Please wait… 
Please wait while we process your order,
do not press the back button… 
Design911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk Facebook Instagram
Porsche specialists based in the UK
Porsche > 992 (911) MK1 2019-2024 > Brakes >

Brake Pads & Disc Package

Brake Pads & Disc Package

Refine by Car Type
Filter by brand
DISPLAYING 17 to 18 (of 18 products)
1 2
Rear Brake Pad And Brake Disc Package. Porsche 992.1 C2 / C4 2019-24 By SHW - 992698451G, 9P1615601, 9P1615602, 9P1907637A
2
Rear Brake Pad And Brake Disc Package. Porsche 992.1 C2 / C4 2019-24 By SHW
BRAKEKIT992.1.R.SWH
Product Information
Product Information

Rear Brake Pad And Brake Disc Package, For Cars With Comfort Equipment.
Restore balanced and factory-correct rear braking performance on your Porsche 911 (992 generation) equipped with the standard “Comfort Equipment” steel-rotor braking system.

rear

Fits:

  • Porsche 992.1 Carrera 2 3.0L 2019-24
  • Porsche 992.1 Carrera 4 3.0L 2019-24
  • Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
  • Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
  • Porsche 992.1 Targa 4 3.0L 2020-24
Cars With Option Codes:
A8C - Comfort Equipment

Diagram Ref No 1, 6, 7

What The Components Do:
  • Brake Pads (Rear): These provide the friction material pressed by the calipers onto the rotor to slow the vehicle. Good rear pads ensure stable and balanced braking, prevent drag, maintain adequate stopping power and avoid overheating.
  • Brake Discs / Rotors (Rear): These are the rotating surfaces that the pads clamp onto. They convert kinetic energy into heat. Rear rotors must maintain correct thickness, flatness, no warping, and surface integrity for optimal performance and brake balance.
  • Wear Sensor: The sensor monitors pad thickness and triggers a warning when pads are worn out. Using the correct sensor ensures you receive proper maintenance alerts and helps avoid damage to rotors from pads worn down too far.

Signs Of Needing Replacement:
  • Reduced braking performance (especially at the rear): longer stopping distances, brake fade, or a “soft” pedal can indicate pads or rotors worn.
  • Brake vibration, judder or pulsing from the rear wheels upon braking — can indicate warped rotors or uneven pad/rotor surface contact.
  • Brake noise: squealing, screeching, or grinding may mean pads are worn, or that rotor damage is present.
  • Pad wear beyond safe limit: If the wear sensor triggers or manual inspection shows thin pads, you should replace — continuing to drive is risky.
  • Rotor thickness below minimum or visible damage (grooves, cracks, discoloration) — the rotors need replacing in that case.

Why Replacement Matter
  • Safety and braking performance: The brake system is one of the most safety-critical components of your car. Over time, brake pads wear thin and rotors lose their optimal surface thickness. When this happens, stopping distances increase, and braking response becomes less predictable. Replacing them restores the precise, powerful braking performance Porsche engineers intended.
  • Proper brake balance: In a Porsche 911 (992), the rear brakes play a major role in stability and weight transfer during deceleration. If rear pads or discs are worn unevenly, it disrupts front-to-rear brake balance, which can affect traction and handling, especially during spirited driving or wet-road braking.
  • Preventing damage to other components: Worn pads can expose the metal backing plate, which grinds directly into the rotor surface, scoring or cracking the disc. Likewise, a warped or corroded disc can cause accelerated pad wear. Replacing both pads and rotors together prevents these chain-reaction failures and avoids the cost of premature part replacements later.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT992.1.R.SWH
992698451G
9P1615601
9P1615602
9P1907637A

The product you are viewing cross references to these numbers
Textar Brake Cleaner removing oil, grease and dirt 500ml - 96000100
1
Textar Brake Cleaner removing oil, grease and dirt 500ml
96000100
Product Information
Product Information
Textar Brake Cleaner removing oil, grease and dirt 500ml

textar


• brake, clutch and gear components
• starter motors and alternators
• carburetors, fuel pumps and engine components
• glass and metal surfaces before gluing

The advantages of Textar brake cleaner:
• does not destroy polystyrene
• does not contain any chlorinated solvents
• is listed with the German Federal Ministry for the EnvironmentHow to use:

Spray a thick coating on the parts to be cleaned. Allow the solvent to drip and/or evaporate. Repeat if necessary.



Find out about Textar product verification here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96000100
96000100

The product you are viewing cross references to these numbers
DISPLAYING 17 to 18 (of 18 products)
1 2
Also found on these pages
About Brake Pads & Disc Package

Maintain Porsche’s world-class stopping power with genuine Porsche and aftermarket standard brake pad & disc packages from Design911. These braking kits are engineered to deliver consistent, smooth, and safe braking performance, preserving the handling precision and control your Porsche was built for.

Each package includes matched brake discs (rotors) and pads, ensuring optimal friction balance, even wear, and reduced brake fade. Manufactured to OEM specifications or higher, these components are built from high-grade materials such as carbon composite, ceramic, or cast iron — ensuring strength, reliability, and longevity under everyday driving conditions.

Whether you’re replacing worn components on a 911, Boxster, Cayman, Cayenne, or Taycan, Design911 offers a comprehensive selection of genuine Porsche brake packages and high-quality aftermarket options to suit every driving style and budget.

Choose from Genuine Porsche or Aftermarket brands for standard, brake kits for daily driving, all designed to maintain your Porsche’s exceptional stopping performance.

Genuine Porsche Brake Pad & Disc Packages
Factory-original Porsche brake kits designed for perfect compatibility, consistent performance, and OEM-level safety and durability.

Aftermarket Replacement Brake Packages
High-quality aftermarket brake kits that match or exceed OEM performance — ideal for maintenance, upgrades, or cost-effective replacements.

Front Brake Pad & Disc Packages
Matched front axle kits delivering optimal braking balance, reduced vibration, and enhanced fade resistance.

Rear Brake Pad & Disc Packages
Precision-engineered rear braking kits ensuring even wear, consistent pressure, and smooth operation under all conditions.

Standard Road Brake Kits
Designed for everyday road use — providing quiet, smooth braking with OEM reliability and low brake dust output.

Classic Porsche Brake Packages
Authentic reproduction brake kits for classic Porsche models such as the 356, 911 Classic, 912, and 964 — perfect for restoration and preservation projects.

You may also like
Popular Models