Exhaust Tail Pipes
Fits:
Porsche 911 GT3 (991) 2014 - 2017
Porsche 911 GT3/RS (997 FL) 3.8 2009 - 2012
Porsche 911 GT3/RS (997 FL) 4.0 2011 - 2012
Porsche 911 GT3/RS (997) 3.6 2006 - 2009
Finish the system with a pair of eye-catching double round tailpipes, made of high - grade titanium.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TP-PO997GT3H
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished stainless steel polished for a show car shine. Each pipe is 85mm double angle mitre cut.
Fits:
Porsche 997 GT3
Porsche 997 GT3RS
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409704
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished TITANUIM polished for a show car shine. Each pipe is 85mm double angle mitre cut.
The Advantages:
Titanium has the combined properties of being light and strong, It is also corrosive resistant and can withstand high temperatures.
Fits:
Porsche 997 GT3
Porsche 997 GT3RS
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409701
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Porsche 997 GT3 and GT3 RS
Fits
997 Gen 1
Porsche 911 GT3
Porsche 911 GT3 RS
Porsche 911 GT3 4.0Ltr
997 Gen 2
Porsche 911 GT3
Porsche 911 GT3 RS
This product can be mounted all GT3, GT3 RS, GT3 RS 4.0 versions, both on MK1 and on MK2 car models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPOGT3.023.AC
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Fits
997 Gen 1
Porsche 911 GT3
Porsche 911 GT3 RS
Porsche 911 GT3 4.0Ltr
997 Gen 2
Porsche 911 GT3
Porsche 911 GT3 RS
This product can be mounted all GT3, GT3 RS, GT3 RS 4.0 versions, both on MK1 and on MK2 car models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPOGT3.023.A
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Available in black or clear
Outer diameter is 90mm
Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Extremely light weight and strong, this titanium GT3 style exhaust tip is perfect for your
modern GT3/RS or custom air-cooled project.
45% lighter than stainless steel, they weigh 825 grams saving significant weight at the rear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-EX-01
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS
Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.
The kit includes 3x titanium flange nuts and 3 correct washers (two off-centered, and a standard washer).
Lighter than steel, they will not corrode and look good indefinitely.
The black nuts and washers are black titanium nitride coated, the silver, raw titanium.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-EX-02
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS
Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.
The kit includes 3x titanium flange nuts, 3 correct washers (two off-centered, and a standard washer) and 3 x bolts to install the exhaust tips when using a center muffler bypass exhaust. Bolts are raw titanium.
Lighter than steel, they will not corrode and look good indefinitely.
The black nuts and washers are black titanium nitride coated, the silver, raw titanium.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-EX-03
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Sport Silencers / Mufflers
- Switchable Silencers / Mufflers
- All Silencers / Mufflers
- Catalyst / Bypass
- Manifold / Headers
- Heat Exchangers
- Exhaust Package
- Exhaust Gaskets
- Exhaust Nuts / Bolts / Studs
- Brackets / Clamps / Straps
- Exhaust Fitting Kits
- Sport Exhaust Vacuum Parts
- Fabspeed Exhaust
- Lambda Sensors / Probes
- Lambda Sensor Extensions