do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Original Porsche Part Genuine Porsche part 99111341104
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Performance headers improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.
FEATURES:
• Fits: all Porsche 991 Carrera vehicles 2012+
• Improves power by 23 whp and 22 ft-lbs. of torque at 5000rpm
• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance
• Investment-cast F1/ALMS/NASCAR high-velocity 3-into-1 merge collectors for maximum performance
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct replacement for the restrictive OEM headers.
• Gaskets included for a leak proof seal
• Fabspeed Lifetime Limited Warranty.
NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California. Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991SHDR
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Free-flowing headers without catalytic converters; designed for maximum power and exhaust flow for race and track applications.
FEATURES:
• Fits: all Porsche 991 Carrera vehicles 2012+
• Adds 27 whp and 26 ft-lbs of torque at 6500rpm
• Saves 4 lbs from the rear of the vehicle
• Recommended for track/off-road use only
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Gaskets are included for a leak proof seal
• Direct replacement for the restrictive OEM headers with no cutting or welding required
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Please note: By fitting these race headers the emission light will come on your dash and you will require the oxygen sensor extension tubes or your car to be remapped for the emission light to come off
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991RHDR
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
DesignTek Exhaust manifold / header with 200 Cell Euro 4 coating substrate.
Price is for PAIR.
Fits:
Porsche 991.1 Carrera / S
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606109915
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
DesignTek Exhaust manifold / header with catalyst bypass.
Price is for PAIR.
Fits:
Porsche 991.1 Carrera / S
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606109918
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
DesignTek Exhaust manifold / header with catalyst bypass.
Price is for PAIR.
Fits:
Porsche 991.1 Carrera 3.4L 2012-2015
Porsche 991.1 Carrera S 3.8L 2012-2015
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606109919
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
- Fabspeed Sport Headers
- 200-cell HJS Sport Catalytic Converters
- Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991VPKGP
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Fabspeed RACE Standard Exhaust Performance Package, WITH Performance Software, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991RVPKGPE
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Fabspeed STREET Sport Exhaust Performance Package PSE, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
Fabspeed Sport Headers
200-cell HJS Sport Catalytic Converters
- Valvetronic Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991VPKGPSEP
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Fabspeed RACE Sport Exhaust Performance Package PSE, WITH Performance Software, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
- Fabspeed Race Headers with catalytic-converter bypass
- Valvetronic Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
- XperTune Performance Software required by Fabspeed for this configuration
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991RVPKGPSEPE
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed