do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Wheel Bearings & Kits
Fits:
Porsche 924 1977-85
Porsche 944 1982-85
Click 'Zoom in' for large parts diagram.
Diagram Ref No 7.
Old Porsche part numbers:
- 113501277A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
113501277B
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 944 2.5L 8V 1982-87
Shop Securely
12 Month Warranty
Worldwide Delivery
Weight 920 g
Outer diameter 80 mm
Width 42 mm
Fits:
Porsche 911 1974-89 (not Turbo) REAR
Porsche 944 1985-91 REAR
Porsche 968 1992-95 REAR
Please Note - It is recommended to replace the hub nut as this is a use once only item.
Please check vehicle details closely in the "You may also like" options in the Basket
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905302001
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Weight 920 g
Outer diameter 80 mm
Width 42 mm
Fits:
Porsche 911 1974-89 (not Turbo) REAR
Porsche 944 1985-91 REAR
Porsche 968 1992-95 REAR
Please Note - It is recommended to replace the hub nut as this is a use once only item.
Diagram Ref No 7Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905302001
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche 928 1986-95 (not S4) FRONT
Porsche 944 1987-91 FRONT
Porsche 968 1992-95 FRONT
Diagram Ref No 5.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905908901
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche 928 1986-95 (not S4) FRONT
Porsche 944 1987-91 FRONT
Porsche 968 1992-95 FRONT
Diagram Ref No 5.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905908901
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Rear Wheel Bearing is a precision-engineered replacement component designed to support the rear wheel hub assembly while allowing smooth, low-friction wheel rotation. Manufactured to OE specifications for fit, performance and durability, this wheel bearing is essential for maintaining vehicle stability, ride comfort and safe operation.
Please Note: - It is recommended to replace the hub nut as this is a use once only item.
Fits:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Diagram Ref No 7
Constructed from high-quality hardened steel with precision-machined bearing races and rolling elements, the rear wheel bearing is designed to withstand the substantial radial and axial loads generated during acceleration, braking and cornering. It provides accurate wheel alignment and smooth rotation while helping to minimise friction and wear throughout the rear suspension and drivetrain system.
What This Product Does:
- Supports the rear wheel hub assembly.
- Allows smooth and efficient wheel rotation.
- Reduces friction between moving wheel components.
- Maintains correct wheel alignment and positioning.
- Supports vehicle stability during cornering and braking.
- Helps ensure precise handling characteristics.
- Carries radial and axial loads generated during driving.
- Contributes to safe and reliable vehicle operation.
Symptoms Of Wear Or Failure:
- Humming, rumbling or growling noises from the rear wheel area.
- Noise that increases with vehicle speed.
- Excessive wheel play or looseness.
- Vibration felt through the vehicle.
- Uneven tyre wear.
- Reduced handling stability.
- Wheel hub overheating.
- ABS warning lights in some applications where the bearing incorporates a sensor ring.
- Rough wheel rotation during inspection.
- Severe bearing failure causing wheel instability.
Why Replacement Matters:
- Rear wheel bearings are subjected to constant rotational loads, road impacts, moisture, dirt and temperature fluctuations throughout their service life. Over time, bearing surfaces can wear, lubrication can degrade and contamination may enter the bearing assembly, reducing performance and reliability.
- A worn wheel bearing can compromise vehicle handling, generate excessive noise and place additional stress on the wheel hub, suspension and braking components. If left unresolved, severe bearing wear may result in wheel misalignment, damage to surrounding components or, in extreme cases, loss of wheel support.
- Replacing a worn rear wheel bearing restores smooth wheel operation, improves vehicle stability and helps maintain safe driving characteristics. An OE Match replacement provides factory-style fitment, precision manufacturing and long-term durability, ensuring reliable performance and preserving the handling and safety standards expected from your Porsche.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905302001
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche Wheel Bearings & Kits | Design911 Suspension Components for Smooth Rotation, Precision & Safety
Wheel bearings are critical components within your Porsche’s suspension and axle assembly, ensuring smooth, friction-free rotation of the wheels. They support the vehicle’s weight while allowing the wheels to spin precisely and quietly at high speeds. Properly functioning bearings contribute to stability, ride comfort, and predictable handling — all essential for maintaining the performance and safety your Porsche is known for.
At Design911, we supply a complete selection of wheel bearings and bearing kits, engineered for precision fitment, strength, and longevity. Each bearing set is crafted from premium-grade materials and designed to meet the high-performance demands of both classic and modern Porsche models. Whether for routine maintenance, performance upgrades, or full restoration, our range ensures your Porsche delivers a quiet, stable, and confident ride.
What Do Wheel Bearings Do?
Wheel bearings enable the wheels to rotate smoothly around the hub while supporting vertical and lateral loads.
Core Functions:
• Allow free and precise wheel rotation with minimal friction.
• Support vehicle weight while maintaining wheel alignment.
• Reduce vibration, noise, and rolling resistance.
• Enhance cornering stability and braking performance.
• Protect suspension and hub components from excessive wear.
High-quality bearings ensure quiet operation and smooth performance, providing the secure, agile driving dynamics that Porsche drivers demand.
Why Do Wheel Bearings Fail or Degrade?
Wheel bearings operate under high load, temperature, and rotational stress — eventually leading to wear or damage.
Common Causes of Failure Include:
• Contamination from water, dirt, or road debris.
• Loss of lubrication or grease degradation.
• Corrosion or pitting of the bearing races.
• Impact damage from potholes or kerbs.
• Wear due to age or improper installation torque.
When wheel bearings fail, symptoms can include humming noises, vibration, wheel play, or uneven tyre wear — all of which reduce handling precision and driving safety.
Why Replace or Upgrade Your Porsche Wheel Bearings?
Replacing worn wheel bearings restores smooth, quiet operation and ensures stable, predictable handling. Upgraded bearing kits offer increased durability for high-performance or track-driven vehicles.
Key Benefits:
• Eliminates vibration, wheel play, and noise.
• Restores precise steering and suspension stability.
• Improves safety, grip, and cornering confidence.
• Available as complete front or rear bearing kits for Porsche models.
• Fits Porsche 911, 944, 968, Boxster, Cayman, Cayenne, Panamera, and Macan.
• Ideal for maintenance, restorations, or high-performance upgrades.
Design911’s Porsche wheel bearings and kits are engineered for accuracy, durability, and performance — ensuring your Porsche runs as smooth and stable as the day it left the assembly line.
Highlights
• Premium Porsche wheel bearings and complete bearing kits.
• Precision-engineered for quiet, friction-free rotation.
• Restores handling, steering accuracy, and ride comfort.
• Manufactured from high-strength, wear-resistant materials.
• Suitable for both classic and modern Porsche models.
• Perfect for servicing, performance tuning, or full restorations.
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Ball Joints
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Shock Absorber Parts REAR
-
Coil Springs FRONT
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Hub Nut
-
Wishbones & bushes
-
Torsion Bar
-
Spring Plate
-
Rear Trailing Arm
-
Cross Member & Parts
-
Wheel Hub / Carrier
-
SuperPro Polyurethane Bushes
-
Powerflex Heritage Collection
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed