Please wait…

Please wait while we process your order,
do not press the back button…

Original Porsche Part Genuine Porsche part 99970308340

Code: 99970308340

Genuine Porsche part

Original Porsche Part

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

3 3 3

Door Round Rubber Plug, 20mm. Porsche 911 65-89

99970304050/1

Product Information

Door Round Rubber Plug, 20mm.
The OE Match Door Round Rubber Plug, 20mm is a premium-quality replacement body sealing component designed to close and protect factory access holes within the door assembly on compatible Porsche models. Manufactured to OE specifications for fit, flexibility and durability, this precision-moulded rubber plug provides a secure weatherproof seal that helps prevent the ingress of water, dirt, dust and road debris while maintaining the original appearance and integrity of the door.

Fits:

Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)

Diagram Ref No 25

Manufactured from high-quality automotive-grade EPDM rubber, the plug is engineered to resist moisture, UV exposure, ozone, temperature extremes and continual vibration without hardening, shrinking or cracking. Precision-moulded to fit 20mm diameter apertures, it provides direct OE-style installation, making it ideal for replacing missing, damaged or deteriorated body plugs during restoration, accident repair or routine maintenance.

What This Product Does:

Seals 20mm factory access holes within the door assembly.
Prevents the ingress of water, dust and road debris.
Helps protect the inside of the door from corrosion.
Reduces the risk of moisture entering the door cavity.
Maintains the original appearance of the bodywork.
Provides a secure, vibration-resistant fit.
Restores factory sealing performance.
Forms an essential part of the vehicle's body sealing system.

Symptoms Of Wear Or Failure:

Missing rubber plug.
Cracked, hardened or split rubber.
Loose-fitting or partially dislodged plug.
Water entering the door cavity.
Increased dirt or debris inside the door.
Corrosion developing around exposed access holes.
Wind noise caused by unsealed openings.
Moisture-related damage within the door.
Visible deterioration due to age or UV exposure.
Untidy appearance of the door assembly.

Why Replacement Matters:

Door sealing plugs are continually exposed to water, road salt, dirt, vibration and changing temperatures. Over time, the rubber can harden, shrink or crack, reducing its ability to provide an effective seal. Missing or damaged plugs leave factory access holes exposed, allowing contaminants and moisture to enter the door cavity.
Water ingress can accelerate internal corrosion, damage door components and contribute to rattles, unwanted noise and premature deterioration of electrical and mechanical parts inside the door. Replacing damaged or missing plugs is a simple yet effective way to protect the vehicle's body structure and preserve its long-term condition.
Replacing the original component with the OE Match Door Round Rubber Plug restores the integrity of the door sealing system. Manufactured to OE standards using premium automotive-grade EPDM rubber, it provides factory-style fitment, excellent weather resistance and long-lasting durability, helping protect your Porsche against corrosion while maintaining its original finish and build quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970304050

99970304050

The product you are viewing cross references to these numbers

Rubber stop for front / rear lid. Porsche 911 / 928 / 944 /968 / 996 / 997

99970314040/1

Product Information

Rubber Stop For Rear Lid.

The OE Match Rubber Stop for Rear Lid is a replacement rubber buffer designed to support and cushion the rear lid when closed.

Fits:

Porsche Boxster 986 2.5L 1997-99
Porsche Boxster 986 2.7L 1999-02
Porsche Boxster S 986 3.2L 1999-02
Porsche Boxster 986 2.7L 2003-04
Porsche Boxster S 986 3.2L 2003-04
Porsche Boxster 987 2.7L 2005-08/08
Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Porsche 996 C2 3.6L 09/01-2005
Porsche 996 C4 3.6L 09/01-2005
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Porsche 996 GT3 RS 2003-04
Porsche 997 MK1 Carrera 2 3.6L 2005-08
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4 3.6L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 / GT3 RS 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII Carrera C2 3.6L 2009-12
Porsche 997 MKII Carrera C4 3.6L 2009-12
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 / GT3 RS 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Porsche Cayman 2.7L 987C 2006-08
Porsche Cayman S 3.4L 987C 2005-08
Porsche Cayman 2.9L 987C MKII 2009-12
Porsche Cayman S / R 3.4L 987C MKII 2009-12
Porsche 944 2.5L 8V 1982-87
Porsche 944 2.7L 8V 1988-89
Porsche 944S 2.5L 16V 1987-88
Porsche 944S2 3.0L 16V 1989-91
Porsche 944 Turbo 2.5L 8V 1985-88
Porsche 944 Turbo 2.5L 8V 1989-91
Porsche 944 Turbo S 2.5L 8V 1988
Porsche 968 3.0L 1992-94
Porsche 968 Sport 3.0L 1994-95
Porsche 968 CS 3.0L 1993-95
Porsche 968 Turbo S 3.0L 1993-94
Porsche 928 4.5L 1978-82
Porsche 928S 4.7L 1981-83
Porsche 928S2 4.7L 1984-86
Porsche 928S4 5.0L 1987-92
Porsche 928GT 5.0L 1989-91
Porsche 928GTS 5.4L 1992-95

Diagram Ref No 39

Mounted at the rear lid or body contact point, the rubber stop helps prevent direct metal-to-metal contact while supporting correct lid positioning. It also helps absorb vibration and minor movement when driving, reducing rattles and protecting surrounding bodywork and latch components from unnecessary impact.

As rubber components age, they can harden, crack, flatten or disappear altogether. Replacing a deteriorated rear lid stop is a simple but important way to restore correct closure, reduce unwanted noise and maintain proper panel positioning.

What This Product Does:
The rear lid rubber stop acts as a small cushioning and support point between the lid and surrounding body structure.

When the lid is closed, the stop compresses slightly to support the panel and absorb movement. This helps keep the lid stable while preventing hard contact between painted or metal components.

Its main functions include:

Cushioning the rear lid when it closes
Preventing direct metal-to-metal contact
Helping support correct rear lid positioning
Reducing movement and vibration while driving
Helping prevent rattles and knocking noises
Protecting surrounding paintwork and body panels
Reducing unnecessary load and movement at the latch
Helping maintain consistent panel gaps
Providing a more solid and refined closing action

Although it is a small component, the rubber stop contributes to both correct panel fit and everyday refinement.

Symptoms Of Wear Or Failure:
Rubber stops deteriorate naturally through age, heat, compression and exposure to moisture and environmental contaminants.

Common symptoms of a worn or failed rear lid rubber stop include:

Rubber becoming hard or brittle
Cracks or splits in the stop
Stop becoming flattened or permanently compressed
Pieces of rubber breaking away
Stop missing completely
Rear lid rattling over uneven roads
Knocking or tapping noises from the rear lid
Excessive movement when the lid is closed
Lid sitting slightly too low or unevenly
Poor or inconsistent panel gaps
Rear lid requiring adjustment to close correctly
Paint marks or contact points where the lid touches surrounding bodywork
Increased strain or movement at the latch
A harsher closing action than normal

Similar symptoms can also result from incorrect latch adjustment, worn hinges or other missing buffers, so the complete rear lid mounting and closure system should be inspected where necessary.

Why Replacement Matters:

A rear lid should remain securely supported when closed. If the rubber stop becomes compressed, hardened or missing, the panel can move more than intended.
This movement can create rattles and knocking noises and may allow the lid to contact surrounding bodywork. Over time, repeated contact can damage paintwork and create unnecessary wear around the lid, latch and mounting points.
A deteriorated stop can also affect how the rear lid sits when closed, potentially resulting in uneven panel gaps or poor alignment.
Replacing worn rubber stops helps restore the correct cushioning effect and supports the lid in its intended position. This can improve closure quality, reduce unwanted vibration and protect valuable surrounding bodywork.
For older Porsche models, replacing aged rubber buffers is also worthwhile during restoration, as decades-old rubber may appear intact while having become significantly hardened or compressed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970314040

99970314040

99970314041

311823499A

99970303650

The product you are viewing cross references to these numbers

3 3 3

Intake manifold rubber sleeve. Porsche 911 / 914

99970307650/1

Product Information

Intake manifold rubber sleeve
This OE Match intake manifold rubber sleeve is a replacement rubber connecting sleeve for Porsche 911 and 914 models. It is designed to match the original-style fitment and function, helping provide a secure air intake connection within the engine induction system.

Fits:
Porsche 911 1965 - 1973
Porsche 914/6 1970 - 1972

Diagram ref no 6/1

The intake manifold rubber sleeve helps connect and seal sections of the intake manifold or induction system. A good sleeve helps maintain correct airflow, prevents unwanted air leaks, and supports smooth engine running, correct mixture control, and reliable intake system performance.

Functions
• Replaces the intake manifold rubber sleeve
• Helps seal the intake manifold connection
• Supports correct airflow through the induction system
• Helps prevent vacuum leaks and unmetered air entry
• Supports smooth idle and consistent engine performance
• Replaces cracked, hardened, split, loose, or perished original sleeves
• OE Match replacement for classic Porsche intake system repair.

Why Replace This Part?
Rubber intake sleeves are exposed to heat, fuel vapour, oil mist, vibration, and age-related deterioration. Over time, the rubber can harden, crack, split, shrink, or lose its sealing ability. A failing sleeve may cause vacuum leaks, rough idle, poor running, hesitation, difficult starting, or incorrect fuel mixture. Replacing the sleeve helps restore a secure intake seal and dependable engine performance.

When to Replace This Part
• The rubber sleeve is cracked, split, hard, loose, or perished
• Vacuum leaks are suspected around the intake manifold
• The engine has rough idle, hesitation, or poor running
• Intake manifold parts have been removed or serviced
• Fuel injection or carburettor components are being inspected
• The intake system is being rebuilt or restored
• Preventative replacement is being carried out during engine service.

Where it fits on the car
This sleeve fits within the engine intake manifold / induction system on Porsche 911 and 914 models. It is used at the intake connection point where a rubber sleeve seal is specified.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970307650

99970307650

The product you are viewing cross references to these numbers

3 3 3

Plastic plug for rear bumper guard. Porsche 911/912 1965-73

99970304340/1

Product Information

Plastic plug for Rear bumper guard
This OE Match plastic plug is a replacement finishing plug used on the rear bumper guard of early classic Porsche 911 and 912 models. It is designed to match the original-style fit and appearance, helping restore the correct factory look to the rear bumper assembly.
Plastic plug diameter: 12 mm
Sold each.

Fits:
Porsche 911/912 1965 - 1973 All Types

Diagram ref no 23

The plastic plug fits into the rear bumper guard to cover the designated opening or fixing point. It helps protect the bumper guard from dirt and moisture entry while also providing a neat, finished appearance.

Functions
•  Covers the opening or fixing point in the rear bumper guard
•  Helps restore the original appearance of the rear bumper assembly
•  Protects the bumper guard area from dirt, moisture, and debris
•  Provides a clean OE-style finishing detail
•  Replaces missing, damaged, cracked, or faded original plugs
•  Suitable for classic Porsche bodywork restoration
•  OE Match replacement for correct fit and presentation

Why Replace This Part?
Original bumper guard plugs can become brittle, cracked, faded, loose, or lost over time. Missing or damaged plugs can leave the bumper guard looking unfinished and may allow dirt or moisture into the mounting area. Replacing the plug is a simple way to improve the appearance and detail accuracy of a classic Porsche restoration.

When to replace
•   The original plastic plug is missing
•   The plug is cracked, faded, brittle, or damaged
•   The rear bumper guard has been removed or restored
•   The bumper assembly is being refinished or repainted
•   The plug no longer fits securely
•   The car is being restored to an OE-style appearance
•   The rear bumper guard looks incomplete without the finishing plug

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970304340

99970304340

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Original Porsche Part Genuine Porsche part 99970308340