do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Porsche
Original Porsche Part Genuine Porsche part 64442312
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Sold as a set of 4
Fits:
Porsche 356 A Models
High Performance Brake line race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. Stainless steel brake lines provide a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPR0701-4P
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
Shop Securely
12 Month Warranty
Worldwide Delivery
Sold as a set of 4
Fits:
Porsche 356 B / 356 C Models
High Performance Brake line race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. Stainless steel brake lines provide a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPR0151-4P
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A/540.1
Porsche 356 B Carrera 2000
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64442313
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A/540.1
Porsche 356 B/C Carrera 2000
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64442314
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Restore reliable hydraulic braking performance with this OE Match Front Brake Hose, featuring a 370mm length and intended for compatible Porsche applications equipped with front drum brakes.
Fits:
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram Ref No 10
The front brake hose is a flexible hydraulic connection within the braking system. It carries pressurised brake fluid between the rigid brake pipework and the moving front brake assembly while accommodating normal steering and suspension movement.
When the brake pedal is pressed, the master cylinder generates hydraulic pressure. This pressure travels through the brake pipes and flexible hoses to operate the wheel brake components. For the system to function correctly, the brake hose must remain securely sealed while resisting expansion under pressure.
Brake hoses deteriorate with age. Repeated flexing, heat, moisture, road contamination and long-term exposure can cause cracking, hardening, swelling or internal deterioration. A hose can also become restricted internally even when its exterior appears relatively serviceable.
Replacing a deteriorated hose with this OE Match 370mm Front Brake Hose helps restore dependable hydraulic pressure transfer and safe operation of the front drum braking system.
What This Product Does:
- Carries pressurised brake fluid to the front brake assembly.
- Provides a flexible connection between rigid hydraulic components.
- Is specified at approximately 370mm in length.
- Is intended for compatible applications with drum brakes.
- Accommodates normal steering movement.
- Accommodates suspension travel.
- Maintains hydraulic pressure during braking.
- Supports correct operation of the front wheel brakes.
- Helps provide consistent brake pedal response.
- Maintains a sealed hydraulic braking circuit.
- Replaces a cracked, leaking, swollen or internally restricted hose.
- Provides an OE Match replacement for compatible Porsche applications.
- Cracks in the hose exterior.
- Perished or deteriorated rubber.
- Hose becoming unusually hard.
- Bulging or swelling.
- Brake fluid leaking from the hose.
- Wetness around the end fittings.
- Corroded hose fittings.
- Damaged threaded connections.
- Abrasion or chafing.
- Exposed hose reinforcement.
- Hose twisted or incorrectly routed.
- Soft or spongy brake pedal.
- Increased brake pedal travel.
- Vehicle pulling during braking.
- Uneven front braking.
- Brake remaining partially applied.
- Wheel brake slow to release.
- Excessive heat from one wheel.
- Brake-fluid level dropping.
- Reduced braking performance.
Why Replacement Matters:
- The flexible brake hose must contain substantial hydraulic pressure whenever the brakes are applied.
- A weakened hose may expand excessively under pressure, reducing the efficiency with which pedal force is transferred to the brakes. More severe deterioration can result in leakage or hose failure.
- Replacing a deteriorated Front Brake Hose helps maintain the integrity of the hydraulic braking system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64442311
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A/540.1 and 356 B/C (1950 to 1965)
Click 'Zoom in' for large parts diagram.
Diagram ref n 9
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64442312
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Brake Line Kit is a complete 8-piece rigid brake pipe set for selected Porsche 356 B T5 1.6 models with a single-circuit braking system.
SET OF 8.
Fits:
- Porsche 356 B T5 1.6 01/59-07/62 (LHD Cars)
Designed for left-hand-drive vehicles, the kit replaces the ageing steel hydraulic brake pipes that carry brake fluid between the master cylinder and the wheel braking components.
The pipes are supplied in a form that requires bending and moulding into the correct vehicle-specific shape during installation. They are therefore intended to follow the original Porsche routing once formed and fitted correctly.
What This Product Does:
The rigid brake lines carry pressurised brake fluid through the vehicle's hydraulic braking system.
When the driver presses the brake pedal, the master cylinder creates hydraulic pressure. The brake lines transfer this pressure to the braking components at the wheels.
Their primary functions are to:
- Carry brake fluid under hydraulic pressure
- Transfer braking force from the master cylinder
- Connect the main sections of the braking system
- Maintain a sealed hydraulic circuit
- Allow the wheel brakes to operate simultaneously
- Preserve reliable brake pedal response
Without sound, leak-free brake lines, hydraulic pressure cannot be transmitted correctly through the system.
Symptoms Of Wear Or Failure:
Possible signs of deteriorating brake lines include:
- Visible surface corrosion
- Heavy rust
- Pitting
- Wet brake pipes
- Brake fluid around unions
- Brake fluid loss
- Soft brake pedal
- Spongy pedal feel
- Pedal gradually sinking
- Increased pedal travel
- Reduced braking performance
- Brake warning symptoms following fluid loss
- Fluid collecting under the vehicle
- Corroded pipe unions
- Crushed or kinked brake pipes
- Damaged protective surfaces
- Pipes rubbing against the body or suspension
Any visible brake-fluid leakage should be treated as a serious braking-system fault.
Why Replacement Matters:
Brake pipes are safety-critical hydraulic components.
Continuing to use heavily corroded or leaking lines can result in:
- Loss of brake fluid
- Reduced hydraulic pressure
- Longer stopping distances
- Poor pedal response
- Sudden brake-line rupture
- Severe loss of braking performance
The risk is especially important on a single-circuit system, where one significant leak can affect the braking system as a whole.
Replacing ageing pipes restores the integrity of the hydraulic circuit and provides a sound foundation for correct brake operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1661501010
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Brake Line Kit is a complete 8-piece rigid hydraulic brake pipe set for selected Porsche 356 B T6 1.6 models with a single-circuit braking system.
SET OF 8.
Fits:
- Porsche 356 B T6 1.6 08/62-12/63 (LHD Cars)
Designed for left-hand-drive vehicles, the kit replaces the ageing rigid brake pipes that carry pressurised brake fluid from the master cylinder through the vehicle to the wheel braking components.
The pipes are supplied requiring final bending and shaping during installation, allowing them to follow the original factory routing once correctly formed.
What This Product Does:The rigid brake pipes form the fixed hydraulic network of the braking system.
When the brake pedal is pressed, the master cylinder generates hydraulic pressure. The brake lines transmit this pressure to the braking components at the wheels.
Their functions include:
- Carrying brake fluid under pressure
- Transferring braking force from the master cylinder
- Connecting the different sections of the hydraulic brake system
- Maintaining a sealed hydraulic circuit
- Supporting consistent brake operation at each wheel
- Providing a rigid connection between flexible brake hose sections and other brake components
Without sound and leak-free brake lines, the hydraulic braking system cannot operate correctly.
Symptoms Of Wear Or Failure:
Signs that rigid brake pipes may require replacement include:
- Visible rust or corrosion
- Deep pitting
- Flaking metal
- Brake fluid around pipework
- Wet unions or connections
- Falling brake-fluid level
- Soft or spongy brake pedal
- Pedal travelling farther than normal
- Pedal slowly sinking under pressure
- Reduced braking performance
- Damaged or crushed pipe sections
- Kinked brake lines
- Corroded union fittings
- Pipes rubbing against the chassis or suspension
- Damaged protective surfaces
- Visible fluid beneath the vehicle
Any hydraulic brake-fluid leak should be treated as a serious fault.
Why Replacement Matters:
Brake pipes are safety-critical components.
Continued use of badly corroded or damaged lines can lead to:
- Sudden pipe rupture
- Brake-fluid loss
- Reduced hydraulic pressure
- Excessive pedal travel
- Increased stopping distance
- Severe loss of braking performance
This risk is especially important on a single-circuit brake system, where one major hydraulic failure can affect the system as a whole.
Replacing deteriorated pipes restores the integrity of the hydraulic circuit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1661501110
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Brake Line Kit is a complete 8-piece rigid hydraulic brake pipe set for selected Porsche 356 C 1.6 models with a single-circuit braking system.
SET OF 8.
- Porsche 356 C 1.6 01/63-12/65 (LHD Cars)
Designed for left-hand-drive vehicles, the kit replaces the ageing steel brake pipes that carry hydraulic brake fluid between the master cylinder and the wheel braking components.
The set also includes two steel caliper bridge pipes, making it a comprehensive replacement package for the rigid brake pipework used on the 356 C braking system. Selected sections incorporate close-fitting vinyl protection to help reduce damage from stones, debris and road contamination.
What This Product Does:
The rigid brake lines carry pressurised brake fluid through the braking system.
When the driver presses the brake pedal:
- The master cylinder creates hydraulic pressure
- Brake fluid is forced through the rigid lines
- Pressure is transmitted to the wheel braking components
- The brakes apply and slow the vehicle
The brake lines therefore form the fixed hydraulic network connecting the master cylinder with the front and rear braking assemblies.
Their primary functions include:
- Carrying brake fluid under pressure
- Transferring hydraulic braking force
- Maintaining a sealed braking circuit
- Connecting the master cylinder to the wheel brakes
- Supporting consistent brake operation
- Providing rigid connections between flexible hose sections and calipers
Symptoms Of Wear Or Failure:
Common signs that rigid brake pipes may require replacement include:
- Surface corrosion
- Heavy rust
- Deep pitting
- Flaking metal
- Brake-fluid leakage
- Wet unions
- Falling fluid level
- Soft brake pedal
- Spongy pedal feel
- Increased pedal travel
- Pedal sinking under pressure
- Reduced braking performance
- Damaged or crushed lines
- Kinked pipework
- Corroded fittings
- Pipes rubbing against the chassis
- Fluid collecting beneath the vehicle
Any visible brake-fluid leak should be treated as a significant braking-system fault.
Why Replacement Matters:
Brake lines are safety-critical components.
Continued use of severely corroded or damaged pipes can result in:
- Brake-fluid loss
- Reduced hydraulic pressure
- Excessive pedal travel
- Longer stopping distances
- Sudden line rupture
- Severe loss of braking performance
The risk is especially important on a single-circuit system, where a major leak can affect the braking system as a whole.
Replacing deteriorated pipes restores the integrity of the hydraulic circuit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1661501210
The product you are viewing cross references to these numbers
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed