Porsche > 911 & 912 (1965-1989) > 911 1978-1983 3.0L / SC > Exhausts >

Heat Exchangers

Exhaust & Heat Exchangers SSI Package Porsche 911 1974-83

Code: EXHAUSTKIT56

Exhaust & Heat Exchangers SSI Package Porsche 911 1974-83 WITH 2 IN , 2 OUT EXHAUST

Replace the rusty, steel heat exchangers and exhaust with this high quality exhaust and stainless steel SSi heat exchanger package.
Made using AISI 321/EN4531 titanium stabilized stainless steel, the heat exchangers offer long life, increased power output and a quality fit.

Heat Exchangers & Twin Outlet Rear Silencer/Muffler 70mm Tail Pipe 92.511SD

Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark. you should also purchase EXHAUSTKIT09

Fits:
Porsche 911 1974-83 2.7ltr / 3.0ltr

Kit Includes:
- 1 x twin outlet rear silencer (Dansk)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.

For more information about this product Click Here

About this kit

Zoom in (1)

Exhaust kit for Porsche 911 2.7-3.0L Rear box 1IN - 1OUT, Outer diameter 60mm.

Code: EXHAUSTKIT1041

Exhaust kit, Stainless steel, 1 IN - 1OUT, Outer diameter 60mm.

dansk

Fits:
Porsche 911 2.7-3.0L 08/73-10/83

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT1041

1620000910

92.287SD

1623103500

1620400400

1620401000

1620200600

1620604400

1621701910

1621701510

1621401970

1621101200

1625000300

1625001100

91.101S

92.102S

92.103S

92.300S

92.502SD

PCG91121100

91.101KIT

93011115900

91111119101

90007428202

90091009702

1620606400

92.502S

The product you are viewing cross references to these numbers

About this kit

Zoom in (1)

Exhaust kit for Porsche 911 2.7-3.0L Rear box 1IN - 1OUT, Outer diameter 84mm.

Code: EXHAUSTKIT1040

Exhaust kit, Stainless steel, 1 IN - 1OUT, Outer diameter 84mm.

dansk

1620000910

92.287SD

1623103500

1620400400

1620401000

1620200600

1620604400

1621701910

1621701510

1621401970

1621101200

1625000300

1625001100

91.101S

92.102S

92.103S

92.300S

92.502SD

PCG91121100

91.101KIT

93011115900

91111119101

90007428202

90091009702

1620606400

92.502S

The product you are viewing cross references to these numbers

About this kit

Zoom in (1)

Exhaust kit for Porsche 911 2.7-3.0L Rear box 1IN - 2OUT, Outer diameter 84mm.

Code: EXHAUSTKIT1030

Exhaust kit, Stainless steel, 1 IN - 2OUT, Outer diameter 84mm.

dansk

1620000910

92.287SD

1623103500

1620400400

1620401000

1620200600

1620604400

1621701910

1621701510

1621401970

1621101200

1625000300

1625001100

91.101S

92.102S

92.103S

92.300S

92.502SD

PCG91121100

91.101KIT

93011115900

91111119101

90007428202

90091009702

The product you are viewing cross references to these numbers

About this kit

Zoom in (3) Zoom in (3) Zoom in (3)

Heat exchanger fitting kit. Porsche 911 65-83

Code: MANIFOLDKIT911E

Exhaust heat exchanger fitting kit. Includes studs and nuts made out of titanium.

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system.

rohler

Fits:
Porsche 911 1965-83

About this kit

Zoom in (1)

Racing exhaust set with "Big Bore" heat exchanger. Porsche 911 1963-83

Code: 1620801910

Racing exhaust set including "Big Bore" heat exchanger with Ø41 mm tubes. For 2.7ltr / 3.0ltr models also add oil tubes and remove lower rear panel.

Improve exhaust gas flow using these "big bore" SSi heat exchangers and Racing exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

Fits:
Porsche 911 2.7ltr -3.0ltr 08/1973-10/1983
Porsche 911 S (mech. injection) 2.4ltr 08/1971-07/1973
Porsche 911 T/E/S (not mech. injection) 2.0ltr -2.4ltr 01/1963-12/1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620801910

1620801910

The product you are viewing cross references to these numbers

About this kit

Zoom in (1)

Sport exhaust set with dual centre "GT3" outlets and "Big Bore" heat exchanger. Porsche 911 1963-83

Code: 1620802010

Sport exhaust set with dual centre Ø63 mm "GT3" outlets including "Big Bore" heat exchanger with Ø41 mm tubes. For 2.7/3.0 models also add oil tubes and remove lower rear panel

Improve exhaust gas flow using these "big bore" SSi heat exchangers and GT3 style exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

ssi

Fits:
Porsche 911 2.0ltr -2.4ltr 01/1963-07/1973
Porsche 911 2.7L-3.0ltr 08/1973-10/1983
Porsche 914/6 2.0ltr 11/1969-12/1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620802010

1620802010

92.295SSI

The product you are viewing cross references to these numbers

About this kit

Zoom in (1)

Exhaust conversion set. Porsche 911 2.7-3.0L 1974-83

Code: 1620000810

Exhaust conversion set.

ssi

Fits:
Porsche 911 2.7-3.0L 08/1973-07/1983

Exhaust conversion set, free-flow, with 60 mm tail pipe. You will need to convert the oil pipe system due to change of heat exchangers's shape. All oil pipes necessary are provided with this kit.

Material: Stainless Steel
Number of Inlets / Outlets: 2/1
Outer Diameter: 60 mm
Surface: Blank

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620000810

1620000810

92.289SSI

The product you are viewing cross references to these numbers

Zoom in (2)

Exhaust heat exchanger, Galvanized stainless steel. Porsche 911 2.7L / 911 3.0L 1974-83 / 911SC

Code: 91133091101S41

Exhaust heat exchanger, Stainless steel, fits left or right side.
Ø41 mm outside tubing

dansk

Fits:
Porsche 911 SC/911 Carrera 2.7L-3.0L 08/1975-07/1983

Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091101S41

91.101

91.101G

91.101S

91.101S41

1623102100

93021102501

1623103300

1623103500

1623105800

The product you are viewing cross references to these numbers

Zoom in (1)

Exhaust heat exchangers, Galvanised steel. Porsche 911 2.7L / 911 3.0L 1974-83 / 911SC

Code: 91133091101G

Exhaust heat exchangers, fits left or right side.
GALVANISED STEEL

dansk

Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091101G

91.101

91.101G

91.101S

1623102100

93021102501

1623103300

1623103500

The product you are viewing cross references to these numbers

Zoom in (1)

Exhaust heat exchangers, Mild Steel Painted. Porsche 911 2.7L / 911 3.0L 1974-83 / 911SC

Code: 91133091101

Exhaust Heat Exchangers fits left or right side.
MILD STEEL, PAINTED

dansk

Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091101

91.101

91.101G

91.101S

1623102100

93021102501

1623103300

1623103500

The product you are viewing cross references to these numbers

Zoom in (1)

Exhaust heat exchangers, Polished stainless steel . Porsche 911 2.7L / 911 3.0L 1974-83 / 911SC

Code: 91133091101S

Exhaust heat exchangers fits left or right side.
POLISHED STAINLESS STEEL

dansk

Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091101S

91.101

91.101G

91.101S

1623102100

93021102501

1623103300

1623103500

The product you are viewing cross references to these numbers

Zoom in (2)

Heat control box connecting piece for SSI heat exchangers. Porsche 911

Code: 91165911901/2

Heat control box connecting piece for SSI heat exchangers.

ssi

Fits:
Porsche 911 2.7L-3.3 08/1973-07/1986

Click 'Zoom in' for large parts diagram.
Diagram ref 20.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91165911901

91165911900

91165911901

The product you are viewing cross references to these numbers

Zoom in (2)

Heat exchanger elbow connector, Stainless steel. Porsche 911 1975-83 / 930 Turbo

Code: 91121113100/2

Stainless steel heat exchanger elbow connector.

dansk

Fits:
Porsche 911Carrera 3.0 1976-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121113100

91121113100

1623150100

91121113101

1623150200

The product you are viewing cross references to these numbers

Zoom in (4) Zoom in (4) Zoom in (4) Zoom in (4)

Heat exchanger elbow connector. Porsche 911 1975-83 / 930 Turbo

Code: 91121113100

Heat exchanger elbow connector

porsche

Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121113100

91121113100

1623150100

The product you are viewing cross references to these numbers

Zoom in (1)

Heat exchanger mounting kit. Porsche 911 74-86

Code: PCG91121100

Heat exchanger mounting kit.

porsche

Fits:
Porsche 911 1974-86

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG91121100

PCG91121100

93011119113

090007606402

99908500102

90007428202

9009100970C

93011119206

91111118903

91111118802

91111118700

90007437801

90007423302

90091009602

93011119307

The product you are viewing cross references to these numbers

Zoom in (1)

Heat exchanger mounting kit. Porsche 911 74-86

Code: PCG91121100/1

Mounting kit for exhaust.

oematch

Fits:
Porsche 911 2.7L / 3.0L / 3.2L 08/73-07/85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG91121100

PCG91121100

93011119113

090007606402

99908500102

90007428202

9009100970C

93011119206

91111118903

91111118802

91111118700

90007437801

90007423302

90091009602

93011119307

1621701910

99908500103

The product you are viewing cross references to these numbers

Zoom in (2)

Heat exchanger set, 41mm outer tubes. Porsche 911 (Conversion) 3.2L

Code: 1623106810

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

ssi

IMPORTANT: Major modification needed on engine tin ware when installing on 3.2ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.2ltr 08/1983 - 07/1989

Core Length: 470 mm
Core Width: 760 mm
Core Depth: 380 mm
Outer diameter: 41 mm

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the by products of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623106810

91.917SSI41

1623106810

The product you are viewing cross references to these numbers

Zoom in (2)

Heat exchanger set, 41mm outer tubes. Porsche 911 (Conversion) 3.6ltr

Code: 1623107110

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you carrying out an engine swap to fit a 964 / 993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

IMPORTANT: Major modification needed on engine tin ware when installing on 3,6ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.6ltr 01/1963 - 07/1989

Core Length: 470 mm
Core Width: 750 mm
Core Depth: 370 mm
Outer diameter: 41 mm

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623107110

1623107110

91.936SSI41

The product you are viewing cross references to these numbers

Zoom in (4) Zoom in (4) Zoom in (4) Zoom in (4)

Heat Exchanger Sets Stainless Steel Porsche 911 with 964 or 993 3.6L Engine

Code: 91133091936SSI

Heat Exchanger Sets Stainless Steel PORSCHE 911 FITTED WITH 964 or 993 3.6L ENGINE
Price is for a SET OF 2

Are you carrying out an engine swap to fit a 964/993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the side and centre silencers and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.

Fits:
Porsche 911 1964-89
Porsche 911 fitted with 964 or 993 3.6L Engine

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091936SSI

91.936SSI

1623105310

91936SSI

The product you are viewing cross references to these numbers

Zoom in (2)

Heat exchanger sets USA 1980-83 911 3.0ltr Porsche 911 K-Jet Engine (none mechanical injection engines)

Code: 1623105110

Heat Exchanger Sets USA 1980-83 911 3.0ltr Porsche 911 K-Jet Engine Thick Flanges

Price is for a SET OF 2
Made by SSI

Fits: USA MODELS
PORSCHE 911 07/77 - 06/80 3.0L Petrol 180bhp 930.03, 930.13
PORSCHE 911 09/79 - 06/80 3.0L Petrol 188bhp 930.09, 930.19
PORSCHE 911 08/80 - 07/83 3.0L Petrol 204bhp 930.10
PORSCHE 911 03/74 - 10/83 3.0L Petrol 209bhp From 1979/08, To 1983/07

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623105110

1623105110

91.915SSI

91915SSI

The product you are viewing cross references to these numbers

Zoom in (3) Zoom in (3) Zoom in (3)

Heat exchanger sets, Stainless steel. Porsche 911 K-Jet Engine SSI

Code: 91133091911SSI

Heat Exchanger Sets Stainless Steel Porsche 911 K-Jet Engine SSI

ssi

Replace the rusty, steel heat exchangers with these high quality stainless steel SSi units.
Made using AISI 321/EN4531 titanium stabilized stainless steel, these heat exchangers offer long life, increased power output and a quality fit.

Price is for a SET OF 2

Fits:
K-jet (none mechanical injection engines)
911 (carb.) Europe 2.0L 01/63-07/73
911 (carb.) USA 2.0L-2.4L 08/65-07/71
911 (inj.) Europe 2.0L-2.4L 08/68-07/71
911 (inj.) USA 2.0L-2.4L 08/68-07/71
911 Europe 2.7L 08/73-07/75
911 Europe 3.0L 08/77-07/83
911 USA Federal 2.7L 08/74-07/75
911 USA Federal 3.0L 08/77-07/78

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091911SSI

91911SSI

1623104910

91911SSI

The product you are viewing cross references to these numbers

Zoom in (2)

Heater Hose Pipe from Heat Exchanger. Porsche 911 1975-83

Code: 91121155300

Heater Hose Pipe from Heat Exchanger.
porsche

Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83

Click 'zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121155300

91121155300

The product you are viewing cross references to these numbers

Zoom in (1)

Titanium exhaust head stud kit. Porsche 911 / 930 Turbo (L 45mm)

Code: SL-Ti-122

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.

silverlake

Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 3.0L SC
Porsche 911 3.2L 1984-89
Porsche 930 turbo
Porsche 965 turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-122

99906223902

99908400201

The product you are viewing cross references to these numbers

DISPLAYING 1 to 24 (of 24 products)

Also found on these pages

About Heat Exchangers

Title: Upgrading Your Porsche with Exhaust Heat Exchangers: Technical Specifications and Benefits

Improved Performance: Upgrading your Porsche's exhaust heat exchangers, whether with an original Porsche or after-market option, can significantly enhance your vehicle's performance. The improved design and materials used in these heat exchangers help to optimize exhaust flow, resulting in increased horsepower and torque.

Efficient Heat Dissipation: Exhaust heat exchangers play a crucial role in dissipating the excess heat generated by your Porsche's engine. Upgrading to high-quality heat exchangers ensures efficient heat dissipation, preventing overheating issues and prolonging the life of your engine.

Enhanced Durability: Original Porsche or after-market exhaust heat exchangers are built using durable materials, such as stainless steel or high-grade alloys. These robust components offer superior resistance to corrosion, heat, and vibrations, ensuring long-lasting performance and reliability.

Emissions Compliance: Upgrading your Porsche's exhaust heat exchangers can help your vehicle comply with emissions regulations. Many aftermarket options are designed to meet or exceed emission standards while maintaining optimum performance levels.

Precise Fitment: When purchasing exhaust heat exchangers for your Porsche, it is crucial to ensure they are specifically designed to fit your vehicle model and engine type. This ensures a seamless installation process and optimal functionality.

At Design911, we specialize in providing high-quality Porsche parts, including original Porsche and after-market exhaust heat exchangers. Our extensive inventory and knowledgeable staff allow us to help you find the correct part for your Porsche model. We offer professional advice, ensuring you make an informed decision based on your specific requirements. Trust us to provide the best solutions to upgrade or replace your Porsche's exhaust heat exchangers, improving performance, durability, and overall driving experience. Contact us today to explore our range of Porsche parts and benefit from our expertise.

Enter your VAT number here and click Verify:

Heat Exchangers

Heat Exchangers