Please wait…

Please wait while we process your order,
do not press the back button…

boot Genuine Porsche part 91442459200

Code: 91442459200

Genuine Porsche part

boot

The product code 91442459200 was also found on these diagrams

701-010 - sleeve

Hand Lever System, Pedal Cluster 914 (1970-1976)

Handbrake / Manual throttle / Heating / Actuator 914 1970-76

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

3 3 3

Gearshift rod cover. Porsche 914

PCG42450100/1

Product Information

Gearshift Rod Cover.
Protect the gearshift linkage and help maintain precise gear selection with this OE Match Gearshift Rod Cover, manufactured as a direct replacement. Produced to OE-style specifications, this protective cover is designed to shield the gearshift rod and linkage from dirt, moisture, and road debris, helping to extend the service life of the gear change mechanism.

Fits:

Porsche 914 (1970-1976)

Diagram Ref No 47

Over time, the original cover can become brittle, split, torn, or detached due to age, heat, road contamination, and continual movement. Once damaged, the gear linkage is exposed to moisture and debris, which can accelerate wear and reduce the precision of the gearshift. Replacing a worn or damaged gearshift rod cover restores essential protection for the linkage assembly, making this OE Match component ideal for maintenance, gearbox repairs, and Porsche restoration projects.

What This Product Does:

Protects the gearshift rod and linkage from dirt and moisture.
Helps prevent premature wear of the gear change mechanism.
Shields the linkage from road debris and contaminants.
Supports smooth and precise gear selection.
Restores the original protection of the transmission linkage.
Replaces split, worn, or deteriorated original covers.
Provides an OE-style fit and dependable quality.

Symptoms Of Wear Or Failure:

Split, cracked, or torn gearshift rod cover.
Brittle or hardened rubber material.
Missing or detached protective cover.
Dirt, moisture, or debris around the gear linkage.
Premature wear or corrosion of linkage components.
Increased stiffness or reduced precision during gear changes.
Visible deterioration caused by age or road exposure.

Why Replacement Matters:

The gearshift rod cover is a simple but essential protective component that helps keep contaminants away from the gear linkage. When the cover becomes damaged or deteriorates, dirt and moisture can reach moving components, accelerating wear and potentially affecting the smoothness and accuracy of gear selection.
Replacing the gearshift rod cover helps preserve the condition of the gear linkage, supports consistent shifting performance, and protects the transmission linkage from unnecessary wear. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match gearshift rod cover provides the correct fit, dependable quality, and long-lasting durability, making it an excellent choice for Porsche maintenance, gearbox repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG42450100

PCG42450100

847603070296

91442450100

The product you are viewing cross references to these numbers

Gear shift selector cover kit. Porsche 914 1970-72

914424501K

Product Information

Gear Shift Selector Cover Kit

Restore the smooth operation and protection of your Porsche 914's gear change mechanism with this OE Match Gear Shift Selector Cover Kit.

Fits:

Porsche 914 (1970-1976)

Diagram ref no 47, 48 and 49

The gear shift selector cover is an important component of the gear linkage assembly, helping to protect the selector mechanism from dirt, dust, road debris and moisture while ensuring the moving components remain correctly supported. A damaged or missing cover can allow contaminants to enter the selector housing, accelerating wear and leading to stiff, imprecise or inconsistent gear changes.

Over decades of use, the original cover can become brittle, crack or deteriorate due to heat, oil contamination and exposure to the elements. During gearbox servicing or gear linkage refurbishment, replacing worn selector covers helps maintain the integrity of the shifting mechanism and contributes to the precise gear change for which the Porsche 914 is renowned.

Manufactured to OE Match standards, this kit provides excellent fitment and durability, making it ideal for routine maintenance, gearbox repairs or concours-quality restorations.

Key Features

Suitable for Porsche 914 models (1970-1972)
Protects the gear shift selector mechanism from dirt and moisture
Helps maintain smooth and precise gear selection
Manufactured for accurate fit and long service life
Ideal for gearbox servicing and gear linkage restoration
Perfect for original restorations and preventative maintenance

Porsche 914 Gear Shift Linkage & Transmission Components

The Porsche 914's mid-engine layout relies on a long gear linkage system that must operate smoothly and accurately to provide precise gear selection. Every component within the linkage plays an important role, including the selector cover, which helps protect the mechanism from contamination and unnecessary wear.

Replacing ageing gear linkage components during restoration or transmission servicing helps restore the crisp, positive gear changes originally engineered into the Porsche 914.

Why Replace the Gear Shift Selector Cover?

Over time, the original selector cover can become worn or damaged, reducing its ability to protect the gear selector assembly. Replacing it helps:

Prevent dirt and moisture entering the selector mechanism
Reduce premature wear of moving linkage components
Improve long-term gearbox reliability
Maintain smooth and consistent gear selection
Restore the original appearance of the transmission assembly

As many Porsche 914s are now over 50 years old, replacing worn linkage components is an important part of any comprehensive restoration or maintenance programme.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

914424501K

PCG42450100

91442450200

91442429700

91442429702

914424501K

847603079909

The product you are viewing cross references to these numbers

Shift cover retainer strap. Porsche 914 70-72

91442450200/1

Product Information

Shift Cover Retainer Strap

Restore the integrity of your Porsche 914 gear linkage with this OE Match Shift Cover Retainer Strap.

Fits:

Porsche 914 (1970-1972)

Diagram ref no 48

The shift cover retainer strap is a small but essential component of the gear selector assembly. Its purpose is to securely hold the shift selector cover in place, ensuring the gear linkage remains protected from dirt, water, road debris and other contaminants that can accelerate wear and affect gear selection.

A correctly fitted retainer strap helps keep the selector cover firmly seated, allowing the gear linkage to operate smoothly while protecting the internal mechanism from unnecessary exposure. Although simple in design, it plays an important role in preserving the reliability and precision of the Porsche 914's gear change system.

Manufactured to OE Match standards, this replacement retainer strap offers excellent fitment and durability, making it ideal for routine maintenance, transmission repairs or concours-quality restorations.

Why Do Shift Cover Retainer Straps Fail?

The original retainer straps are continually exposed to vibration, moisture, road salt, engine heat and decades of repeated use. Over time, corrosion can weaken the rubber, while constant tension and movement may cause the strap to fatigue, bend or break.

A damaged or missing retainer strap allows the selector cover to loosen or become displaced, exposing the gear selector mechanism to dirt and moisture. This contamination can lead to increased wear within the linkage, resulting in stiff, imprecise or inconsistent gear changes. During any gearbox or linkage overhaul, replacing worn retaining hardware is a simple and inexpensive way to help maintain long-term reliability.

Key Features

Secures the gear selector cover correctly
Protects the gear linkage from dirt and moisture
Helps maintain smooth and accurate gear selection
Manufactured for precise fit and long service life
Ideal for gearbox servicing and restoration projects

Porsche 914 Gear Linkage & Transmission Components

The Porsche 914's distinctive mid-engine layout relies on a long and precisely engineered gear linkage system to deliver positive gear changes. Every component within the selector assembly contributes to the overall feel and accuracy of the gearshift, including the shift cover retainer strap.

Although often overlooked during restoration, replacing worn or corroded retaining hardware helps ensure the selector cover remains securely in place, protecting the linkage from contamination and reducing unnecessary wear.

Benefits of Replacing the Shift Cover Retainer Strap