Oxygen sensor. This part number supersedes to 95860617201 Genuine Porsche part 95860617200

Oil level sender in sump pan.
Fits:
Porsche 955 Cayenne 3.2ltr V6 - 2004 to 2006
Porsche 955 Cayenne S / turbo - 2003 to 2006
Porsche 957 Cayenne 3.6ltr V6 - 2008 to 2010
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860616030

The product you are viewing cross references to these numbers

Pressure sensor.
Fits:
Porsche 958 Cayenne MKIII 3.0L Diesel 2011>> (I7MG/7MQ)
Porsche 970 Panamera 3.0L Diesel 2012>> (I165)
*I7MG/7MQ - Emission concept EU 5
*I165 - Emission concept EU 5
Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860615110

The product you are viewing cross references to these numbers

Knock Sensor.
Fits:
Porsche 958 Cayenne 3.0L Hybrid 2011>>2018
Porsche 970 Panamera 3.0L Hybrid 2010>>2016
Diagram Ref No 39

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958606121

The product you are viewing cross references to these numbers

Lambda oxygen sensor
Fits:
Porsche 958 Cayenne 8cyl. 4.8L 2011-17 (AFTER catalytic converter)
Porsche 958 Cayenne Turbo 8cyl. 4.8L 2011-17 (AFTER catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860617201

The product you are viewing cross references to these numbers

Oil level sender in sump pan (with gasket/seal)
 
Fits:
Porsche 958 Cayenne 3.6L V6 Petrol
Porsche 958 Cayenne 4.2L V8 Diesel
Porsche 958 Cayenne 4.8L V8 S / GTS / TURBO
Porsche 981 Boxster
Porsche 981C Cayman
Porsche 981SP Boxster Spyder
Porsche 981 Cayman GT4
Porsche 991 Gen 1
Porsche 991 Gen 2
Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860616011

The product you are viewing cross references to these numbers

Boost Pressure Sensor.
Maintain accurate turbocharger control and optimum engine performance with this OE Match Boost Pressure Sensor. Produced to OE-style specifications, this precision-engineered sensor provides reliable intake pressure monitoring for the engine management system, ensuring efficient turbocharger operation, accurate fuel delivery, and optimum combustion performance. Manufactured from high-quality electronic components and durable materials, it is designed to deliver dependable performance and long service life under demanding engine bay conditions.
Fits:

• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16 

 
Diagram Ref No 22
The boost pressure sensor continuously monitors the pressure within the intake manifold or charge air system and transmits this information to the engine control unit (ECU). The ECU uses these readings to regulate turbocharger boost pressure, fuel injection timing, and the air-fuel mixture, helping to maximise engine performance, improve fuel economy, and reduce exhaust emissions. Designed as a direct OE-style replacement, this sensor provides accurate readings and dependable operation for routine servicing, repairs, and restoration projects. 
What This Product Does:

• Monitors intake manifold and turbocharger boost pressure.
• Sends accurate pressure data to the engine control unit.
• Supports precise turbocharger boost regulation.
• Optimises fuel injection and air-fuel mixture.
• Improves engine performance, fuel efficiency, and emissions.
• Replaces faulty or inaccurate boost pressure sensors.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Engine management warning light illuminated.
• Reduced engine performance or acceleration.
• Turbocharger underboost or overboost conditions.
• Poor throttle response.Increased fuel consumption.
• Vehicle entering limp-home mode.
• Diagnostic fault codes relating to boost pressure or intake pressure.
• Irregular turbocharger operation.

Why Replacement Matters:

• The boost pressure sensor is a vital component of the engine management system, supplying the ECU with accurate intake pressure data required to regulate turbocharger boost and optimise engine operation. A faulty sensor can result in incorrect boost regulation, poor engine performance, increased fuel consumption, elevated exhaust emissions, and reduced-power or limp-home mode. Continued operation with an inaccurate sensor can also place unnecessary stress on the turbocharger and related engine components.
• Replacing a worn or faulty sensor with this OE Match Boost Pressure Sensor restores accurate pressure monitoring, improves turbocharger performance, enhances engine efficiency, and supports dependable long-term operation. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Boost Pressure Sensor provides reliable fit, performance, and durability for Porsche maintenance, repairs, and engine management servicing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860618010

The product you are viewing cross references to these numbers

Pressure sensor.
Fits:
Porsche 958 Cayenne 3.0L Diesel 2015-18
(MCV.VA / MCV.VB / MCV.VC)
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB906051B

The product you are viewing cross references to these numbers

Lambda oxygen sensor. Fits right or left side.
Fits:
Porsche 958 Cayenne S 4.2L DIESEL 2011-18 (in front of catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB998262

The product you are viewing cross references to these numbers

Lambda oxygen sensor. Fits Left or Right side.
Fits:
Porsche 958 Cayenne S 4.2L DIESEL 2011-18 (in front of catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB998262

The product you are viewing cross references to these numbers