Exhaust Package

Exhaust & Heat Exchanger Single Outlet System Porsche 911 1984-89 BIG BORE 84mm tail pipe

1 x Stainless steel Sports exhaust with big bore 84mm outlet,
2 x Stainless steel heat exchangers.
1 x Stainless steel Standard pre-silencer.
1 x Stainless steel cross over pipe.

This system offers more bhp and a fuller sound.

Fits:
Porsche 911 3.2L 1984-89

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT11

The product you are viewing cross references to these numbers

Exhaust & Heat Exchanger Single Outlet System Porsche 911 1984-89 STANDARD size 60mm tailpipe


1 x Stainless steel Sports exhaust 60mm outlet,
2 x Stainless steel heat exchangers.
1 x Stainless steel Standard pre-silencer.
1 x Stainless steel Standard cross over pipe.

Fits:
Porsche 911 3.2L 1984-89

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT11STD

The product you are viewing cross references to these numbers

Exhaust & Heat Exchangers Package for Porsche 911 3.2L 1984-89

Mild steel exhaust system:
- 1 x Mild steel rear exhaust box.
- 2 x Mild steel heat exchangers.
- 1 x Mild steel pre-silencer.
- 1 x Mild steel cross over pipe.

Fits:
Porsche 911 1984-89 3.2L

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT04

The product you are viewing cross references to these numbers

Exhaust Package. Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark

Fits:
Porsche 911 1984-89 3.2L

Please note the heating system will need to be re-worked so extra parts are included 1 x heater splitter box and 2 x heater hoses. you should also purchase EXHAUSTKIT09

For more information about this product Click Here

Kit Includes:
- 1 x single outlet rear silencer (Dansk)
- 2 x heat exchangers, (Dansk)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT06

The product you are viewing cross references to these numbers

Exhaust & Heat Exchangers Package SSI. Porsche 911 1984-89

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use this exhaust and SSi heat exchanger package to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.

Heat Exchangers & Single Outlet Rear Silencer/Muffler 84mm Tail Pipe 92.512S

Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark you should also purchase EXHAUSTKIT09

Fits:
Porsche 911 1984-89 3.2ltr

Kit Includes:
- 1 x single outlet rear silencer (Dansk)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.

Please note the heating system will need to be re-worked so extra parts are included 1 x heater splitter box and 2 x heater hoses.

For more information about this product Click Here

Exhaust & Heat Exchangers Package SSI. Porsche 911 1984-89

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use this exhaust and SSi heat exchanger package to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.

Fits:
Porsche 911 1984-89 3.2ltr

SSI Heat Exchangers & SSI Single Outlet Exhaust Silencer/Muffler

Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark

Kit Includes:
- 1 x single outlet rear silencer (SSI)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.

Please note the heating system will need to be re-worked so extra parts are included 1 x heater splitter box and 2 x heater hoses.

For more information about this product Click Here

Exhaust & Heat Exchangers Package SSI. Porsche 911 1984-89

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use this twin outlet exhaust and  SSi heat exchanger package to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, two out" system.

Fits:
Porsche 911 1984-89 3.2L

SSI Heat Exchangers & SSI Twin Outlet Rear Silencer/Muffler

Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound.

Kit Includes:
- 1 x Twin outlet rear silencer (SSI)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.

Please note the heating system will need to be re-worked so extra parts are included 1 x heater splitter box and 2 x heater hoses.

For more information about this product Click Here

Exhaust & Heat Exchangers Twin Outlet System Porsche 911 1984-89

1 x Stainless steel Sports exhaust with twin big bore 84mm outlets.
2 x Stainless steel heat exchangers.
1 x Stainless steel Standard pre-silencer.
1 x Stainless steel cross over pipe.

offering more bhp and a fuller sound.

Fits:
Porsche 911 3.2L 1984-89

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT21

The product you are viewing cross references to these numbers

Exhaust Hardware Package Straight Though System

This set can be used when fitting the straight though system to Porsche 911 2.7L / 3.0L / SC / 3.2L. These parts will help with the air ducting and make a tidy finish instead of cutting holes on the existing tin ware

Fits:
Porsche 911 1974-83 2.7L / 3.0L
Porsche 911 1984-89 3.2L

Kit Includes:
- 2 x Side Tin Ware Left & Right
- 2 x End Tin ware with holes
-10 x Bolts Hex head
-10 x Washers
- 4 x Hose Clamps
- 2 x Heater Hoses

For more information about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT09

The product you are viewing cross references to these numbers

Exhaust Hardware Package Straight Though System

This set can be used when fitting the straight though system to Porsche 911 2.7L / 3.0L / SC / 3.2L. These parts will help with the air ducting and make a tidy finish instead of cutting holes on the existing tin ware

Fits:
Porsche 911 1974-83 2.7L / 3.0L
Porsche 911 1984-89 3.2L

Kit Includes:
- 2 x Side Tin Ware Left & Right
- 2 x End Tin ware with holes
-10 x Bolts Hex head
-10 x Washers
- 4 x Hose Clamps
- 2 x Heater Hoses

For more information about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT09.OEM

The product you are viewing cross references to these numbers

Exhaust kit, Stainless steel, 1 IN - 1OUT, Outer diameter 84mm.

Fits:
Porsche 911 3.2L 08/83-07/89

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT1020

The product you are viewing cross references to these numbers

Exhaust kit, Stainless steel, 1 IN - 2 OUT, Outer diameter 84mm.

Fits:
Porsche 911 3.2L 08/83-07/89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT1010

The product you are viewing cross references to these numbers

Fabspeed STREET Sport Exhaust Performance Package, Dual Outlet.

The Fabspeed Porsche 911 Carrera 3.2 Sport Performance Package is a comprehensive exhaust, air intake and optional engine tuning upgrade designed for Porsche 911 Carrera 3.2 models manufactured between 1984 and 1989.

Fits:

• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50  

Kit Includes:

• Dual-Outlet Maxflo Performance Exhaust System
• Sport Catalytic Converter
• High Performance Airbox Cover
• BMC F1 Performance Air Filter

Developed by Fabspeed Motorsport, this performance package combines a high-flow Maxflo exhaust system, upgraded exhaust pipework, a performance airbox cover and a BMC F1 air filter to enhance the driving characteristics of the classic air-cooled Porsche flat-six engine.

The package is designed to improve exhaust gas flow, reduce intake restrictions, enhance throttle response and produce a more distinctive sports exhaust note.

The Maxflo exhaust system is constructed using high-quality T304L stainless steel tubing, offering corrosion resistance and durability under demanding operating conditions.

Actual performance improvements depend on the selected package configuration, engine condition, fuel quality, installation and operating conditions.

The Fabspeed Sport Performance Package is particularly suited to Porsche 911 Carrera 3.2 enthusiasts seeking improved engine responsiveness, a more engaging exhaust sound and a coordinated performance upgrade rather than purchasing individual components separately.

What This Product Does:
The Fabspeed Sport Performance Package upgrades several components that influence how the Porsche 911 Carrera 3.2 engine takes in air, expels exhaust gases and responds to driver inputs.

Its main functions and benefits include:

• Improved Exhaust Flow: Reduces restrictions within the selected exhaust system components.
• Enhanced Engine Breathing: Combines intake and exhaust upgrades to support more efficient airflow through the engine.
• Increased Performance Potential: Fabspeed advertises gains of up to 24 hp with the appropriate complete exhaust and DME upgrade configuration.
• Improved Torque Response: The complete configured package is advertised with gains of up to 22 lb-ft of torque.
• Sharper Throttle Response: Designed to make the engine feel more responsive to accelerator input.
• Sportier Exhaust Sound: Produces a deeper, more pronounced sports exhaust note.
• Reduced Exhaust System Weight: Advertised weight saving of approximately 17 lb (8 kg).
• Improved Intake Airflow: The CUP airbox cover and BMC F1 filter help reduce intake restriction.
• Durable Exhaust Construction: T304L stainless steel provides resistance to corrosion and thermal deterioration.
• Coordinated Performance Upgrade: Combines complementary components in one package.
  
  

Symptoms Of Wear Or Failure:
The Fabspeed Sport Performance Package is primarily a performance upgrade rather than a routine replacement or repair kit.

However, owners may consider upgrading when the original exhaust or intake system shows signs of ageing, deterioration or reduced performance.

Common symptoms associated with worn or damaged factory components include:

Exhaust System Symptoms

• Excessive Exhaust Corrosion: Rust around the original muffler, pipework or joints may weaken the exhaust system.
• Exhaust Leaks: Damaged joints, cracks or deteriorated connections may cause escaping exhaust gases.
• Unusual Exhaust Noises: Rattling, blowing sounds or metallic vibrations may indicate damage to the original exhaust.
• Deteriorated Exhaust Muffler: Internal corrosion or loose internal components may produce unwanted rattling or changes in exhaust sound.
• Visible Exhaust Damage: Impacts, damaged brackets or cracked pipework can affect the condition of the original system.
• Exhaust Fumes Around the Vehicle: Leaks can allow exhaust gases to escape from unintended locations and require prompt investigation.

Why Replacement / Upgrading Matters:

• Upgrading the original intake and exhaust system can provide a more engaging driving experience while allowing owners to replace ageing components with modern performance-oriented alternatives.
• The Porsche 911 Carrera 3.2 is known for its naturally aspirated air-cooled flat-six engine, distinctive exhaust character and mechanical driving feel.
• The original exhaust and intake systems were engineered to balance performance, noise, emissions requirements and everyday usability.
• The Fabspeed Sport Performance Package is designed for owners seeking a more performance-focused configuration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR911SSPKG32D

The product you are viewing cross references to these numbers

Fabspeed STREET Sport Exhaust Performance Package, Single Outlet.

The Fabspeed Porsche 911 Carrera 3.2 Sport Performance Package is a comprehensive exhaust, air intake and optional engine tuning upgrade designed for Porsche 911 Carrera 3.2 models manufactured between 1984 and 1989.

Fits:

• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50  

Kit Includes:

• Single-Outlet Maxflo Performance Exhaust System
• Sport Catalytic Converter
• High Performance Airbox Cover
• BMC F1 Performance Air Filter

Developed by Fabspeed Motorsport, this performance package combines a high-flow Maxflo exhaust system, upgraded exhaust pipework, a performance airbox cover and a BMC F1 air filter to enhance the driving characteristics of the classic air-cooled Porsche flat-six engine.

The package is designed to improve exhaust gas flow, reduce intake restrictions, enhance throttle response and produce a more distinctive sports exhaust note.

The Maxflo exhaust system is constructed using high-quality T304L stainless steel tubing, offering corrosion resistance and durability under demanding operating conditions.

Actual performance improvements depend on the selected package configuration, engine condition, fuel quality, installation and operating conditions.

The Fabspeed Sport Performance Package is particularly suited to Porsche 911 Carrera 3.2 enthusiasts seeking improved engine responsiveness, a more engaging exhaust sound and a coordinated performance upgrade rather than purchasing individual components separately.

What This Product Does:
The Fabspeed Sport Performance Package upgrades several components that influence how the Porsche 911 Carrera 3.2 engine takes in air, expels exhaust gases and responds to driver inputs.

Its main functions and benefits include:

• Improved Exhaust Flow: Reduces restrictions within the selected exhaust system components.
• Enhanced Engine Breathing: Combines intake and exhaust upgrades to support more efficient airflow through the engine.
• Increased Performance Potential: Fabspeed advertises gains of up to 24 hp with the appropriate complete exhaust and DME upgrade configuration.
• Improved Torque Response: The complete configured package is advertised with gains of up to 22 lb-ft of torque.
• Sharper Throttle Response: Designed to make the engine feel more responsive to accelerator input.
• Sportier Exhaust Sound: Produces a deeper, more pronounced sports exhaust note.
• Reduced Exhaust System Weight: Advertised weight saving of approximately 17 lb (8 kg).
• Improved Intake Airflow: The CUP airbox cover and BMC F1 filter help reduce intake restriction.
• Durable Exhaust Construction: T304L stainless steel provides resistance to corrosion and thermal deterioration.
• Coordinated Performance Upgrade: Combines complementary components in one package.
  
  

Symptoms Of Wear Or Failure:
The Fabspeed Sport Performance Package is primarily a performance upgrade rather than a routine replacement or repair kit.

However, owners may consider upgrading when the original exhaust or intake system shows signs of ageing, deterioration or reduced performance.

Common symptoms associated with worn or damaged factory components include:

Exhaust System Symptoms

• Excessive Exhaust Corrosion: Rust around the original muffler, pipework or joints may weaken the exhaust system.
• Exhaust Leaks: Damaged joints, cracks or deteriorated connections may cause escaping exhaust gases.
• Unusual Exhaust Noises: Rattling, blowing sounds or metallic vibrations may indicate damage to the original exhaust.
• Deteriorated Exhaust Muffler: Internal corrosion or loose internal components may produce unwanted rattling or changes in exhaust sound.
• Visible Exhaust Damage: Impacts, damaged brackets or cracked pipework can affect the condition of the original system.
• Exhaust Fumes Around the Vehicle: Leaks can allow exhaust gases to escape from unintended locations and require prompt investigation.

Why Replacement / Upgrading Matters:

• Upgrading the original intake and exhaust system can provide a more engaging driving experience while allowing owners to replace ageing components with modern performance-oriented alternatives.
• The Porsche 911 Carrera 3.2 is known for its naturally aspirated air-cooled flat-six engine, distinctive exhaust character and mechanical driving feel.
• The original exhaust and intake systems were engineered to balance performance, noise, emissions requirements and everyday usability.
• The Fabspeed Sport Performance Package is designed for owners seeking a more performance-focused configuration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR911SSPKG32S

The product you are viewing cross references to these numbers

The Switchable Valved Exhaust Kit “1 IN 1 OUT” Style is a complete OEM-quality exhaust system designed for classic Porsche 911 models. Featuring a single inlet, single outlet configuration with an integrated valve system, this setup allows drivers to switch between a refined, quieter exhaust note and a more aggressive, performance-focused sound.

Kit Contents:

x1 Exhaust Heat Exchangers (Pair) (3606001101)
x1 Exhaust Pre Silencer (3606501101/1)
x1 Rear Silencer With Valves "1 IN 1 OUT" (3606001105)
x1 Exhaust Cross Over Pipe (3606001107)
x6 Exhaust Gasket Heat Exchanger To Cylinder Head (93011119112/1)
x6 Exhaust Barrell Nut (99908500103/1)
x6 Exhaust Hexagon Nut  (9000760250C)
x12 Exhaust Bolt (90007428203/1)
x2 Exhaust Gasket Heat Exchangers To Cross Over Pipe (93011119206/1)
x1 Exhaust Gasket Cross Over Pipe To Pre Silencer (93011119308/1)
x1 Exhaust Rear Silencer Gasket (91111119102/1)
x12 Exhaust Nut (90091009701/1)
x1 Switch Set For Sound Valves (9996001111)

Fits:

• Porsche 911 3.2L 1984-89

What This Product Does:

• Provides switchable exhaust sound control (quiet vs sport mode)
  
• Maintains balanced exhaust flow with 1-in-1-out configuration
  
• Enhances driving experience with adjustable sound levels
  
• Supports efficient exhaust gas flow Ensures complete installation with included mounting hardware

Symptoms Of Wear Or Failure (Stock System):

• Exhaust leaks from corroded or damaged components
• Rust or deterioration of silencers and pipes
• Restricted exhaust flow reducing engine performance
• Excessive or inconsistent exhaust noise
• Loose or failing mounting hardware
• Lack of sound control compared to modern valved systems  

Why Replacement Matters:

• Restores proper exhaust function and flow
• Allows adjustable sound levels, combining comfort and performance
• Enhances driving enjoyment with on-demand sport exhaust tone
• Eliminates leaks and structural weaknesses
• Improves durability with high-quality materials
• Ideal for restoration or upgrade, adding modern functionality to classic Porsche models  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT911.2.2

The product you are viewing cross references to these numbers

The Switchable Valved Exhaust Kit “1 IN 2 OUT” Style with Double Walled Slash Cut Tailpipes is a complete OEM-quality performance exhaust system designed for classic Porsche 911 models.

Kit Contents:

x1 Exhaust Heat Exchangers (Pair) (3606001101)
x1 Exhaust Pre Silencer (3606501101/1)
x1 Rear Silencer With Valves "1 IN 2 OUT" Style (3606001104)
x1 Exhaust Tailpipe Double Walled Slash Cut (3606001108)
x6 Exhaust Gasket Heat Exchanger To Cylinder Head (93011119112/1)
x6 Exhaust Barrell Nut (99908500103/1)
x6 Exhaust Hexagon Nut  (9000760250C)
x12 Exhaust Bolt (90007428203/1)
x2 Exhaust Gasket Heat Exchangers To Cross Over Pipe (93011119206/1)
x1 Exhaust Gasket Cross Over Pipe To Pre Silencer (93011119308/1)
x1 Exhaust Rear Silencer Gasket (91111119102/1)
x12 Exhaust Nut (90091009701/1)
x1 Switch Set For Sound Valves (9996001111)

Fits:

• Porsche 911 3.2L 1984-89

What This Product Does:

• Provides switchable exhaust sound control (quiet vs sport mode)
• Improves exhaust flow with a 1-in, 2-out configuration
• Enhances engine performance and responsiveness
• Delivers a deeper, sportier exhaust tone when valves are open
• Features double-walled slash-cut tailpipes for premium styling and durability
• Ensures correct fitment and alignment with complete mounting hardware     

Symptoms Of Wear Or Failure (Stock System):

• Exhaust leaks from corroded or damaged components
• Rust or deterioration of pipes, silencers, or tailpipes
• Restricted airflow leading to reduced engine performance
• Excessive or irregular exhaust noise
• Loose or failing mounting hardware
• Worn or damaged exhaust tips affecting appearance  

Why Replacement Matters:

• Restores and improves exhaust flow, enhancing engine efficiency
• Provides adjustable sound levels, combining comfort and performance
• Enhances driving experience with on-demand exhaust tone
• Upgrades vehicle appearance with premium slash-cut tailpipes
• Eliminates leaks and structural weaknesses
• Ensures long-term durability with high-quality materials
• Adds modern functionality to classic Porsche models while maintaining character  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT911.2.4

The product you are viewing cross references to these numbers