Undertrays Chassis & Engine

Centre tunnel tray.

Fits:
Porsche 996 1998-05
Porsche 986 Boxster 1997-04

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99650404302

The product you are viewing cross references to these numbers

Centre Undertray.
Restore the under-body protection and aerodynamic integrity of your Porsche with this genuine centre undertray. Designed for models such as the 911 (997) & Boxster/Cayman (987) 2005-13, this under-body panel covers the mid-section underside of the vehicle, providing enhanced acoustic suppression, improved airflow and vital protection for under-car components.

Fits:

• Porsche Boxster 987 2.7L 2005 -08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche Boxster 987 MKII 2.9L 2009-2012
• Porsche Boxster S 987 MKII 3.4L 2009-2012
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08
• Porsche Cayman 2.9L 987C MKII 2009-12
• Porsche Cayman S / R 3.4L 987C MKII 2009-12
• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII GT3 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13

Diagram Ref No 3

What This Product Does:

• The centre undertray (or belly pan) is a large panel mounted underneath the vehicle, typically in the under-body centre section. Its functions include:
• Noise/Vibration/Harshness) reduction: by covering the underbody it helps reduce road noise and wind noise in the cabin.
  
• Aerodynamic improvement and underbody protection: providing a smoother underside, it helps reduce drag and aids airflow beneath the vehicle.
  
• Protection of vital components: the undertray shields components on the underside from road debris, water spray, and minor impacts (curbs, debris) that might otherwise damage suspension, exhaust, plumbing.
  
• In effect, it is a functional body-panel that sits beneath the car’s mid/centre section, helping the car perform better, stay quieter and better protected.

Symptoms & Signs You May Need Replacement:

• Visible damage, cracks, missing sections or broken fasteners — due to scuffs against curbs, underbody impacts, or age-related degradation.
  
• Underbody noise increase or vibration — if the undertray is loose, missing or damaged the underbody acoustic performance may suffer.
  
• Increased drag or wind noise — if the panel is warped or detached in spots, you may notice more wind howl or lowered top-speed performance (especially in performance cars).
  
• Exposure of components — if you see components normally covered (e.g., plumbing, wiring, underside of the engine/transmission) then the undertray may be missing or removed.
  
  

Why Replacement Matters:

• Improves drivability & comfort: A sound underbody panel improves the feel inside the cabin, reducing wind/road noise and helping the car feel more refined.
  
• Maintains aerodynamic efficiency: Especially on high-performance Porsche models, having the underbody panel in place helps maintain the designed airflow and downforce characteristics.
  
• Protects underbody equipment: Without the undertray you risk stone strikes, water spray and debris hitting vulnerable components (fuel lines, oil lines, exhaust) directly.
  
• Avoids costly damage: A thrown stone or curb contact could damage a part that otherwise the undertray shielded; replacing soon means fewer downstream issues.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99750404300

The product you are viewing cross references to these numbers

Centre undertray.

Fits:
Porsche 991.1 2012-16
Porsche 991.2  2017-19
Porsche 991 Turbo 2014-20
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C (718C) Cayman 2017>>

Diagram ref no 4
PLEASE NOTE:
Due to its size, weight or fragility, this item requires additional protective packaging to make sure it reaches you undamaged. A small packing surcharge is applied to cover these specialist materials and the extra care taken preparing your order for transit.

Centre undertray.

Fits:
Porsche 991.1 2012-16
Porsche 991.2  2017-19
Porsche 991 Turbo 2014-20
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C (718C) Cayman 2017>>

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460300

The product you are viewing cross references to these numbers
PLEASE NOTE:
Due to its size, weight or fragility, this item requires additional protective packaging to make sure it reaches you undamaged. A small packing surcharge is applied to cover these specialist materials and the extra care taken preparing your order for transit.

Engine Heat Shield


Fits:
Porsche 986 Boxster 1997-04

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650460502

The product you are viewing cross references to these numbers

Front undertray cover.


Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460109

The product you are viewing cross references to these numbers

Front undertray cover.


Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460109

The product you are viewing cross references to these numbers

Front undertray cover.

Fits:
Porsche 997.1 C2 2005-08
Porsche 997.2 C2 2009-12
Porsche 997 GT2 2007-13 *LHD cars only
Porsche 997 GT3 2007-11 *LHD cars only
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12
Porsche 987C.1 Cayman 2006-08
Porsche 987C.2 Cayman 2009-12

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99750452702

The product you are viewing cross references to these numbers

Metal Clamp for Front Axle C2 Tray
This original Porsche retaining clamp is used to secure the front undertray / front axle tray panel, helping keep the underbody covering correctly mounted and aligned.
Sold individually

Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1998 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 Turbo 2001 - 2005

Diagram ref no 3

This clamp is used in the front axle tray / underbody protection panel mounting system on selected Porsche 986 and 996 models.

What This Part Does / Functions
•  Secures the front axle C2 tray / undertray panel
•  Helps hold the underbody protective covering in place
•  Maintains correct undertray alignment and fitment
•  Helps prevent tray movement, vibration or rattling
•  Replaces a missing, corroded, bent or damaged original clamp
•  Supports correct reassembly after undertray removal
•  Provides OE Porsche metal clamp fitment and durability
•  Helps maintain the factory underbody panel mounting arrangement.

Why Replace This Part?
Undertray clamps are exposed to road spray, salt, dirt, heat, vibration and repeated removal during servicing. Over time, the clamp can corrode, bend, weaken or go missing. A missing or damaged clamp may allow the front axle tray to sit loose, rattle, sag or detach from its correct mounting position. Replacing it with an OE Genuine Porsche metal clamp helps restore secure undertray fitment and keeps the front underbody protection panel correctly fastened.

Common Symptoms of a Missing or Damaged Clamp
•   Loose front undertray or axle tray
•   Rattling or vibration from the front underbody area
•   Undertray panel not sitting flush
•   Missing clamp after previous service work
•   Corroded or bent clamp hardware
•   Underbody cover movement at speed
•   Poor alignment of the C2 tray panel
•   Damaged fixing point during undertray removal.

When to Replace This Part
•   When refitting the front axle tray / C2 tray
•   If the original clamp is missing, corroded, bent or damaged
•   During front undertray or underbody panel replacement
•   After front-end or underside impact damage
•   During routine servicing if undertray hardware is worn
•   When replacing broken or incorrect retaining clips
•  During restoration of the front underbody panel system

Where It Fits on the Car
This clamp fits in the front underbody / front axle tray area. It is used to retain the front axle C2 tray / underbody protective covering to the vehicle’s front underside mounting points.

Correct positioning is important to ensure the tray sits securely and does not rattle or move while driving.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950765709

The product you are viewing cross references to these numbers

Metal Clamp for Front Axle C2 Tray
OE Match metal clamp for the front axle C2 tray on Porsche 986 Boxster and 996 models. This replacement clamp helps secure the front axle tray or underbody panel correctly, supporting stable fitment and original-style underbody protection.
Sold individually

Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1998 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 Turbo 2001 - 2005

Diagram ref no 3

The metal clamp helps hold the front axle tray securely in position. Correctly fitted underbody tray hardware helps prevent rattling, looseness, panel movement, and damage to the tray or surrounding mounting points.

Functions
•  Replaces the front axle C2 tray metal clamp
•  Helps secure the front axle tray or underbody panel
•  Supports correct underbody panel alignment
•  Helps reduce rattling, vibration, and loose panel movement
•  Suitable for front tray removal, refit, repair, or restoration
•  Helps maintain original-style underbody fitment
•  OE Match replacement for Porsche underbody fixing repair.

Why Replace This Part?
Underbody fixing clamps can become corroded, bent, worn, missing, or damaged during servicing, accident repair, tray removal, or general underbody maintenance. A damaged or missing clamp may allow the tray to sit incorrectly, rattle, loosen, or detach from its mounting position. Replacing the clamp helps restore secure front axle tray fitment.

When to Replace This Part
•  Front axle tray clamp is missing, corroded, bent, or damaged
•  Front axle tray or underbody panel is loose
•  Underbody panel rattling or vibration is present
•  Tray has been removed for service or repair
•  Front underbody fixings are being refreshed
•  Accident repair or bodywork is being carried out
•  The vehicle is undergoing Porsche 986 Boxster or 996 restoration

Where it fits on the car
This clamp fits at the front axle C2 tray / front underbody tray mounting area on Porsche 986 Boxster and 996 models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950765709

The product you are viewing cross references to these numbers

Under Engine Tray Mounting Bracket

Fits:
Porsche 986 Boxster 1997-04

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650457101

The product you are viewing cross references to these numbers

Plastic Expansion rivet / trim clip

This Expansion Rivet is an OE Match fastening clip manufactured to replicate the original Porsche specification for fit, function, and durability. This push-fit plastic rivet is widely used throughout Porsche vehicles to secure lightweight components such as bumper covers, wheel arch liners, undertrays, and trim panels.

Widely used across multiple Porsche model ranges, including:
Porsche 911 (964, 993, 996, 997, 991)
Porsche Boxster & Cayman (986, 987, 981, 982)
Porsche Cayenne (955, 957)
Porsche Panamera (970)

Common applications include:
Bumper covers
Wheel arch liners
Undertrays and splash shields
Side skirts and trim panels


Ideal for both maintenance and restoration work, this OE Match rivet helps maintain factory-correct panel alignment and prevents movement, vibration, or detachment of essential trim components.

This expansion rivet provides a secure fixing point for various body and trim elements. It locks components into place by expanding within the mounting hole, ensuring panels remain properly aligned and firmly attached.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959194140

The product you are viewing cross references to these numbers

Rear Axle Protective Plate. Porsche 986 Boxster Auto

Fits:
Porsche 986 Boxster M249
Tiptronic Transmission

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98633116105

The product you are viewing cross references to these numbers

Rear Axle Protective Plate. Porsche 986 Boxster Manual

Fits:
Porsche 986 Boxster M480 / M481
M480 - 6-speed Manual Transmission
M481 - 5-th speed Manual Transmission

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98633116301

The product you are viewing cross references to these numbers

Rear Underbody Support.

Fits:
Porsche 987.1 Boxster MKI 2005>>2008

Diagram Ref No 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750457

The product you are viewing cross references to these numbers

Rubber lip.

Fits:
Porsche 986 Boxster 1997-04

Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650489

The product you are viewing cross references to these numbers