Front Section

Front trunk floor pan repair section. 

Fits:

Porsche 914 - 1970 to 1976

No 914 came with air conditioning from the factory, however, many people tried to add it with aftermarket condensers which damaged the trunk floor section. This repair panel will cleanly restore your car back to original, replacing the hacked up factory metal.

Approx. dimensions = 23 inches x 25 inches

Front section of diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450193711

The product you are viewing cross references to these numbers

Front trunk floor pan section. 

Fits:

Porsche 914 - 1970 to 1976

Front section of diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450193711

The product you are viewing cross references to these numbers

Front trunk floor pan section
Front Trunk Floor Pan Section by OE Match for Porsche 914 models built from 1970 to 1976. This repair panel replaces damaged or corroded metal within the front luggage compartment floor.

Fits
Porsche 914 1970 - 1976

Diagram: The front part marked in green in the diagram

What This Product Does

This OE Match floor pan section forms part of the Porsche 914 front luggage compartment. It allows rusted, cut, distorted or previously repaired metal to be removed and replaced while restoring the shape and continuity of the original floor area.

Functions

• Repairs the front trunk floor area.
• Replaces corroded or physically damaged sheet metal.
• Restores the original floor profile during bodywork restoration.
• Provides a sound foundation for associated front-compartment fittings.

Symptoms of Fault

• Visible corrosion, rust holes or flaking metal in the front trunk floor.
• Previous patch repairs that have deteriorated or concealed further corrosion.
• Floor damage caused by impact, incorrect jacking or earlier modifications.
• Distortion, cracking or weakened metal around adjoining seams and fittings.
• Water entering through perforated metal or failed floor seams.
• Uneven or poorly aligned repaired areas within the front compartment.

Why Replacement Matters

Removing weakened metal helps prevent corrosion from continuing beneath patches, coatings or seam sealer. A correctly fitted repair section also restores the floor profile and provides a suitable basis for subsequent preparation, sealing and refinishing.

Installation should follow a careful assessment of the surrounding structure. Any adjoining corrosion must be removed, and the completed repair should be protected using appropriate automotive body preparation and corrosion-control products.

FAQs

• Is this panel suitable for every Porsche 914 model year?
  It is listed for Porsche 914 models from 1970 to 1976. Confirm the vehicle and required repair area before ordering.
• Does the panel require professional installation?
  Body repair panels commonly require cutting, alignment and welding. Installation by an experienced bodywork specialist is recommended.
• Is a coating or finish specified?
  No coating specification is provided in the supplied product information. Prepare and protect the panel according to the chosen installation and refinishing process.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450193811

The product you are viewing cross references to these numbers

Inner Firewall / Transverse Strut (Left and Right).



Fits:
Porsche 914

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450153110

The product you are viewing cross references to these numbers

Jacking point donut on floorpan - left and right hand side

Fits:
Porsche 914 - 1970 to 1976

Front and rear jacking points welded to floorpan corners.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450104110

The product you are viewing cross references to these numbers

Mounting bracket front axle support - fits left or right hand side
Sold each - 2 required per car

Fits:
Porsche 914 - 1970 to 1976

Diagram ref no 11



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450116410

The product you are viewing cross references to these numbers

Mounting panel front suspension A arm - Left and Right hand side
Sold each - 2 required per car

Fits:
Porsche 914 - 1970 to 1976

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450105700

The product you are viewing cross references to these numbers

Reinforcement panel front trunk.

Fits:
Porsche 914 - 1970 to 1976

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450704

The product you are viewing cross references to these numbers

Reinforcement plate front anti roll bar..

Fits:
Porsche 914 1970-76

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450116210

The product you are viewing cross references to these numbers

Reinforcement plate front anti roll bar.

Fits:
Porsche 914 1970-76

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450116210

The product you are viewing cross references to these numbers

Spare wheel hold down bracket

Fits:
Porsche 914 - 1970 to 1976

Tow hook

Fits:
Porsche 914 - 1970 to 1976

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450153110

The product you are viewing cross references to these numbers