do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
Connection piece Genuine Porsche part 91120117102
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.

Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click "Zoom In" for large parts diagram.
Diagram ref no 25.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120114100
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The OE Match fuel tank filter element is intended for Porsche 911 models from 1974 to 1989 and 930 Turbo models from 1975 to 1989. It is a direct service component for the front fuel tank assembly.
Fits
Porsche 911 1974 - 1989
Porsche 911 (930) Turbo 1975 - 1989
Diagram ref no 25
What This Product Does
This filter element screens debris and contamination within the fuel tank before fuel circulates through the delivery system. Maintaining an unrestricted supply helps protect the fuel pump and downstream injection or carburettor components.
Functions
- Filters particles from fuel leaving the tank
- Helps protect the fuel pump from contamination
- Supports consistent fuel flow through the delivery system
- Forms part of the front fuel tank assembly
Technical Details
- Part number: 91120114100
- Component type: fuel tank filter element
- Installation location: front fuel tank assembly
Symptoms of Fault
- Hesitation or reduced power under load
- Long cranking or difficult starting
- Restricted fuel flow
- Fuel pump operating more noisily than usual
- Repeated contamination found elsewhere in the fuel system
- Visible debris or deterioration identified during tank servicing
Why Replacement Matters
An obstructed filter can restrict the supply of fuel and place additional demand on the pump. Replacement may be appropriate during scheduled fuel-system maintenance, tank refurbishment or diagnosis of contamination and flow problems. Inspect associated connections and sealing components during installation.
FAQs
- Is this the engine-bay fuel filter?
No. This part is the filter element associated with the front fuel tank assembly. - When should it be inspected?
Inspection is advisable when servicing the tank, investigating restricted fuel flow or dealing with contamination after prolonged storage. - Can a blocked element affect the fuel pump?
Restricted flow can make the pump work harder and may contribute to noisy operation or fuel-delivery problems. - Does it fit every classic 911?
No. Confirm part number 91120114100 against the vehicle model, production year and fuel-system arrangement before installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120114100
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

Fits:
Porsche 911 (1974-1983)
Porsche 930 Turbo (1975-1977)
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120117102
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)

Fits:
Porsche 911 (1974-1983)
Porsche 930 Turbo (1975-1977)
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120117102
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)

Fits:
Porsche 911 2.0-3.3 08/69-07/89
Click 'Zoom In' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120114300
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

Fits:
Porsche 911 2.0-3.3 08/69-07/89
Click 'Zoom In' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91120114300
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fuel pump and fuel sender kit for Porsche 911 3.2L models from 1984–1989, covering both early 915 and later G50 Carrera variants, combines key fuel delivery and level-sensing components in one package.
What This Product Does
This kit brings together a replacement fuel pump and sender unit to deliver fuel from the tank at the correct pressure while providing a matching level signal to the gauge. It is intended to support reliable running, consistent fuel supply, and accurate tank level indication on 3.2 Carrera models.
Functions
- Draws fuel from the tank and feeds it towards the engine
- Helps maintain appropriate fuel pressure within the system envelope
- Measures fuel level within the tank for the dashboard gauge
- Supports smooth starting and running by stabilising fuel delivery
- Assists in preventing fuel starvation when the tank level is low
Symptoms of Fault
- Long cranking, intermittent no-start or cutting out under load
- Hesitation, surging or loss of power at higher revs
- Whining or humming noises from the pump area
- Fuel gauge reading erratically, stuck full/empty or inconsistent with actual level
- Hot-start issues or stalling at junctions
Why Replacement Matters
Age, fuel contamination and electrical wear can cause a pump to become noisy or weak, and sender units can suffer from worn tracks or sticking floats. Replacing tired components helps restore stable fuel flow and more predictable gauge readings, which is particularly relevant on older 911 3.2 models where many original parts are still in service. Addressing pump and sender issues together can reduce repeat visits into the tank area and supports methodical maintenance on classic 911s.
Fits
- Porsche 911 1984–1986 3.2L
- Porsche 911 1987–1989 3.2L G50
FAQs
- Q: Can a weak fuel pump still allow the car to run?
A: Yes, a tired pump may run the engine at light load but struggle to maintain pressure during hard acceleration or higher revs, showing up as hesitation or cutting out. - Q: Do fuel pump problems always trigger obvious noise?
A: Not always, but increasing whining or humming from the tank area is a common early sign, especially if performance has started to deteriorate. - Q: Could a relay or wiring fault mimic pump failure?
A: Yes, low voltage, poor earths or a failing relay can cause similar no-start or intermittent running symptoms, so basic electrical checks are sensible before condemning the pump. - Q: Why does low fuel level sometimes make symptoms worse?
A: With little fuel in the tank, the pump can run hotter and may ingest more debris or air, which makes any underlying weakness more noticeable. - Q: Should the fuel filter be checked when replacing a pump?
A: It is common practice to inspect or renew the fuel filter at the same time, as restriction can overload a new pump and affect pressure.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94460810204
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fuel pump and fuel sender kit for Porsche 911 3.0L SC 1978-83 / 3.3L Turbo (930) , combines key fuel delivery and level-sensing components in one package.
What This Product Does
This kit brings together a replacement fuel pump and sender unit to deliver fuel from the tank at the correct pressure while providing a matching level signal to the gauge. It is intended to support reliable running, consistent fuel supply, and accurate tank level indication on Porsche 911 3.0L SC 1978-83 / 3.3L Turbo (930)
Functions
- Draws fuel from the tank and feeds it towards the engine
- Helps maintain appropriate fuel pressure within the system envelope
- Measures fuel level within the tank for the dashboard gauge
- Supports smooth starting and running by stabilising fuel delivery
- Assists in preventing fuel starvation when the tank level is low
Symptoms of Fault
- Long cranking, intermittent no-start or cutting out under load
- Hesitation, surging or loss of power at higher revs
- Whining or humming noises from the pump area
- Fuel gauge reading erratically, stuck full/empty or inconsistent with actual level
- Hot-start issues or stalling at junctions
Why Replacement Matters
Age, fuel contamination and electrical wear can cause a pump to become noisy or weak, and sender units can suffer from worn tracks or sticking floats. Replacing tired components helps restore stable fuel flow and more predictable gauge readings, which is particularly relevant on older Porsche 911 3.0L SC 1978-83 / 3.3L Turbo (930) where many original parts are still in service. Addressing pump and sender issues together can reduce repeat visits into the tank area and supports methodical maintenance on classic 911s.
Fits
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
FAQs
- Q: Can a weak fuel pump still allow the car to run?
A: Yes, a tired pump may run the engine at light load but struggle to maintain pressure during hard acceleration or higher revs, showing up as hesitation or cutting out. - Q: Do fuel pump problems always trigger obvious noise?
A: Not always, but increasing whining or humming from the tank area is a common early sign, especially if performance has started to deteriorate. - Q: Could a relay or wiring fault mimic pump failure?
A: Yes, low voltage, poor earths or a failing relay can cause similar no-start or intermittent running symptoms, so basic electrical checks are sensible before condemning the pump. - Q: Why does low fuel level sometimes make symptoms worse?
A: With little fuel in the tank, the pump can run hotter and may ingest more debris or air, which makes any underlying weakness more noticeable. - Q: Should the fuel filter be checked when replacing a pump?
A: It is common practice to inspect or renew the fuel filter at the same time, as restriction can overload a new pump and affect pressure.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160810203
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
Fuel pump and fuel sender kit for Porsche 1974-1977 2.7L / 1976-77 3.0 Carrera / 930 1975-1977 3.0L Turbo, combines key fuel delivery and level-sensing components in one package.
What This Product Does
This kit brings together a replacement fuel pump and sender unit to deliver fuel from the tank at the correct pressure while providing a matching level signal to the gauge. It is intended to support reliable running, consistent fuel supply, and accurate tank level indication on Porsche 1974-1977 2.7L / 1976-77 3.0 Carrera / 930 1975-1977 3.0L Turbo
Functions
- Draws fuel from the tank and feeds it towards the engine
- Helps maintain appropriate fuel pressure within the system envelope
- Measures fuel level within the tank for the dashboard gauge
- Supports smooth starting and running by stabilising fuel delivery
- Assists in preventing fuel starvation when the tank level is low
Symptoms of Fault
- Long cranking, intermittent no-start or cutting out under load
- Hesitation, surging or loss of power at higher revs
- Whining or humming noises from the pump area
- Fuel gauge reading erratically, stuck full/empty or inconsistent with actual level
- Hot-start issues or stalling at junctions
Why Replacement Matters
Age, fuel contamination and electrical wear can cause a pump to become noisy or weak, and sender units can suffer from worn tracks or sticking floats. Replacing tired components helps restore stable fuel flow and more predictable gauge readings, which is particularly relevant on older Porsche 1974-1977 2.7L / 1976-77 3.0 Carrera / 930 1975-1977 3.0L Turbo where many original parts are still in service. Addressing pump and sender issues together can reduce repeat visits into the tank area and supports methodical maintenance on classic 911s.
Fits
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 930 1975-1977 3.0L Turbo
FAQs
- Q: Can a weak fuel pump still allow the car to run?
A: Yes, a tired pump may run the engine at light load but struggle to maintain pressure during hard acceleration or higher revs, showing up as hesitation or cutting out. - Q: Do fuel pump problems always trigger obvious noise?
A: Not always, but increasing whining or humming from the tank area is a common early sign, especially if performance has started to deteriorate. - Q: Could a relay or wiring fault mimic pump failure?
A: Yes, low voltage, poor earths or a failing relay can cause similar no-start or intermittent running symptoms, so basic electrical checks are sensible before condemning the pump. - Q: Why does low fuel level sometimes make symptoms worse?
A: With little fuel in the tank, the pump can run hotter and may ingest more debris or air, which makes any underlying weakness more noticeable. - Q: Should the fuel filter be checked when replacing a pump?
A: It is common practice to inspect or renew the fuel filter at the same time, as restriction can overload a new pump and affect pressure.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160810204
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)