do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Porsche
Stabilizer bar bush. This part number supersedes to PCG41602 Genuine Porsche part 64441602
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Fits:
Porsche 356 A 1950-59
Porsche 356 B / C 1960-65
Click 'Zoom in' for large parts diagram.
Diagram ref no 64
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441606
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A 1950-59
Porsche 356 B / C 1960-65
Diagram ref no 68 & 64
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441606
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Stabilizer Bar Bush, Front
Sold each – 4 required per car
The OE Match Front Stabilizer Bar Bush is a replacement
suspension rubber designed for the front anti-roll bar assembly of applicable
Porsche 356 models.
Fits:
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 62
It helps cushion the stabilizer bar mounting points, reducing unwanted vibration and movement while maintaining correct suspension operation.
Confirm compatibility with the original suspension configuration before ordering.
What Does It Do?
The stabilizer bar bush cushions the connection between the anti-roll bar and its mounting components, allowing controlled movement while helping reduce noise and vibration.
Why Does It Fail?
Common causes include:
- Rubber hardening with age
- Cracking or splitting
- Repeated suspension movement
- Exposure to oil, moisture and road dirt
- Compression and loss of flexibility
When Should It Be Replaced?
Replace if the bush is cracked, flattened, loose or deteriorated.
Worn bushes may contribute to suspension knocking, excessive stabilizer bar movement or reduced handling precision.
Checks & Diagnosis
Inspect the bushes and associated stabilizer bar mounting hardware for wear, cracking or looseness.
Check the anti-roll bar, brackets and surrounding suspension components for damage before installation.
Key Features
- OE Match replacement stabilizer bar bush
- Designed for applicable Porsche 356 front suspension assemblies
- Helps cushion stabilizer bar movement
- Reduces unwanted noise and vibration
- Suitable for classic Porsche suspension restoration
- Sold individually – 4 required per car
Porsche 356 Front Stabilizer Bar Bushes & Suspension Parts
Front stabilizer bar bushes are important components of the Porsche 356 suspension system, helping maintain controlled anti-roll bar movement and reduce unwanted vibration.
Replacing deteriorated bushes helps restore secure mounting and maintain consistent suspension performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441602
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356, 356A, 356B and 356C models
Click 'Zoom in' for large parts diagram.
Diagram ref no 63
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441601
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Steel Sleeve for Anti-Roll Bar Shackle Bushing
Sold each - 2 required per car
The OE Match Steel Sleeve is a replacement component for the
anti-roll bar shackle bushing assembly fitted to applicable Porsche 356 models.
Fits:
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 63
Designed to fit within the shackle bushing, the steel sleeve provides a supporting surface for the mounting hardware, helping maintain correct alignment and secure installation of the anti-roll bar assembly.
What Does It Do?
The steel sleeve supports the anti-roll bar shackle bushing and provides a firm mounting surface for the fastening hardware. It helps prevent excessive compression of the rubber bushing while maintaining correct assembly alignment.
Why Does It Fail?
Common causes include:
- Corrosion and rust
- Wear from suspension movement
- Damage during dismantling
- Deformation from overtightening
- Deterioration of surrounding rubber bushes
When Should It Be Replaced?
Replace if the sleeve is corroded, distorted, cracked or excessively worn.
Inspection is recommended when replacing anti-roll bar shackle bushes or restoring the suspension.
Checks & Installation
Inspect the sleeve, rubber bushing, shackle and mounting hardware for wear or damage.
Ensure the sleeve fits correctly within the bushing and tighten the assembly according to Porsche workshop specifications.
Key Features
- OE Match replacement steel sleeve
- Designed for applicable Porsche 356 anti-roll bar assemblies
- Supports the shackle bushing
- Helps maintain correct mounting alignment
- Suitable for classic Porsche suspension restoration
- Sold individually – 2 required per car
Porsche 356 Anti-Roll Bar Bushes, Sleeves & Suspension Parts
The Porsche 356 anti-roll bar assembly relies on correctly fitted bushes, steel sleeves and mounting hardware to maintain controlled suspension movement.
Replacing worn or corroded shackle bushing sleeves helps restore secure mounting and supports reliable anti-roll bar operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441601
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A/B/C 1.5-1.6 01/1955-12/1965
Diagram ref no 72
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441605
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Sold as a pair
Fits:
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965
Diagram ref no 72
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64441605
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed