Centre & Middle Console parts

Aluminium emergency/ hand brake & heater control block-off plate.

Fits:
Porsche 911/912/930 1965-89

Rennline's emergency brake & heater control block-off plate will dress up the interior of your dedicated track 911 that has the emergency brake and heater controls removed from the center tunnel between the seats. This aluminium block-off plate comes pre-drilled and with stainless steel mounting hardware for a quick and easy installation.

Note: Pictures may not show actual product.

Bulb 12V / 1.2W

Instrument panel bulb, designed for use in dashboard dials and gauge clusters, providing clear, even illumination for speedometers, tachometers, and other vehicle instruments.

It delivers consistent light output to ensure dashboard markings remain easy to read in low-light and night-time driving conditions. Built for reliability and long service life, this bulb is a direct replacement for original instrument lighting bulbs and installs easily without modification.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90063113290

The product you are viewing cross references to these numbers

Centre console cover

Fits:
Porsche 911 1974-89
Porsche 911 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155223100

The product you are viewing cross references to these numbers

Centre tunnel shift linkage inspection cover for heating/ventilation. 

Fits:
Porsche 911 - 1965 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150473131

The product you are viewing cross references to these numbers

Centre tunnel shift linkage inspection cover.

Fits:
Porsche 911 1965-89

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150473130

The product you are viewing cross references to these numbers

Centre tunnel shift linkage inspection cover.
This centre tunnel shift linkage inspection cover is an OE Match interior tunnel access panel that fits over the shift linkage/coupler inspection opening in the centre tunnel. It restores the correct cover fitment and helps keep the tunnel area protected and tidy.

Fits:
Porsche 911 1965 - 1989

Diagram ref no 17

This OE Match inspection cover is manufactured to replicate the original Porsche part in size, shape, and fit. It sits in the centre tunnel and provides access to the shift linkage/coupler area when servicing or adjusting the gear linkage.

Over time, the original cover can become cracked, warped, missing, or damaged during previous repairs. Replacing it helps restore the correct finish to the tunnel opening and prevents dirt and debris entering the linkage area. It’s a direct-fit replacement suitable for maintenance, restoration work, or interior refresh projects.

It closes off the shift linkage inspection opening in the centre tunnel, while allowing quick access for inspection and adjustment when needed.

Function:
•  Covers the shift linkage/coupler access opening in the centre tunnel
•  Helps reduce ingress of dust and debris into the linkage area
•  Restores a neat, correct finish to the interior tunnel access point
•  For straightforward installation

A damaged or missing cover leaves the tunnel opening exposed, which can allow dirt into the linkage area and looks untidy in the cabin. Replacing it restores proper coverage and makes future linkage inspection/adjustment easier and cleaner.

When to replace:
•  Cover is cracked, warped, or broken
•  Missing after previous linkage work
•  Loose fit or poor sealing around the tunnel opening
•  During interior restoration or tunnel refresh
•  When servicing the shift linkage/coupler and the original cover is damaged

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150473130

The product you are viewing cross references to these numbers

Control unit housing without electronics with buttons.

Suitable for Porsche: CDR-21, CDR-210, CR-210, CR-11, Cr-21, CR-31

and for Becker: Avus, Monza, Grand Prix and Mexico

Becker number: 1251.546

Without electronics

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33228

The product you are viewing cross references to these numbers

Hazard warning light switch

Fits:
Porsche 911 1970-89
Porsche 911 (930) Turbo 1975-89

This product supersedes Porsche's old part numbers:
91161312300, 91161312431, 91161312430, 91161312432,

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161312435

The product you are viewing cross references to these numbers

Manual throttle valve lever
OE Match manual throttle valve lever for Porsche 911 models from 1970 to 1977 and Porsche 911 (930) Turbo models from 1975 to 1977. This replacement lever forms part of the manual throttle control linkage and helps transmit driver input through the throttle operating mechanism.

Suitable for replacing a worn, damaged or missing original lever where part number 90142431700 or 90142431701 is specified.

Fits:
Porsche 911 1970 - 1977
Porsche 911 (930) Turbo 1975 - 1977

Diagram ref no 20

The manual throttle valve lever is a mechanical linkage component used within the throttle control system. It forms part of the mechanism that transfers movement through the throttle linkage, helping operate the throttle correctly in response to driver input.

It is suitable for classic Porsche restoration, throttle linkage repair or replacement of a worn original component.

What this part does

• Forms part of the manual throttle linkage system
• Transfers movement through the throttle operating mechanism
• Helps provide correct mechanical throttle operation
• Supports smooth and consistent throttle response
• Replaces worn, damaged or missing original linkage components
• Suitable for classic Porsche restoration and repair

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142431700

The product you are viewing cross references to these numbers

Manual throttle valve lever
The Genuine Porsche Manual Throttle Valve Lever (Part Numbers: 90142431700 / 90142431701) is an original equipment throttle control component designed for classic Porsche 911 models. This connecting lever forms part of the manual hand throttle mechanism, allowing the driver to adjust the engine's idle speed using the hand throttle control located beside the handbrake. The lever connects the manual throttle control to the accelerator linkage, helping maintain an increased idle speed when required, particularly during cold engine starts and warm-up.

Fits:
Porsche 911 1970 - 1977
Porsche 911 (930) Turbo 1975 - 1977

Diagram ref no 20

Manufactured to Porsche's original specifications, this genuine replacement component provides precise fitment, reliable operation and factory-correct functionality, making it ideal for classic Porsche maintenance and restoration.

What Does This Part Do? – Functions

• Manual Throttle Control: Transfers movement from the hand throttle lever to the accelerator linkage.
• Idle Speed Adjustment: Allows the driver to manually increase engine idle speed.
• Cold Start Assistance: Helps maintain a higher idle during engine warm-up.
• Throttle Linkage Support: Ensures correct operation of the manual throttle mechanism.
• Original Fitment: Maintains factory-correct throttle control functionality.

Why Replace This Part?
Over time, the manual throttle valve lever can become worn, cracked or damaged due to ageing and repeated operation. A faulty lever may prevent the hand throttle from operating correctly, making it difficult to maintain an increased idle speed during cold starts.

Replacing a worn or broken lever with a genuine Porsche component helps restore proper manual throttle operation and preserve the original functionality of the classic Porsche throttle control system.

When to Replace This Part?

• Broken Lever: Cracked, snapped or damaged component.
• Throttle Malfunction: Hand throttle no longer increases engine idle speed.
• Excessive Play: Loose or worn connection within the throttle linkage.
• Cold Start Issues: Difficulty maintaining increased idle due to a faulty hand throttle mechanism.
• Restoration Work: During classic Porsche interior or throttle linkage restoration.

Where Does It Fit on the Car?
Location: Interior – centre tunnel, beside the handbrake lever.

The manual throttle valve lever is installed within the hand throttle control mechanism, positioned near the handbrake assembly between the front seats. It connects the driver's hand throttle control to the throttle linkage, allowing manual adjustment of the engine's idle speed.

Parts Diagram Reference: No. 20 (1970–1973 911 diagram).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142431701

The product you are viewing cross references to these numbers

Rennline aluminium heater control knob

Fits:
Porsche 911/912/930 1972-89

Rennline's billet aluminium heater control knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory heater control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply tap off your old knob, and tap ours on, installation is literally a snap.

Rennline Aluminum Shift Linkage Cover.

Fits:
Porsche 911/912/930 1965-89

The Rennline shift coupler cover is an attractive replacement for the stock cover. The Rennline cover is made of perforated 1/8" aluminium and comes with stainless steel hardware. This is the perfect item to jazz up the stripped-out interior of your track 911 or give that street 911 a race car look.

Note: Pictures may not show actual product.

Rennline aluminium throttle control knob.

Fits:
Porsche 911/912/930 1972-89

Rennline's billet aluminium throttle control knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory throttle control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply tap off your old knob, and tap ours on, installation is literally a snap.

Rennline billet aluminium HVAC control knob.

Fits:
Porsche 911/912/930 1972-89
Porsche 914 all

Rennline's billet aluminium heater control knobs are the perfect inexpensive interior upgrade for any 911/914. Factory heater control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red or black anodized finishes for a durable, long lasting appearance. Simply pull off your old knob, and tap ours on, installation is literally a snap.

Note: HVAC Controls not included.

Rennline Teardrop defrost knob.
Available in red, black and silver.

Compatible with 911/912/930 ('65-'89) or any car with a threaded lever.

Rennline's billet aluminium teardrop defrost knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply unscrew your old knob, and screw our on.

Throttle Control Lever Knob.
Restore the correct appearance and convenient operation of the throttle control mechanism with this OE Match Throttle Control Lever Knob. Designed for compatible Porsche applications, this replacement knob fits to the throttle control lever and provides the driver with a comfortable, secure contact point for operating the control.

Fits:

• Porsche 911 1972-75 USA Spec cars

Diagram Ref No 26/1

Although small, the throttle control lever knob is an important finishing component. It allows the lever to be operated without gripping the bare metal mechanism and contributes to the original appearance and functionality of the vehicle's interior controls.  

What This Product Does:

• Fits to the vehicle's throttle control lever.
• Provides a comfortable surface for operating the lever.
• Improves grip compared with using an exposed lever.
• Helps provide smooth and convenient manual operation of the control.
• Protects the end of the operating lever.
• Helps maintain the correct appearance of the interior controls.
• Replaces a cracked, worn, loose, damaged, or missing knob.
• Provides an OE-style solution for compatible Porsche applications.
• Is suitable for maintenance and restoration projects where original-style presentation is important.

Symptoms Of Wear Or Failure:

• The throttle control lever knob is missing.
• Cracks or splits in the existing knob.
• The knob has become loose on the lever.
• Excessive movement when operating the control.
• The knob repeatedly pulls off during use.
• Significant surface wear or deterioration.
• Fading or discolouration affecting the interior appearance.
• Chipped, broken, or damaged edges.
• Difficulty gripping or comfortably operating the lever.
• The original knob has become brittle due to age.
• Damage discovered during interior restoration or control-system servicing.

Why Replacement Matters:

• A damaged or missing throttle control lever knob may not prevent the underlying mechanism from functioning, but it can make the control less comfortable and less convenient to operate. Using the exposed lever can also make precise operation more difficult and detract from the finished appearance of the interior.
• Age-related deterioration is particularly relevant on classic vehicles. Plastics and similar materials can become brittle after decades of exposure to temperature changes, sunlight, and repeated handling. Once cracking begins, the knob may loosen or eventually break away completely.
• For restored or well-maintained classic Porsche interiors, small details such as control knobs also contribute significantly to an authentic and complete appearance. Replacing a missing or visibly damaged knob provides a simple way to improve both usability and presentation.
• Replacing a worn or missing component with this OE Match Throttle Control Lever Knob helps restore comfortable control operation and an original-style interior finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142479200

The product you are viewing cross references to these numbers