Classic Seats

Seat adaptor, Left & Right
Seat adaptor set designed for Porsche 911 models built from approximately August 1973 to October 1984, allowing the installation of compatible classic and sports seats. The adaptors are designed for vehicles with an original slider spacing of 405mm and use 6mm fixing bolts. Supplied as a complete left and right pair, with one adaptor for each front seat.

Fits:
Porsche 911
Year: Approx. 08/1973 to 10/1984

Set Includes:
  1 x Left seat adaptor
  1 x Right seat adaptor

Suitable Seats: Nürburgring / Nürburgring (R) / LeMans / Monza / Spider / Rally ST / Modell14

Important: When fitting the smaller Nürburgring seats, Adaptor 760/1 for 200mm mounting points must also be ordered.

Please note that seat sliders and adaptors are normally both required unless otherwise stated.

If you are unsure which seat adaptor is correct for your Porsche, please contact the DESIGN911 team and we will be happy to assist with compatibility. 

  Seat Rails / Sliders Set, Left & Right

Seat rail set designed for the installation of compatible sports and classic seats, providing the sliding mechanism required to adjust the seat position.

The rails are supplied as a complete set for both front seats, with components for the left and right seat.

Product Details:

    •   Product: Seat Rails / Sliders
    •   Set: Left + Right
    •   Quantity: Complete set for both front seats
    •   Application: Seat installation and adjustment
    •   Suitable for compatible seat installations

These seat rails are intended to be used with the appropriate seat and vehicle-specific seat adaptor where required.

You will receive a set for both the left and right seat.

If you are unsure which seat rails or adaptors are required for your vehicle and seat combination, please contact the DESIGN911 team and we will be happy to assist with fitment and compatibility.

Spider Bucket Seats, Black Leather or Leatherette, SET OF 2

Spider Bucket Seats, Black Leather or Leatherette, SET OF 2 by OE Match for Porsche 356, 911 and 912 models from 1950 to 1994. These classic-style replacement seats are available with black leather or leatherette upholstery and include one seat for each side of the vehicle.

Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965  
Porsche 911 1965 – 1989
Porsche 964 1989 –  1993

What This Product Does

Designed to replace worn, damaged or unsuitable original seating, these bucket seats combine a period-influenced appearance with shaped support for the driver and passenger. Folding backrests and reclining mechanisms provide practical adjustment while retaining styling suited to classic Porsche interiors.

Functions

• Provides replacement seating for the driver and passenger
• Supports a classic or restored interior appearance
• Offers shaped side support and a defined seating position
• Allows backrest angle adjustment through reclining fittings
• Uses folding backrests to assist access behind the front seats

Technical Details

• Supplied as a set of two seats
• Includes left-hand and right-hand seats
• Choice of black leather or black leatherette upholstery
• Folding backrest with reclining seat fittings
• Seat rails and vehicle-specific adaptors are not included and must be selected separately
• Installation must be checked against the vehicle floor, mounting points and required seating position

Symptoms of Fault

• Torn, cracked or heavily worn upholstery
• Collapsed internal padding or reduced seating support
• Loose frames, rocking seats or movement at the runners
• Damaged or difficult-to-operate recline mechanisms
• Seat backs that no longer fold or lock correctly
• Squeaks, rattles or excessive movement while driving

Why Replacement Matters

Replacing deteriorated seats can restore the cabin presentation, seating comfort and correct operation of the backrest mechanisms. It also provides a practical solution where original frames or upholstery are beyond economical restoration. Correct rails, adaptors and mounting hardware are essential, as seat installation affects driving position and occupant security.

FAQs

• Are both front seats included?
  Yes. The set contains one left-hand seat and one right-hand seat.
• What upholstery options are available?
  The seats are offered in black leather or black leatherette.
• Do the backrests adjust?
  Yes. Each seat has a folding backrest with reclining fittings.
• Are seat rails supplied?
  No. Appropriate rails and vehicle-specific adaptors must be ordered separately.
• Will these seats attach directly to the original mounting points?
  The required installation arrangement depends on the vehicle and fitted rails. Confirm the mounting points, adaptors and seating position before installation.

Sport-Stradale Bucket Seats, Black Leatherette / Basket Weave, SET OF 2
Sport-Stradale B52 bucket seats by OE Match for Porsche 356, 911 and 912, 964 models from 1950–94. This set comprises two high-back seats trimmed in black leatherette with basket-weave centre panels, combining a 1970s-influenced appearance with the support required for sporty road and circuit use.

Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965  
Porsche 911 1965 – 1989
Porsche 964 1989 –  1993

What This Product Does

The shaped seat base and substantial side bolsters help hold the driver and passenger in position through corners. A low mounting profile provides useful headroom for taller occupants, while adjustable backrests and a folding function make the seats practical for classic Porsche road interiors.

Functions

• Supports the occupant using a contoured base and pronounced side bolsters
• Provides a low seating position within the cabin
• Accommodates 4-, 5- and 6-point belt arrangements through integrated slots
• Allows backrest angle adjustment through a rotary-wheel mechanism
• Folds forward to help provide access behind the front seats
• Replaces deteriorated seating with a period-inspired sports-seat design

Technical Details

• Model: Sport-Stradale
• Quantity: two seats in left- and right-hand configurations
• Trim: black leatherette with black basket-weave centre panels
• Construction: coated tubular steel frame with fire-resistant foam padding
• Design: high backrest with head restraint and multi-point harness openings
• Seat rails, vehicle-specific adaptors and mounting fittings are not included and must be selected separately

Symptoms of Fault

• Upholstery with splits, fading, loose stitching or worn surfaces
• Compressed padding that has lost its shape or support
• Movement caused by loose frames, runners or mounting points
• Reclining or folding mechanisms that stick or fail to hold position
• Noise from worn seat rails, brackets or fixings
• Corrosion or damage affecting the frame and attachment hardware

Why Replacement Matters

Replacing badly worn seats can restore consistent occupant support, reliable adjustment and the presentation of a classic Porsche cabin. These Sport-Stradale seats also suit period-style interior conversions where a high-back sports-seat profile is preferred. Correct rails, adaptors and fasteners should be used for the specific vehicle, and all mounting points should be checked before installation.

FAQs

• Does the set include two seats?
  Yes. It contains left- and right-hand seat configurations.
• Are multi-point harnesses compatible?
  The seat design includes openings for 4-, 5- and 6-point belt configurations. The complete restraint system must be suitable for the vehicle and its intended use.
• Are runners and mounting adaptors supplied?
  No. Appropriate seat rails, vehicle-specific adaptors and mounting hardware must be obtained separately.
• Can the original seats be stored for later refitting?
  Yes. Retaining the original seats, rails and fixings can allow the previous interior specification to be reinstated.
• Should the mountings be inspected during installation?
  Yes. Check the floor mounting points, rails, brackets and fasteners for wear, damage or corrosion before fitting the replacement seats.

Sport-Stradale bucket seats by OE Match for Porsche 356, 911 and 912, 964 models from 1950–94. Supplied as a pair for the left- and right-hand sides, these high-back seats combine black leatherette with corduroy centre panels and a shape influenced by sports and rally seating from the 1970s.

Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965  
Porsche 911 1965 – 1989
Porsche 964 1989 –  1993

What This Product Does

The contoured seat base and pronounced side bolsters support the occupant during cornering while retaining a period-inspired appearance suitable for classic interiors. A low seating position provides additional space for taller drivers, while the folding, adjustable backrests help accommodate practical road use.

Functions

• Provides lateral support through shaped side bolsters
• Offers a low seating position within the vehicle
• Accepts 4-, 5- and 6-point belt configurations through integrated slots
• Allows backrest adjustment using a rotary-wheel mechanism
• Folds forward to assist access behind the front seats
• Refreshes worn seating while retaining a classic sports-seat appearance
  
  

Technical Details

• Model: Sport-Stradale
• Upholstery: black leatherette with black corduroy centre sections
• Quantity: two seats, comprising left- and right-hand configurations
• Construction: coated steel tube frame with fire-resistant foam padding
• High backrest with head restraints and multi-point harness slots
  
  

Suitable seat rails, vehicle-specific adapters and mounting fittings are not included and must be selected separately for the intended vehicle.

Symptoms of Fault

• Split seams, torn upholstery or faded material
• Collapsed padding that no longer provides consistent support
• Loose frames, rocking runners or excessive seat movement
• Sticking or damaged reclining mechanisms
• Squeaks and rattles from worn rails or mountings
• Corroded, loose or unsuitable attachment hardware
  
  

Why Replacement Matters

Renewing heavily worn seats can improve support, adjustment and cabin presentation while complementing a restoration or period-style interior conversion. Installation should use the correct rails, adapters and fixings for the specific Porsche, with the mounting points inspected before fitting.

FAQs

• Are two seats included? Yes. The set contains left- and right-hand seats.
• Can multi-point harnesses be used? The seats incorporate slots for 4-, 5- and 6-point belt arrangements. Confirm the complete restraint installation is appropriate for the vehicle and intended use.
• Are the seat rails supplied? No. Suitable rails, adapters and mounting hardware must be chosen separately.
• Can the original seats be retained? Keeping the original seats and fittings may allow the vehicle to be returned to its previous interior specification.

Sport-Stradale Bucket Seats, Black Leatherette / Houndstooth, SET OF 2
Sport-Stradale bucket seats supplied as a pair for selected Porsche 356, 911 and 912, 964 models. Finished in black leatherette with Houndstooth centre panels, their high-back shape and period-influenced appearance suit classic interior restorations and sporting road-car builds.

Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965  
Porsche 911 1965 – 1989
Porsche 964 1989 –  1993

What This Product Does

Based on sports-seat designs associated with the 1970s, the Sport-Stradale combines a low seating position with shaped side support. Slots in the seat base accommodate suitable 4-, 5- or 6-point harness arrangements, while the high backrest supports a purposeful classic cabin layout.

Functions

• Provides shaped lateral support for the driver and passenger.
• Offers a low seating position suitable for taller occupants.
• Accepts suitable 4-, 5- and 6-point harness configurations through the seat-base slots.
• Provides matching seating for both sides of the vehicle.
• Complements period-style Porsche interiors with Houndstooth centre panels.
  
  

Technical Details

• Model: Sport-Stradale
• Contents: two high-back Sport-Stradale bucket seats
• Upholstery: black leatherette with Houndstooth centre sections
• Seat construction: steel-tube frames with cataphoretic corrosion-protection coating
• Manufacturer-specified padding uses heavy-duty, fire-resistant foam.
  
  

Symptoms of Fault

• Split, faded or heavily worn upholstery.
• Collapsed padding that no longer supports the occupant evenly.
• Movement caused by worn seat runners, bushes or mounting hardware.
• Loose frames, unwanted squeaks or an unstable seating position.
• Damaged adjustment mechanisms or runners that no longer slide correctly.
  
  

Why Replacement Matters

Replacing heavily worn seats can restore a secure seating position, consistent support and a tidy period-style interior. Inspect the existing mounting points, runners, brackets and fixings during installation, replacing worn supporting components where necessary. Vehicle-specific adaptors and seat rails may be required and should be selected for the exact model and production year.

FAQs

• Are these seats supplied individually? No. This product contains a matching set of two seats.
• Are seat rails and adaptors required? The appropriate vehicle-specific brackets, adaptors and adjustable rails may be needed. Confirm the mounting arrangement before installation.
• Can harness belts be used? The seat bases have slots intended for suitable 4-, 5- and 6-point harness layouts. Harness specification, routing and anchorage must be checked separately.
• Will they fit every 356, 911, 912 or 964 without modification? Mounting requirements can vary by chassis and year. Verify the listed application and required installation hardware for the individual vehicle.

Tilting Seat Base S-Seat With Sliders, Left And Right (PAIR)

The OE Match Tilting Seat Base S-Seat with Sliders, Left and Right (Pair) is a premium-quality replacement seat mounting assembly designed to restore the correct seating position, adjustability and functionality of compatible classic Porsche models fitted with S-style seats. Manufactured to OE specifications for fit, strength and durability, this complete pair of tilting seat bases includes integrated seat sliders, allowing smooth fore and aft adjustment while retaining the original seat tilt function for improved access and everyday usability.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

Manufactured from high-strength pressed and welded steel with precision-machined sliding mechanisms, the seat bases are engineered to withstand continual occupant loads, repeated adjustment and long-term use. The durable corrosion-resistant finish provides excellent protection against wear and environmental conditions, while the OE-style mounting points ensure direct installation with compatible S-seats. Supplied as a complete left and right pair, these seat bases are ideal for restorations, seat replacements and interior refurbishment projects.

What This Product Does:

• Securely mounts the front seats to the vehicle floor.
• Allows smooth fore and aft seat adjustment.
• Retains the original tilting seat function for improved rear access.
• Maintains the correct seating position and driving ergonomics.
• Provides stable and secure seat support during driving.
• Restores factory seat adjustment and operation.
• Includes left and right seat bases with integrated sliders.
• Forms an essential part of the vehicle's seating system.

Symptoms Of Wear Or Failure:

• Seat movement during braking or cornering.
• Difficulty sliding the seat forwards or backwards.
• Tilting mechanism failing to operate correctly.
• Excessive play in the seat mounting.
• Stiff or seized seat runners.
• Worn or damaged locking mechanism.
• Corrosion affecting the seat frame or sliders.
• Uneven seat positioning.
• Rattling noises from beneath the seat.
• MOT or vehicle inspection concerns relating to insecure seat mountings.

Why Replacement Matters:

• The seat base and slider assembly is subjected to constant occupant weight, repeated adjustment and continual vibration throughout the vehicle's life. Over time, the sliding rails, locking mechanism and pivot points can wear or become corroded, reducing seat stability and making adjustment difficult.
• A worn seat base can compromise driving comfort, reduce occupant safety and prevent the seat from locking securely into position. Excessive movement or damaged runners may also accelerate wear on surrounding components and detract from the originality of a restored classic Porsche.
• Replacing worn or damaged seat bases with the OE Match Tilting Seat Base S-Seat with Sliders restores smooth seat adjustment, secure mounting and the original tilting functionality. Manufactured to OE standards from premium-quality materials, this complete left and right pair provides factory-style fitment, exceptional durability and dependable long-term performance, making it the ideal solution for Porsche restoration, repair and interior refurbishment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152106768

The product you are viewing cross references to these numbers

Tilting seat base with sliders for ST / R / RR / RS seat .

Fits:
Porsche 911 1974-89

Please Note: This is a special order item and it could take anything between 3-4 weeks to receive the stock in.