Wings Rear & Parts

Rear 1/4 Panel

Fits:
Porsche 986 Boxster 1997-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650396

The product you are viewing cross references to these numbers

Rear 1/4 Air Vent - Grille.
Left or right side

Fits:
Porsche 986 Boxster 1997-04

Click picture for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650474

The product you are viewing cross references to these numbers

Rear indicator frame housing.

Fits:
Porsche 986.1 Boxster 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750216

The product you are viewing cross references to these numbers

Wing rear air vent grille, Black.

Fits:
Porsche 987.2 Boxster S 2009-12 Black Edition

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750456

The product you are viewing cross references to these numbers

This genuine Porsche gasket is used with the engine-compartment air duct on 986 Boxster models from 1997–2004. It forms part of the engine ventilation arrangement within the rear bodywork.

Fits

• Porsche Boxster 986 2.5L 1997–99
• Porsche Boxster 986 2.7L 1999–02
• Porsche Boxster S 986 3.2L 1999–02
• Porsche Boxster 986 2.7L 2003–04
• Porsche Boxster S 986 3.2L 2003–04

Diagram Ref No 5

What This Product Does

The gasket sits at the air-duct joint, closing the gap between the associated ventilation components and helping the duct remain correctly located. It is intended to maintain the original sealing arrangement around this connection.

Functions

• Seals the corresponding air-duct joint
• Reduces unintended airflow through gaps around the connection
• Supports correct positioning of the adjoining duct parts
• Provides a replaceable interface between ventilation components

Technical Details

• Part number: 98657565500
• Product type: gasket for air duct
• Brand: genuine Porsche
• Assembly: engine-compartment ventilation
• Diagram quantity: 1
• Catalogue weight: 0.0075 kg

Symptoms of Fault

• Cracked, torn or missing gasket material
• Permanent flattening or distortion
• A visible gap around the duct connection
• Loose or uneven seating of the adjoining air duct
• Evidence of air or debris passing around the joint

Why Replacement Matters

Replacing a deteriorated gasket restores the intended contact between the air-duct components. Renewal should also be considered when dismantling the surrounding ventilation assembly if the original gasket has hardened, torn or no longer returns to its correct shape.

FAQs

• Where is this gasket fitted?
  It is listed within the engine-compartment ventilation assembly for the Porsche 986 Boxster.
• How many gaskets are shown for this application?
  The exploded-diagram information specifies a quantity of one.
• When should it be replaced?
  Replace it if it is split, distorted, excessively compressed or missing, or if it cannot be reseated correctly after duct removal.
• Is this a genuine Porsche component?
  Yes, part number 98657565500 is a genuine Porsche air-duct gasket.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98657565500

The product you are viewing cross references to these numbers

This Porsche air inlet gasket seals the air inlet joint within the side-section bodywork assembly. It is suitable for the Porsche 986 Boxster and Boxster S applications listed below.

Fits:

• Porsche Boxster 986 2.5L 1997–99
• Porsche Boxster 986 2.7L 1999–02
• Porsche Boxster S 986 3.2L 1999–02
• Porsche Boxster 986 2.7L 2003–04
• Porsche Boxster S 986 3.2L 2003–04

Diagram Ref No 10

Check fitment for your specific vehicle (model, year, engine) before ordering.

Required Quantity
The 986 Boxster side-section air-inlet installation requires 2 gaskets.

What Is This Part?
This gasket forms the sealing interface where the air inlet meets the surrounding side-section bodywork. It sits between the mating surfaces and needs to remain intact and evenly seated when the inlet is installed. Its condition is particularly relevant during inlet removal, side-section repairs or bodywork refurbishment, when an existing gasket may be disturbed. Before reassembly, check that the gasket follows the joint without folds, tears or displaced sections.

What Does This Part Do?

• Seals the inlet joint: Closes the interface between the air inlet and its mating surface in the side-section assembly.
• Maintains contact around the joint: Provides a continuous sealing interface when correctly positioned and seated.
• Supports correct reassembly: Replaces a damaged or deteriorated sealing interface when the inlet is refitted after bodywork repairs.

Why Replace This Part?
A split, distorted or permanently flattened gasket may no longer contact its mating surfaces evenly. Missing sections or folds can leave gaps at the joint, even when the inlet itself is correctly positioned. Removal can also damage an otherwise serviceable gasket if it sticks to the surrounding parts or is pulled out of shape.

Inspect the gasket whenever the inlet is disturbed, rather than assuming that removal alone makes replacement necessary. Renew it if it cannot be refitted intact and seated evenly. Check the inlet, surrounding bodywork and retaining hardware at the same time: poor alignment or loose fittings should be corrected rather than relying on a new gasket to compensate.

When to Replace This Part?

• Visible damage: Tears, splits or missing sections interrupt the sealing surface.
• Permanent deformation: Flattened, folded or distorted areas prevent the gasket from sitting evenly.
• Poor seating: Gaps remain at the joint after the inlet and its mating surfaces have been checked for correct alignment.
• Removal damage: The gasket tears, stretches out of shape or loses sections during inlet removal or side-section repair.

Where Is This Part Fitted?
Location: At the air inlet joint within the rear side-section bodywork assembly of the Porsche 986 Boxster, between the inlet and its mating surface.

Product Summary

• Product: Air inlet gasket.
• Brand: Porsche.
• Part number: 98650490700.
• Fitted location: Rear side-section air inlet joint.
• Purpose: Seals the air inlet interface within the side-section bodywork assembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650490700

The product you are viewing cross references to these numbers

Cooling Fan On Rear 1/4 Vent.

Fits:

Porsche 986 Boxster 1997>>2004

Diagram Ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98762405001

The product you are viewing cross references to these numbers

Drain strainer / water filter. 

Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756148700

The product you are viewing cross references to these numbers

Engine Cooling Fan.

Fits:
Porsche 987 Boxster MKII 2009>>2012
Porsche 987C Cayman MKII 2009>>2012

Diagram Ref No 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98762405001

The product you are viewing cross references to these numbers

Plastic frame - Satin Black - for the vent located on the rear wing.

Fits:
Porsche 987-2 Boxster Spyder 2011-12

Diagram ref. 2.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875047

The product you are viewing cross references to these numbers

Grille - finished in Titanium Metallic - for the vent located on the rear wing. 

Fits:
Porsche 987-2 Boxster Spyder 2011-12

Diagram ref. 1.

NOTE: Our product image shows the right-side grille. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750456

The product you are viewing cross references to these numbers

Impact absorber plate rear 1/4 vent. Left.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12
Porsche 987C.1 Cayman 2006-08
Porsche 987C.2 Cayman 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98757564701

The product you are viewing cross references to these numbers

Metal mounting frame for the left-side air duct on the rear wing. 

Fits:
Porsche 987 Boxster / S 2005-12
Porsche 987 Cayman / S 2006-12

Diagram ref. 9.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98757575900

The product you are viewing cross references to these numbers

Rear 1/4 air vent - outer.

Fits:
Porsche 986 Boxster 1997 - 2002

Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650456

The product you are viewing cross references to these numbers

Rear 1/4 inner wing.

Fits:
Porsche 986 Boxster 1997-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650208

The product you are viewing cross references to these numbers

Rear 1/4 wing panel. primed.

Fits:
Porsche 987.2 Boxster 2009-12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750396

The product you are viewing cross references to these numbers