and moisture away from the gearshift mechanism.

Its flexible construction allows the gear lever to move freely during gear selection while helping reduce the transfer of unwanted noise and draughts into the passenger compartment.

The boot also provides a tidy, original-style finish around the gear lever, maintaining the authentic appearance of the classic Porsche interior.

Why Does It Fail?

Over time, the original gearshift lever boot can deteriorate due to age, repeated movement and environmental exposure.

Common causes of failure include:

• Rubber hardening and loss of flexibility
• Cracking or splitting through age
• Repeated movement of the gear lever
• Heat and temperature changes
• Exposure to dirt, moisture and cleaning chemicals
• Damage during previous gearshift repairs
• General wear and deterioration

Once the boot becomes brittle or damaged, it may no longer provide an effective protective barrier around the gearshift assembly.

When Should It Be Replaced?

Replacement is recommended if the existing gearshift boot shows any of the following:

• Visible cracks or splits
• Hardened or brittle material
• Loose or poor fitting around the gear lever
• Missing or damaged sections
• Excessive dirt entering the gearshift mechanism
• An untidy or deteriorated appearance

The boot should also be inspected whenever the gearshift lever or associated linkage components are removed for servicing.

Checks During Replacement

When replacing the gearshift lever boot, also inspect:

• Gearshift lever and mounting
• Gearshift lever bushes
• Gearshift stop plate
• Gearshift linkage and couplings
• Associated retaining components
• Surrounding transmission tunnel area

Any worn or damaged gearshift components should be repaired or replaced to maintain correct gear selection and smooth operation.

Porsche 356 / 356A Gearshift Boots & Gear Lever Components

The gearshift lever boot is an important protective component within the classic Porsche 356 gearshift assembly. Positioned around the base of the gear lever, it helps prevent dirt, dust and moisture from reaching the internal linkage while maintaining the original appearance of the vehicle's interior.

After decades of use, original rubber boots can become hard, cracked or split, reducing their effectiveness and leaving the gearshift mechanism exposed to contamination. Replacing a deteriorated boot helps preserve the condition of the surrounding components and restores a clean, factory-style finish.

OE Match 99965901840 provides an original-style replacement for Porsche 356 and 356A models, making it suitable for routine repairs, interior refurbishment and complete vehicle restoration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99965901840

The product you are viewing cross references to these numbers

Clip for securing the hand brake cable. Introducing the enhanced emergency parking brake cable strap coupling designed specifically for Porsche 356 Pre A to Porsche 356 B T6 models manufactured between 1950 and 1963. This innovative device serves as a protective cover over the e-brake coupling located in the tunnel, where the single front cable splits into the rear cables. Its primary function is to securely hold the three cables in place within the coupling, ensuring optimal brake performance. The ingeniously designed coupling incorporates rear tabs equipped with two holes, facilitating easy attachment of the tension spring. This spring serves to maintain the necessary tension for smooth and efficient brake operation.

With this upgraded emergency parking brake cable strap coupling, Porsche 356 owners can experience enhanced safety and reliability during their driving experience, ensuring the braking system performs optimally across various road conditions.

Fits:
Porsche 356 Pre A (1948 - 1955)
Porsche 356 A (1956 - 1959)
Porsche 356 B (1960 - 1963)

Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624309

The product you are viewing cross references to these numbers