Spring Plate

Adjustable rear spring plate.
2 Required per car. Price is EACH



Fits:
Porsche 911 1965 to 1986

Replace the rusty, worn, rear spring plates with this new, adjustable item.
Spring plates and bushes are designed for standard road use

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

Adjustable spring plate, Rear.



Fits:
Porsche 911 1974-86
Price is per item. req 2 per Car.
Replacement for Diagram Ref No.16

Unfortunately, lowering the rear of your 911/912/930 is not nearly as easy as lowering the front. That is until you install this new Adjustable Spring Plate kit Now your rear ride height can be adjusted to your desired level with a simple turn of a bolt.
Note: When using adjustable spring plates with stock torsion bars, the splines may be a tight fit and require a small amount of hand fitting.

Spring plate normally rust, replacing them will give you a better ride.

Bolts set for swords rear axle.



Fits:
Porsche 911 (73-89)
Porsche 924S
Porsche 944
Porsche 968

12-piece bolt set for the rear axle of various Porsche models.

The original screws are often rusted tight and wrench flats rarely survive disassembly without damage. Here you get a new set of screws.

Can be used on both sides (Left and Right).

Reference numbers:
91133330301, 91133330501, 91133330501, 90036000701,

Rear spring plate hexagon-head bolt. M 16 x 1,5
Price is each.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Racing version silent blocs for spring plate
Sold in sets of (4), enough for both sides of one car.



Fits:
Porsche 911/912/930 ALL 1965-89

Gain back ride quality and rear end stability with High Density Rear Spring Plate Bushings for your 911. Under prolonged use, especially when driven hard, the OEM bushings can break down allowing more slop in the rear suspension. If neglected long enough or driven under heavy load enough, these bushings will eventually deform allowing the spring plate to contact the cover plate. Replacing your factory bushings with our 25% stiffer units will allow full and smooth articulation of the spring plate, thus improving the ride quality and performance of the legendary rear end in your classic 911. Featuring a higher, "sport" durometer these rubber mounts are a great compromise between soft factory mounts and solid/spherical bearings often used to replace them.

QuickChange™ Spring Plate Kit.
Sold per kit, 1 kit req'd per car.



Fits:
Porsche 911/912/930 1965-1986

Available In Three Configurations
• For '65-'68 911/912, Short Wheel Base
• For '69-'86 911/912, '75-'86 930, Long Wheel Base
• For '69-'86 911/912, '75-'86 930, Splined Hub Kit


Change Torsion Bars and Adjust Ride Height

QuickChange spring plates make fast-work of torsion bar re-indexing and replacement. Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.

• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings

Setup is fast and easy

If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange. Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.

QuickChange Torsion Bar Changeout

QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.

Can be used with any torsion bar and bushing that fits factory spring plates – not included – however QuickChange Torsion bars and PolyBronze Bearings are required to use torsion bar extraction features.

Kits for '69-'86 long wheel base cars include a screw type height adjuster. Kits for '65-'68 short wheel base cars use an eccentric bolt height adjuster for improved tire clearance.

To add QuickChange functionality to your existing set of '77-'86 factory adjustable spring plates or ASP, you can order the Splined Hub separately.

Splined Hub Kits

The Splined Hub Kit includes the small plate and adjuster hardware to mate with the large plate from your donor set of factory adjustable spring plates, or the ASP. Order one kit per car.

Rear axle cross tube.



Fits:
Porsche 911 Carrera 72-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Rear Axle Cross Tube.


Fits:
Porsche 911 Turbo 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Bushings set with instructions: w/ 55-60 shore A
hardness. Includes: 4x Stock rubber rear spring plate bushings.



Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm

Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79

Bushings set with instructions: w/ 80-85 shore A hardness. Includes: 4x Heavy duty rubber rear spring plate bushings.



Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm

Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79

Rear CamberMax Kit. Rear camber adjuster.
Sold per kit, 1 kit req'd per car.



Fits:
Porsche 911/912/930 1965-89
AL trailing arms only

Rear CamberMax kit simplifies 911 rear camber adjustment, making it easy to achieve aggressive negative camber settings of 3+ degrees. Instead of using the troublesome factory eccentric bolt, Rear CamberMax allows adjustment with a simple and precise screw.

Unlike the stock eccentric adjuster, Rear CamberMax allows adjustment with vehicle weight resting on the tires making it easy to read a camber gauge while turning the adjuster.

By making equal adjuster turns on both driver and passenger sides, quick changes can be made trackside even if a camber gauge is not available – try that with the factory eccentric adjuster!

Note – Fits factory spring plates and AL trailing arms only. Does not fit Sway-a-way plates or steel trailing arms.

Rear spring plate eccentric bolt. M 16 x 1,5



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Rear spring plate eccentric bolt. M 16 x 1,5
Price is each.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Rear spring plate hexagon-head bolt. M 16 x 1,5
Price is each.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Rear spring plate rubber bush.



Fits:
Porsche 911 1965-67

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 26

Rear spring plate rubber bush. OUTER



Fits:
Porsche 911 1965-67

Click 'Zoom in' for large parts diagram.
Diagram ref no. 26

Rear trailing arm to spring plate eccentric bolt.



Fits:
Porsche 911/912 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Rear trailing arm to spring plate eccentric bolt.
Price is each.



Fits:
Porsche 911/912 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Rear trailing arm to spring plate eccentric bolt.
Price is each.



Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Rear trailing arm to spring plate eccentric bolt.
Price is each.



Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Rear trailing arm to spring plate eccentric bolt.
M 12 x 1,5. Price is each.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Rear trailing arm to spring plate eccentric bolt.
M 12 x 1,5.
Price is each.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Rear Trailing Arm to Spring Plate Hexagon Nut. M12x1,5



Fits:
Porsche 356 B / 356 C
Porsche 911 1965-83
Porsche 911 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 28.

RSR 935 Rear Spring Plate Set For Porsche 911 / 930 Turbo

Fits:
Porsche 911 1966-89 with rear coil overs
Porsche 930 Turbo
Porsche 912's with rear coil overs

Features & Quality
Our coilover-only spring plate system has the added features and thoughtful engineering you expect from Elephant Racing.
Rubber Seals

Rubber seals keep water and contaminate out of the oversized precision rod ends. Seals are critical to extend rod end life for both racers and street cars. Racers have the occasional "agricultural excursion", covering the suspension with grit and dirt that accelerates wear of unsealed rod ends. Street cars have occasional exposure to water when washing or in rain. Rubber seals are key to long life.
Build Quality

Skillful TIG welding and machined radius on the plate. Hard anodize burgundy aluminum parts are tough, attractive and look good on most any color car. Top quality materials throughout.

Hardened alloy steel blades and aircraft grade aluminum to handle even high HP turbos.

Precision, Oversize rod end – For long trouble-free performance.
Ease of adjustment

Drilled hole positively defines plate length ensuring proper thread engagement at double adjuster and rod end, preventing accidental over-extension possible with double-slotted designs.
Two Height Settings

Choose stock height or 1 inch raise for anti-squat geometry (requires matching raise of trailing ar

Spacer ring for rear axle.



Fits:
Porsche 911 2.0-3.0 01/63-07/77
Porsche 912 1.6 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram Ref No 32

Spacer ring for rear axle.



Fits:
Porsche 911 2.0-3.0 01/63-07/77
Porsche 912 1.6 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram Ref No 32

Sports adjustable rear spring plate.
2 Required per car. Price is EACH



Fits:
Porsche 911 1965 to 1986

Sport bushings – 30% harder rubber

Replace the rusty, worn, rear spring plates with this new, adjustable item.
Spring plates and bushes are designed for performance road and track use.

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

Sports quick adjust rear spring plate set.
SET OF 2 Left & Right



Fits:
Porsche 911 1969 to 1986
Porsche 911 turbo 1975 to 1988

Replace the rusty, worn, rear spring plates with this new item.
Spring plates and bushes are motorsport designed for quick adjustment.

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

Sports quick adjust rear spring plate set.
SET OF 2 Left & Right



Fits:
Porsche 911 1987 to 1989 with G50 Gearbox
Porsche 911 turbo 1989 with G50 Gearbox

Replace the rusty, worn, rear spring plates with this new item.
Spring plates and bushes are designed for quick adjustment.

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

Spring plate covers normally rust, replacing them will give you a better ride.



Fits:
Porsche 911 1965-89
Porsche 930 1975-77

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29

Spring plate covers normally rust, replacing them will give you a better ride.



Fits:
Porsche 911 1965-89
Porsche 930 1975-77

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29

SuperPro Replacement Spring Plate Bush Competition use recommended
Replacement for Porsche parts No. 91133300900
SET OF 4



Fits:
Porsche 911 1974-89

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Click 'Zoom in' for large parts diagram.
Fits to No. 16 on the diagram.

Powerflex PFR57-411 Replacement Spring Plate Bush.
SET OF 4



Fits:
Porsche 911 1965-67

Fits to No. 16 on the diagram.

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Replacement Spring Plate Bush.
SET OF 4



Fits:
Porsche 911 1965-67

Fits to No. 16 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.

Replacement Spring Plate Bush.
SET OF 4



Fits:
Porsche 911 1965-67

Fits to No. 16 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Powerflex Spring Plate Bush.
Fits to spring plate OEM part number 90133300309
/ 90133300301.

SET OF 4



Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)

Fits to No. 16 on the diagram.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Powerflex Black Series Spring Plate Bush.
Fits to spring plate OEM part number 90133300309
/ 90133300301.

SET OF 4



Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)

Fits to No. 16 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.

Powerflex Heritage Collection Spring Plate Bush.
Fits to spring plate OEM part number 90133300309
/ 90133300301.

SET OF 4



Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)

Fits to No. 16 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

SuperPro Replacement Spring Plate Bush.
Replacement for Porsche parts No. 91133300900
SET OF 4



Fits:
Porsche 911 1965-89

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Click 'Zoom in' for large parts diagram.
Fits to No. 16 on the diagram.

Rear spring plate bushing set provides a semi-solid and super low friction design intended for both street cars and fully dedicated track machines.
The maintenance free, replaceable bushing inserts are guaranteed to last as long as you own your car. Inner and outer bushing housings as well as stainless steel races are precision CNC machined. Zero deflection at suspension pivot points will provide both street and race cars with optimal geometry. Stainless steel inner races combined with the super low friction coefficient of the bushing sleeves allows the spring and shock to function properly without having resistance from the old rubber bushings or undersized polyurethane types.

This performance upgrade produces a more
tunable, predictable, and comfortable rear suspension. Made in the USA.

• Super low coefficients of dynamic friction.
• Utilizes modern technology, Thermoplastic PTFE (Teflon) impregnated self lubricating thermoplastic
polymer bushing liners.
• Electro-polished stainless steel inner races.
• Billet 6061 T6 CNC machined front and rear bushing housings.
• Replaces factory stamped steel outer housings and all rubber bushings.
• Precision shim pack is included for ease of installation and optimal alignment.
• Installation instructions included.
• Provides absolute minimal deflection of rear spring plate pivot points.
• Guaranteed to last as long as you own your car!
• Sold in complete sets of 4 bushings (completes one car).
• Spring plates are not included.

Fits:
Porsche 911 1965-89
Porsche 930 Turbo

Replacement for Diagram Ref No.16