Dashboard RHD (Restoration)

Ashtray handle cover, Black Leatherette

Fits:
Porsche 911 SC 1978-83
Porsche 911 1984-86

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901552050257AE

The product you are viewing cross references to these numbers

OE Match black leatherette cover for the ashtray handle on selected classic Porsche 911 models. Intended for interior refurbishment where the existing handle trim is worn or damaged.

Fits

• Porsche 911 1984-86
• Porsche 911 SC 1978-83 
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering. 

What This Product Does

This cover forms the visible trim surface of the ashtray handle. It provides a replacement for deteriorated trim during a localised repair or a wider dashboard refurbishment, without being a replacement for the complete dashboard.

Functions

• Covers the ashtray handle.
• Renews a worn interior touch point.
• Provides black leatherette trim for the ashtray area.
  
  

Technical Details

• Product reference: 901552050257AE.
• Brand: OE Match.
• Colour: black.
• Covering: leatherette.
  
  

Symptoms of Fault

• Visible wear or fading on the handle covering.
• Cracked or damaged trim around the handle.
• A loose cover or damaged attachment points requiring inspection.
  
  

Why Replacement Matters

Renewing damaged handle trim addresses a frequently handled part of the cabin during restoration. OE Match focuses on Porsche replacement applications; selecting the correct version remains important because model-year and trim differences can affect fit. Inspect the underlying handle and its fixing points before installation, as a new cover will not repair damage elsewhere in the assembly.

FAQs

Is this a complete ashtray?
The product is identified as an ashtray handle cover, not a complete ashtray assembly.

Does the finish match every black interior?
The specified covering is black leatherette. Compare it with the existing trim, particularly where neighbouring surfaces have faded or been replaced previously.

What should be checked before fitting?
Compare the original handle, vehicle details and reference number. Inspect the surrounding trim and mounting points before removing or installing the cover.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901552050257AE

The product you are viewing cross references to these numbers

Ashtray handle, Leatherette, Black.

Fits:
Porsche 911 1986-89
Porsche 964 >>1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552050017AE

The product you are viewing cross references to these numbers

Centre air vent.

Fits:
Porsche 911 1977-85
Porsche 930 Turbo >>1985

Options:
- Cars with air conditioning
- Cars without air conditioning

Please Select below

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115710670

The product you are viewing cross references to these numbers

Cover for heating nozzle (SET OF 2) Porsche 911/912

Fits:
Porsche 911/912 1969-86
Porsche 911 Turbo 1975-77

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155240910

The product you are viewing cross references to these numbers

Dash Heating / Defroster Vent Trim.
Replacement dashboard heating/defroster vent trim on classic Porsche 911, 912 and 930 models (covering years 1969–1985). This trim piece fits into the dashboard under the windscreen and gives a finished, appearance while directing airflow from the heating/ventilation system into the cabin. 

Fits:
Porsche 911/912 1969 - 1986
Porsche 911 Turbo 1975 - 1977

Diagram ref no 2 (Left) or 3 (Right)

• Position: Right-hand /  Left-hand  side dashboard heating/defroster vent trim, beneath the windscreen

• Typical Use: Replacement during interior restoration, dash refurbishing, or when original vent trim is cracked, broken or missing

The original dashboard vent trims are often made from materials that become brittle over time. They can crack or break easily under stress or vibration - leaving gaps in the ventilation system, reducing cabin airflow, and detracting from the interior’s appearance. A missing or damaged vent trim can also rattle or misalign, compromising both comfort and aesthetics. Installing an replacement restores proper airflow, secures the vent assembly, and brings the interior back to factory-correct condition.

When to replace.  Consider replacing this trim when:
• The existing vent trim is cracked, broken, warped or missing
•  You are restoring or refurbishing the interior of a vintage 911, 912 or 930
•  You notice impaired airflow or vent misalignment from the dashboard vents
•  The dash is being removed or serviced (e.g., re-painting, wiring, HVAC work) and trim pieces have been lost or damaged



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115524

The product you are viewing cross references to these numbers

Cover for heating nozzle

Fits:
Porsche 911/912 1969-86
Porsche 911 Turbo 1975-77

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115524

The product you are viewing cross references to these numbers

This OE Match aluminium dash support frame is for right-hand-drive Porsche 911 restoration and G-model backdate work. It incorporates the factory ventilation opening and provision for a radio.

Fits

• 911 1969-73
• 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• 911 1975-1977 3.0L Turbo (930)
• 911 1978-1989 3.3L Turbo (930)
• 911 1984-1986 3.2L
• 911 1987-1989 3.2L G50
• 911 1978-1983 3.0L / SC

For G-model applications from 1974 onwards, this frame is used to recreate the aluminium dashboard appearance associated with early-1970s cars. Modification may be required; check the existing dashboard configuration rather than assuming every listed application needs identical fitting work.

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

The frame forms part of the dashboard fascia assembly, providing the aluminium trim structure around the relevant openings. It suits refurbishment of an early RHD dashboard or a later-car conversion intended to reproduce that earlier appearance.

Functions

• Provides a supporting frame for the dashboard fascia.
• Accommodates the factory vent opening and radio layout.
• Creates the earlier aluminium-trim appearance during backdate work.

Technical Details

• Component: dashboard support and trim frame set.
• Material: aluminium, manufactured by extrusion followed by milling.
• Drive configuration: Right Hand Drive (RHD).
• Dashboard specification: factory air vent cut-out, with Radio.
• Early application: Porsche 911, 1969–73.
• Later use: Porsche 911 G-model backdate projects, 1974–89; modification may be required.

Symptoms of Fault

Loose dashboard sections, rattling, damaged mounting points or poor fascia alignment warrant inspection. Previous stereo alterations can also leave unsuitable cuts around the radio area. Establish whether the frame, its fixings or adjoining trim is responsible before replacing components.

Why Replacement Matters

A replacement frame can address damaged dashboard support or provide the appropriate starting point for an earlier-style interior conversion. Inspect neighbouring mounts and trim during dismantling so that existing damage is not carried into the rebuilt assembly.

FAQs

Are dashboard facings supplied?
"Basketweave" or plain vinyl dashboard facings are not included but can be ordered separately.

Are specialist installation tools necessary?
Installation requires no specific tools. Modification may nevertheless be necessary for the particular dashboard being restored or converted.

What should be checked before fitting?
Confirm the RHD layout, vent opening and radio arrangement. Record connections during dismantling and inspect accessible ducting, clips and mounting points before reassembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155201030

The product you are viewing cross references to these numbers

Dashboard centre cover trim. Black. For RHD Cars.

Fits:
Porsche 911 1984-89 RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552480137AE

The product you are viewing cross references to these numbers

Dashboard Complete in BLACK Leatherette RHD


Fits:
Porsche 911 1978-85 RHD CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552056047AE

The product you are viewing cross references to these numbers

Dashboard, Right-Hand Drive, Black artificial leather, covered in original ABS.



Fits:
RHD (Right-Hand Drive) cars
Porsche 911 1986 - 1989 
Porsche 964
Porsche 993
Diagram ref no 1

OE Match dashboard assembly finished in quality black artificial leather, designed as a direct-fit replacement for the original Porsche interior panel on right-hand-drive (RHD) Porsche 911 vehicles from 1986 to 1989.

Ideal for restoration and repair applications, it is supplied fully finished in black artificial leather for a premium look that closely matches the original interior finish of classic 911 models.

The dashboard assembly serves as the primary interior fascia at the front of the cockpit, supporting and housing the instrument cluster, controls, vents, and trim components. It forms both the functional interface for driver controls and gauges, and the primary visual focal point of the cabin.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552056057AE

The product you are viewing cross references to these numbers

Dashboard complete raw to be re-covered, for RHD (Right hand drive) cars.



Fits:
RHD (Right-hand drive) cars
Porsche 911 1986 - 1989

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG55205605

The product you are viewing cross references to these numbers

Dashboard, Right-Hand Drive, Blank / Unfinished.



Fits:
RHD (Right-Hand Drive) cars
Porsche 911 1986 - 1989
Porsche 964
Porsche 993

Diagram ref no 1

OE Match right-hand-drive dashboard supplied as a blank, raw unit ready for re-covering or upholstery. It is engineered to match the factory Porsche dashboard geometry and fitment for RHD vehicles spanning the late 911 G-Series, early 964, and early 993 platforms.

It is ideal for restorers, re-upholsterers, or performance shops seeking a high-quality base for a customised interior or a concours-level dash re-cover project.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG55205605

The product you are viewing cross references to these numbers

Dashboard cover trim. Black.

Fits:
Porsche 911 1986-89 RHD cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552478107AE

The product you are viewing cross references to these numbers

Dashboard Glove compartment lid. Black.

Fits:
Porsche 911 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552488047AE

The product you are viewing cross references to these numbers

Dashboard lower face panel.

Fits:
Porsche 911 / 930 1977-85

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150202234GRV

The product you are viewing cross references to these numbers