Please wait… 
Please wait while we process your order,
do not press the back button… 
Design911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk Facebook Instagram
Porsche specialists based in the UK
Porsche 911 & 912 (1965-1989) 911 1965-1968 2.0L / 912 SWB (F) Rubber Seals

Bonnet / Boot Seals

Bonnet / Boot Seals

Filter by brand
DISPLAYING 1 to 5 (of 5 products)
Front bonnet / hood seal. Porsche 911 / 912 >>1973 - 90151190101, 90151190102, 90151190104, 90151190105, 90151190106 - 1685500200, 9220113
2
Front bonnet / hood seal. Porsche 911 / 912 >>1973
90151190106/1
Product Information
Product Information

Front bonnet / hood seal
OE Match front bonnet / hood seal for Porsche 911 models from 1965 to 1973. This replacement rubber seal fits around the front luggage compartment opening, helping seal the bonnet against the body and reduce the entry of water, dirt and road debris.

Fits

  • Porsche 911 1965–1968 2.0L / 912 SWB (F)
  • Porsche 911 1968–1973 2.2L / 2.4L / 2.7L RS LWB (F)


Diagram ref no 37

What This Product Does

The seal forms a flexible barrier where the closed bonnet meets the surrounding bodywork. Its purpose is to restrict moisture and dirt entering the front luggage compartment through this joint.


Functions

  • Provides sealing around the front bonnet opening.
  • Helps exclude rainwater, dust and debris.
  • Provides cushioning between the bonnet and its sealing surface.


Technical Details

  • Brand: OE Match.
  • Part number: 90151190106.
  • Installation position: front bonnet / hood aperture.
  • Recorded application references: 90151190101, 90151190102, 90151190104 and 90151190105.


Symptoms of Fault

  • Moisture collecting inside the front luggage compartment or spare-wheel recess.
  • Rubber showing splits, brittleness or compressed sections.
  • Seal corners pulling away or leaving gaps.
  • A persistent damp odour around the luggage area.


Why Replacement Matters

Ageing rubber can lose flexibility and stop making consistent contact with the bonnet. Renewing a damaged seal helps address leakage at this joint during maintenance or restoration. Check the surrounding bodywork, drainage channels and bonnet adjustment as well: another leak path or blocked drain will not necessarily be resolved by changing the seal alone.


FAQs

Can treatment restore a hardened seal?
A rubber conditioner may improve its surface condition, but it cannot repair cracks or reverse permanent shrinkage.

What should be checked before fitting?
Remove dirt and old residue from the mounting surface, inspect for corrosion and confirm that drainage paths are clear. Position the replacement without pulling it under tension.

What if the compartment remains wet?
Investigate nearby joints and drainage routes, and check that the bonnet contacts the seal evenly before assuming the replacement is faulty.

Check fitment for your specific vehicle (model, year, engine) before ordering.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151190106
90151190101
90151190102
90151190104
90151190105
90151190106

The product you are viewing cross references to these numbers
Front bonnet / hood seal. Porsche 911 cars Upto 1973 - 90151190102, 90151190105, 90151190106, 90151190104 - 1685500200
2
Front bonnet / hood seal. Porsche 911 cars Upto 1973
Special Order item
90151190106
Product Information
Product Information
Front bonnet / hood seal.

Fits:
Porsche 911 1965-73

Diagram Ref 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151190106
90151190102
90151190105
90151190106
90151190104

The product you are viewing cross references to these numbers
Smuggler's box cover seal. Porsche 911 LHD - 91150449102, 90250449120
2
Smuggler's box cover seal. Porsche 911 LHD
Special Order item
91150449102
Product Information
Product Information
Smuggler's Box Cover Seal for Left Hand Drive Cars Only

Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150449102
91150449102
90250449120

The product you are viewing cross references to these numbers
Smuggler's box cover seal. Porsche 911 LHD - 91150449102, 90250449120 - 911 504 491 02, 1685800800
3
Smuggler's box cover seal. Porsche 911 LHD
91150449102/8
Product Information
Product Information
Smuggler's box cover seal for Left Hand Drive Cars Only
This OE Match smuggler’s box cover seal is a replacement rubber sealing strip used on left-hand drive Porsche 911 models. It fits around the smuggler’s box cover panel in the front luggage compartment, helping seal the cover correctly against the body.  

Fits:
Porsche 911 1965 - 1989

Diagram ref no 22

The smuggler’s box cover seal helps close the gap between the cover and the surrounding body panel. It prevents water, dust, dirt, and road debris from entering the compartment area and helps reduce vibration or rattling from the cover panel.

Functions
•  Seals the smuggler’s box cover in the front luggage compartment
•  Helps prevent water, dust, and dirt entering the compartment
•  Reduces cover panel vibration and rattling
•  Provides a clean OE-style finish around the cover edge
•  Helps protect components housed in or near the smuggler’s box area
•  Replaces worn, cracked, flattened, or missing original seals
•  Suitable for restoration, bodywork repair, or front trunk refurbishment

Why Replace This Part?
Original rubber seals can harden, shrink, split, flatten, or perish with age. A damaged or missing smuggler’s box cover seal may allow moisture and dirt into the compartment and can make the cover sit poorly or rattle. Replacing the seal helps restore the correct factory-style fit, improves protection, and gives the front luggage area a cleaner finished appearance.

When to replace:
•  The original seal is cracked, brittle, flattened, or missing
•  Water, dust, or dirt is entering the smuggler’s box area
•  The cover panel rattles or does not sit correctly
•  The front luggage compartment is being restored
•  The smuggler’s box cover has been removed or replaced
•  The vehicle is undergoing bodywork, repainting, or seal replacement
•  You want to restore the correct OE-style front trunk finish

Where it fits on the car
This seal fits around the smuggler’s box cover panel in the front luggage compartment of left-hand drive Porsche 911 models. The smuggler’s box is located under the front trunk floor area and houses or protects various vehicle components depending on model year and specification.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150449102
91150449102
90250449120

The product you are viewing cross references to these numbers
Weather stripping / rubber seals adhesive - 00004320438, 00004320438, 00004320348, 99991529940
1
Weather stripping / rubber seals adhesive
Special Order item
00004330532
Product Information
Product Information
Weatherstripping adhesive.
Perfect for sealing weatherstripping to door, hood, and trunk panels.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330532
00004320438
00004320438
00004320348
99991529940

The product you are viewing cross references to these numbers
DISPLAYING 1 to 5 (of 5 products)
Also found on these pages
About Bonnet / Boot Seals

Porsche Bonnet & Boot Seals | Design911 Rubber Weather Seals for Body Protection & Longevity

Bonnet and boot seals are vital to preserving the integrity, comfort, and appearance of your Porsche. These precision-fitted rubber seals prevent water, dust, and wind from entering the luggage compartments, ensuring a clean, quiet, and protected environment. In both classic and modern Porsche models, maintaining proper sealing is essential for preventing corrosion, electrical damage, and interior deterioration.

At Design911, we supply a comprehensive range of bonnet and boot rubber seals, designed for an exact fit and long-lasting performance. Manufactured from premium-grade weather-resistant materials, our seals deliver exceptional flexibility, compression recovery, and durability. Whether for restoration, maintenance, or performance detailing, Design911’s sealing components provide professional-grade protection and finish for every Porsche.

What Do Bonnet & Boot Seals Do?

Bonnet and boot seals create a tight barrier between the body panels and the luggage compartments, shielding your Porsche’s structure and interior from external elements.

Core Functions:
• Prevent water, dirt, and air leaks into front and rear compartments.
• Reduce noise, vibration, and harshness (NVH) during driving.
• Protect paintwork and body edges from friction damage.
• Assist with proper panel alignment and secure closure.
• Maintain optimal pressure sealing for climate protection.

High-quality rubber seals are essential for keeping your Porsche dry, quiet, and free from unwanted wear — enhancing both comfort and longevity.

Why Do Bonnet & Boot Seals Fail or Degrade?

Rubber components naturally deteriorate over time due to environmental exposure, pressure cycles, and age-related hardening.

Common Causes of Failure Include:
• UV and ozone damage causing cracking and brittleness.
• Compression set from repeated opening and closing of panels.
• Contamination by oil, fuel, or cleaning chemicals.
• Deformation or tearing from misaligned panels or closures.
• Age-related loss of elasticity reducing sealing effectiveness.

Once seals begin to fail, moisture and dust can infiltrate compartments, leading to corrosion, noise, and costly repairs — making timely replacement crucial.

Why Replace or Upgrade Your Porsche Bonnet & Boot Seals?

Replacing your Porsche’s bonnet or boot seals restores the original comfort, protection, and aesthetic integrity of your car. Upgraded rubber compounds offer improved sealing and longevity over standard materials.

Key Benefits:
• Restores water- and air-tight sealing for front and rear compartments.
• Prevents corrosion, leaks, and unpleasant cabin odours.
• Reduces wind noise and vibration for a smoother drive.
• Precision-engineered for Porsche 911, Cayman, Boxster, Panamera, and 944 models.
• Constructed from high-quality EPDM or neoprene rubber for maximum resilience.
• Ideal for restoration, maintenance, and detailing applications.

Design911’s Porsche bonnet and boot rubber seals deliver the perfect balance of flexibility, compression strength, and durability — ensuring a secure seal that lasts for years.

Highlights

• Premium Porsche bonnet and boot compartment seals.
• Engineered for exact fitment and long-term elasticity.
• Resistant to UV, ozone, and temperature extremes.
• Improves noise isolation and weatherproofing.
• Suitable for both classic and modern Porsche models.
• Perfect for restorations, replacements, or detailing upgrades.

You may also like
Popular Models