Throttle Body / Plenum Chamber

Fits:
Porsche 911 - 1974 - 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

911 used 2-Bolt type
964/993 uses 3-Bolt type

Please Note: 
The aluminium or plastic intake plenum (inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine, now also for turbo or supercharged cars.

To be used when converting a G-Model 911 or a 964/993 engine to a turbocharged/supercharged engine with a 964 induction based Drive by Wire set-up

Conversion kit to a Porsche 964 based intake system to become a DBW (Drive by wire) intake based 74mm original Bosch throttle body (Sometimes referred to as 76mm) specifically executed all in CNC milled billet aluminum.

This is sold either with the intention to convert a Porsche 964/993 engine or to adapt and convert a 964 intake onto a G-model car when turbocharging.

Kit includes:

• Throttle body runner for 74mm throttle body in aluminum 
• Vacuum port on throttle body runner
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Connecting pipe out of aluminum replacing the resonance tube

Intake runners for the Porsche 911 G-model (2-bolt) or 964/993 (3-bolt) engine are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. 

The following parts are to be reused from your original 964 intake:
Rubber boots and clamps
The plenums (inlet manifolds)

Please Note:
Aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Fits:
Porsche 911 - 1974 to 1989

Please Note: 
The aluminium or plastic intake plenum (inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert the Porsche 964 intake into this version. 
This kit does not come with 964 intake manifolds so you will need so source a pair separately.

The intake also exists in two versions (billet aluminium or PA12 plastic) - This is the premium version where the throttle body runner is milled out of a billet in aluminum. This is the pinnacle of craftmanship giving a very solid feel to the intake at a natural premium. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!

For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum (inlet manifold) is not included in the kit.

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert the Porsche 964 intake into this version.  This kit does not come with 964 intake manifolds so you will need so source a pair  separately.

The intake also exists in two versions (billet aluminium or PA12 plastic) - this version is what we at Islandworks use with all other intakes, being a modified PA12 material from an industrial manufacturing process. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid.
For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

PMO EFI Throttle Body Kit – Black Anodized “R” Finish – 40mm / 46mm / 50mm

Upgrade your classic air-cooled Porsche to modern electronic fuel injection with the PMO EFI Throttle Body Kit, available in 40mm, 46mm and 50mm sizes with the distinctive Black Anodized “R” finish.

Fits

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 914-6 (1970-1976)

Designed for air-cooled six-cylinder Porsche engines from 1965 to 1998, PMO individual throttle bodies combine the classic appearance and response of traditional carburettors with the accurate fuel control and tuning possibilities of modern EFI.

The Black Anodized “R” finish gives the throttle bodies a purposeful vintage competition appearance, making them particularly suited to performance, restomod and motorsport-inspired Porsche engine builds.

Inlet Manifolds, Fuel Injectors and Throttle Position Sensor (TPS) are Not Included

Please note that inlet manifolds, fuel injectors and the TPS shown in product imagery are for reference and are not included with the kit.

What Does the PMO EFI Throttle Body Kit Do?

PMO individual throttle bodies replace carburettors or the existing induction system as part of a complete electronic fuel injection conversion.

Each cylinder receives its own throttle bore, providing direct and responsive airflow. Fuel is delivered through individual injectors controlled by a compatible programmable ECU.

When correctly installed and tuned, benefits can include:

• Sharper throttle response
• Precise electronic fuel control
• Improved engine tuneability
• Better cold starting and driveability
• Accurate control of air/fuel ratios
• Potential improvements in performance and fuel efficiency
• Individual throttle response for each cylinder
• Classic competition appearance with modern EFI technology

40mm, 46mm or 50mm – Which Size?

PMO offers three throttle body sizes to suit different air-cooled Porsche engine specifications.

• 40mm – Ideal for smaller-capacity and road-focused engines where good air velocity, throttle response and low-to-mid-range performance are important.
• 46mm – Suitable for larger-capacity, fast-road and modified engines requiring increased airflow while maintaining excellent throttle response.
• 50mm – Designed for highly modified, large-capacity and competition engines where maximum airflow and high-RPM performance are required.

Correct sizing depends on engine capacity, cylinder heads, camshafts, compression ratio, intended RPM range and power requirements. Consult your engine builder when selecting the appropriate size.

Precision PMO Construction

PMO EFI throttle bodies are precision CNC machined and hand assembled in Anaheim, California using aerospace-grade materials.

Sealed ball bearings provide durability, while the one-piece throttle shaft maintains accurate alignment for smooth and consistent throttle operation.

Tapered 52mm intake throats improve airflow into the throttle bodies, while billet fuel rails accommodate Bosch-style fuel injectors.

EFI Management Compatibility

PMO EFI throttle bodies can be used with programmable engine management systems including Haltech, MegaSquirt, MoTeC and other suitable aftermarket EFI controllers.

The ECU must be correctly configured and tuned for the individual engine specification.

Injector size, fuel pressure, sensors and ECU configuration should be discussed with your engine builder or EFI system supplier before installation.

Converting from Carburettors to EFI

A carburettor-to-EFI conversion requires a suitable high-pressure fuel system in addition to the throttle bodies.

A fuel pump capable of approximately 60 psi is required. The Walbro GSL393 external universal inline fuel pump, rated at approximately 160 LPH, is one suitable option. Another correctly specified 60 psi EFI fuel pump can also be used.

Fuel lines, filters, pressure regulation and associated components must be suitable for EFI operating pressures.

• Fuel rail retaining/injector clip – 534-102
• TPS sensor – 17123852
• Bosch-style fuel injectors
• Suitable high-pressure EFI fuel pump
• Compatible programmable ECU

Fuel injector specification should be selected according to engine capacity, expected power output, fuel type and EFI system requirements.

PMO Black Anodized “R” EFI Throttle Bodies for Air-Cooled Porsche

PMO individual throttle bodies provide an excellent solution for Porsche owners wanting the immediate response and appearance of classic individual induction combined with modern electronic fuel injection.

Available in 40mm, 46mm and 50mm sizes, the system can be matched to road, fast-road, restomod and competition air-cooled Porsche flat-six engines.

The Black Anodized “R” finish provides a distinctive period motorsport appearance, making these throttle bodies particularly suited to classic Porsche 911 performance builds where engine-bay appearance is as important as performance.

PMO EFI Throttle Body Kit – Natural Aluminium Finish – 40mm / 46mm / 50mm

Upgrade your classic air-cooled Porsche to modern electronic fuel injection with the PMO EFI Throttle Body Kit, available with 40mm, 46mm or 50mm throttle bodies in a natural aluminium finish.

Fits

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 914-6 (1970-1976)

Designed for air-cooled six-cylinder Porsche engines from 1965 to 1998, PMO individual throttle bodies combine the classic appearance and response of traditional carburettors with the accurate fuel control and tuning possibilities of modern EFI.

Whether building a responsive road engine, fast-road Porsche or high-performance competition engine, the choice of three throttle body sizes allows the induction system to be matched more closely to your engine specification.

Inlet Manifolds, Fuel Injectors and Throttle Position Sensor (TPS) are Not Included

Please note that inlet manifolds, fuel injectors and the TPS shown in product imagery are for reference and are not included with the kit.

What Does the PMO EFI Throttle Body Kit Do?

PMO individual throttle bodies replace carburettors or the existing induction system as part of an electronic fuel injection conversion.

Each cylinder receives its own throttle bore, providing direct airflow into the engine. Fuel delivery is then electronically controlled through individual injectors and a compatible aftermarket ECU.

When correctly installed and tuned, benefits can include:

• Sharper throttle response
• Precise electronic fuel control
• Improved engine tuneability
• Improved cold starting and driveability
• Better control of air/fuel ratios
• Potential improvements in performance and fuel efficiency
• Individual throttle response for each cylinder
• Classic carburettor-style appearance with modern EFI control

40mm, 46mm or 50mm – Which Size?

PMO EFI throttle bodies are available in three bore sizes to suit different engine specifications.

• 40mm – Well suited to smaller-capacity and road-focused engines where air velocity, low-to-mid-range response and driveability are important.
• 46mm – A good choice for larger-capacity, modified and fast-road engines requiring increased airflow while retaining strong throttle response.
• 50mm – Designed for highly modified, large-capacity and competition engines where maximum airflow and high-RPM performance are priorities.

Correct sizing depends on engine capacity, cylinder heads, camshafts, compression ratio, intended RPM range and power requirements. Consult your engine builder when selecting the appropriate size.

Precision PMO Construction

PMO EFI throttle bodies are precision CNC machined and hand assembled in Anaheim, California using high-quality aerospace-grade materials.

Sealed ball bearings provide durability, while the one-piece throttle shaft maintains accurate alignment and helps provide smooth, consistent throttle operation.

Tapered 52mm intake throats improve airflow into the throttle bodies, while billet fuel rails accommodate Bosch-style fuel injectors.

EFI Management Compatibility

PMO EFI throttle bodies can be used with programmable engine management systems including Haltech, MegaSquirt, MoTeC and other suitable aftermarket EFI controllers.

The ECU must be correctly configured and professionally tuned for the individual engine specification.

Injector size, fuel pressure, sensors and ECU configuration should be discussed with your engine builder or EFI system supplier before installation.

Converting from Carburettors to EFI

Converting a carburetted Porsche engine to EFI requires a suitable high-pressure fuel system in addition to the throttle bodies.

A fuel pump capable of approximately 60 psi is required. The Walbro GSL393 external inline fuel pump, rated at approximately 160 LPH, is one suitable option, although another correctly specified 60 psi universal EFI fuel pump may also be used.

Fuel lines, filtration, pressure regulation and other associated components must also be suitable for EFI operating pressures.

Associated components to added include:

• Fuel rail retaining/injector clip – 534-102
• TPS sensor – 17123852
• Bosch-style fuel injectors
• Suitable high-pressure EFI fuel pump
• Compatible programmable ECU

Injector specification should be selected according to engine capacity, expected power output, fuel type and EFI system requirements.

PMO EFI Throttle Body Kits for Air-Cooled Porsche

PMO individual throttle bodies provide an ideal solution for owners wanting the appearance and immediate response associated with classic carburettor induction while gaining the control and tuning potential of electronic fuel injection.

Available in 40mm, 46mm and 50mm sizes, PMO EFI throttle bodies can be matched to a wide variety of standard, modified and competition air-cooled Porsche flat-six engines.

The natural aluminium finish provides a clean, period-inspired appearance that complements classic Porsche engine bays while concealing modern EFI technology within a traditional individual-throttle-body layout.

Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.

This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.

Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:

• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.

you will need an EFI Installation & control kit which is not included

**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided