Braking
• Slender design allows pipes to be shaped in situ.
• Ideal for aluminium, brass, copper and steel pipe.
• Contoured vinyl grip handles provide extra comfort and control.
• Model No. VS0346• Twin handles provide even force for accurate pipe forming.
• Slender design allows pipes to be shaped in situ.
• Ideal for aluminium, brass, copper and steel pipe.
• Contoured vinyl grip handles provides extra comfort and control.4-in-1 Automotive Deluxe Pipe Bender
• Capable of bending brake pipes in situ.
• Bends pipe up to 90°.
• Ideal for aluminium, brass, copper and steel pipe.
• Contoured vinyl grip handle provides extra comfort and control.
• Model No. VS0345• Fast, accurate and easy-to-use pipe bender.
• Capable of bending brake pipes in situ.
• Bends pipe up to 90°.
• Ideal for aluminium, brass, copper and steel pipe.
• Contoured vinyl grip handle provides extra comfort and control.4-in-1 Automotive Pipe Bender
• Fast, lightweight and easy to use.
• Master set of adaptors suit a wide range of vehicle applications.
• Suitable for push-back and wind-back brake pistons.
• Left-handed thrust required for Citroen, Ford and Renault applications.
• Interchangeable adaptor plates with thrust bolt assembly and reaction plate.
• Includes 3/8"Sq drive adaptor and 2-pin magnetic adaptor for added flexibility.
• Kit helps prevent damage to pistons and seals.
• Applications; Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Honda, Jaguar, Lancia, Lincoln, Mazda, Mini, Mitsubishi, Nissan, Peugeot, Proton, Renault, Rover, Saab, Seat, Subaru, Toyota, Vauxhall/Opel, VW, Volvo.
• Model No. VS0286• Air operated wind back tool suitable for left or right hand wind back operations.
• Fast, lightweight and easy to use.
• Master set of adaptors suit a wide range of vehicle applications.
• Suitable for push-back and wind-back brake pistons.
• Left-handed thrust required for Citroen, Ford and Renault applications.
• Interchangeable adaptor plates with thrust bolt assembly and reaction plate.
• Includes 3/8"Sq drive adaptor and 2-pin magnetic adaptor for added flexibility.
• Kit helps prevent damage to pistons and seals.
• Supplied in carry-case.29pc Air Operated Brake Wind-Back Tool Kit
• Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage.
• Suitable for use with ABS systems.
• Supplied with range of common adaptors.
• Model No. VS0205• Fast, easy and effective bleeding of brakes and clutch using air from tyre.
• Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage.
• Suitable for use with ABS systems.
• Supplied with range of common adaptors.Automatic Brake & Clutch Bleeder
• Supplied with quick connect.
• Model No. VS820UA• Universal reservoir cap for Model No. VS820 Brake & Clutch Bleeding System.
• Supplied with quick connect.Brake & Clutch Bleeding System Universal Adaptor
• Supplied with tube and connectors.
• Model No. VS0201• Composite collection bottle with magnetic locating pad.
• Supplied with tube and connectors.Brake Bleeder Set with Container
• Suitable for the adjustment and installation of Bendix and Girling brakes.
• Supplied in case for ease of storage.
• Model No. VS0460• Chrome Vanadium steel 1/2"Sq drive sockets.
• Set contains pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.3pc 1/2"Sq Drive Brake Calliper Socket Set
• Features three alignment plates for correct alignment of the insert.
• Kit includes 7mm hex key, stepped drill, M9 tap and ten inserts in storage case.
• Model No. VS0462• Time and money saving kit for replacing damaged brake calliper threads with a new threaded insert.
• Features three alignment plates for correct alignment of the insert.
• Kit includes 7mm hex key, stepped drill, M9 tap and ten inserts in storage case.Brake Calliper Thread Repair Kit
• Model No. VS0462R• Replacement inserts for VS0462 Brake Calliper Thread Repair Kit.Brake Calliper Thread Repair Replacement Inserts Pack of 10
• Replaceable tips allow use on other circlip applications.
• Model No. VS038• Originally designed as a tool to remove the tab-type retaining clip on American GM brake cylinder assembly.
• Suitable for removal and installation of locking rings on drive shafts when removing CVJ.
• Replaceable tips allow use on other circlip applications.Brake Cylinder/CVJ Circlip Tool
• Air operated brake cleaner device can be used remotely from air supply and its recycling function prolongs the life of the brake cleaning fluid.
• Cranked neck makes this unit suitable for use under lift or next to ramps.
• Fitted with four large castor wheels for workshop mobility.
• Simple to fill and empty.
• Suitable for use with proprietary brands of brake cleaning fluid.
• Supplied with cleaning brush.
• Model No. VS2000• Reduce the chances of brake dust getting airborne and help protect you and your workforce from the effects of brake dust inhalation.
• Air operated brake cleaner device can be used remotely from air supply and its recycling function prolongs the life of the brake cleaning fluid.
• Cranked neck makes this unit suitable for use under lift or next to ramps.
• Fitted with four large castors for workshop mobility.
• Simple to fill and empty.
• Suitable for use with proprietary brands of brake cleaning fluid.
• Supplied with cleaning brush.15ltr Brake Disc & Lining Cleaner
• Floating jaw assembly enables easy removal of calliper from disc while retaining reading.
• Metric scale with 0.1mm graduations.
• Supplied in storage case.
• Model No. VS056• Stainless steel calliper suitable for accurate measurement of brake disc thickness.
• Floating jaw assembly enables easy removal of calliper from disc while retaining reading.
• Metric scale with 0.1mm graduations.
• Supplied in storage case.Brake Disc Calliper 0-50mm
• Locking pliers secure to any convenient position enabling DTI gauge to be placed against brake disc.
• Kit includes Metric calibrated DTI gauge.
• Model No. VS0290• Check for ball joint wear and brake disc run-out quickly and easily.
• Locking pliers secure to any convenient position enabling DTI gauge to be placed against brake disc.
• Kit includes Metric calibrated DTI gauge.Brake Disc Run-Out Kit
• Aids quick set-up of shoe/drum clearance prior to re-installation of drum.
• Measures drums from 165 to 292mm (6-1/2" to 11-1/2").
• Dual Imperial and Metric scale.
• Knurled locking action.
• Model No. VS040• Measures drum wear to ensure within manufacturer’s tolerance.
• Also aids quick set-up of shoe/drum clearance prior to re-installation of drum.
• Measures drums from 165 to 292mm (6-1/2" to 11-1/2").
• Dual Imperial and Metric scale.
• Knurled locking action.Brake Drum Wear Gauge
• Cam-action body mounts in bench vice for ease of use.
• Supplied with 4.75mm, 3/16", 1/4", 5/16" and 3/8" dies and 4.75mm, 3/16", 1/4", 5/16" clamp blocks for forming most popular flares.
• Optional 3/8" clamp block available.
• Supplied in carry-case.
• Model No. PFT07• Produces accurate automotive double flares on most common sizes of brake pipe.
• Cam-action body mounts in bench vice for ease of use.
• Includes dies and clamp blocks for forming most popular flares.
• Optional 3/8" clamp block available.
• Supplied in carry-case.Brake Flaring Tool - Turret Type
• Powered by the vehicle’s 12V battery and maintains system pressure using an electric pump to drive clean hydraulic fluid through a long high pressure hose to the reservoir.
• Variable pressure delivery means that vehicles with specific requirements may be bled safely.
• Pressure can be adjusted to a maximum pressure of 2bar which is suitable for most vehicles.
• Supplied with a 46mm semi-universal reservoir cap which will fit a large percentage of European manufactured vehicles from 1997 onwards.
• Model No. VS0208• Bleeds brakes first time, every time (one-man bleeding operation).
• Powered by the vehicle’s 12V battery and maintains system pressure using an electric pump to drive clean hydraulic fluid through a long high pressure hose to the reservoir.
• Variable pressure delivery means that vehicles with specific requirements may be bled safely.
• Pressure can be adjusted to a maximum pressure of 2bar which is suitable for most vehicles.
• Supplied with a 46mm semi-universal reservoir cap which will fit a large percentage of European manufactured vehicles from 1997 onwards.12V Brake Fluid Bleeder
• Check moisture content of fluid by resistance to electric current.
• Easily calibrated using virgin brake fluid.
• Model No. VS027• Comparative electrolytic type tester.
• Checks moisture content of fluid by resistance to electric current.
• Easily calibrated using new brake fluid.
• Audible test cycle with four LED read-out.
• Just insert probe and press button for immediate result.
• Buzzer sounds to warn when battery is low and needs replacing.
• Uses 9V cell (not included).Brake Fluid Tester - Electrolytic
• Supplied in carry-case with full operating instructions.
• Model No. VS0271• The approved method of testing the water content of brake fluid.
• Just 3% of moisture can lower the brake fluid boiling point by over 100°C.
• The best way to detect this small water content is to measure the boiling point of the fluid.
• The unit incorporates a heater element, an LCD display and a power lead for use on 12V DC power supplies.
• Works on DOT 3, 4 and 5.1 specification fluids.
• Supplied in carry-case with full operating instructions.Brake Fluid Tester - Boil Test
• Bends 6mm (1/4"), 8mm (5/16") and 10mm (3/8") pipe up to 90°.
• Model No. AK5055• Suitable for most automotive applications.
• Bends pipe without crushing walls.
• Will bend Ø6, Ø8 and Ø10mm (Ø1/4", Ø5/16" and Ø3/8") pipe up to 90°.3-in-1 Automotive Brake Pipe Bender
• Helps prevent damage to pistons and seals.
• Updated adaptor set suitable for wide variety of UK vehicles.
• Supplied in carry-case.
• Model No. VS0281• Precision made adaptor plates with thrust bolt assembly and reaction plate.
• Helps prevent damage to pistons and seals.
• Updated adaptor set suitable for wide variety of UK vehicles.
• Supplied in carry-case.14pc Brake Piston Wind Back Tool Kit
• Helps prevent damage to pistons and seals.
• Model No. VS028• Precision made adaptor plates with thrust bolt assembly and reaction plate.
• Helps prevent damage to pistons and seals.
• Adaptor set suitable for most UK vehicles.
• Supplied in carry-case.8pc Brake Piston Wind-Back Tool Kit
• Includes left and right-handed thrust bolt assemblies.
• Left-handed thrust bolt required for Citroen, Ford and Renault applications.
• Adaptor plates with thrust bolt assembly and reaction plate.
• Helps prevent damage to pistons and seals.
• Updated adaptor set suitable for a wide variety of UK vehicles.
• Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Honda, Jaguar, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall/Opel, VW, Volvo.
• Model No. VS0282• Suitable for push-back and wind-back brake pistons.
• Includes left and right-handed thrust bolt assemblies.
• Left-handed thrust bolt required for Citroen, Ford and Renault applications.
• Adaptor plates with thrust bolt assembly and reaction plate.
• Helps prevent damage to pistons and seals.
• Updated adaptor set suitable for a wide variety of UK vehicles.
• Supplied in carry-case.18pc Brake Piston Wind-Back Tool Kit
• Suitable for push-back and wind-back brake pistons.
• Includes left and right-handed thrust bolt assemblies.
• Left-handed thrust bolt required for Ford, Citroen and Renault applications.
• Kit helps prevent damage to pistons and seals.
• Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Honda, Jaguar, Lancia, Lincoln, Mazda, Mitsubishi, Nissan, Peugeot, Proton, Renault, Rover, Saab, Seat, Subaru, Toyota, Vauxhall/Opel, Volvo, VW.
• Model No. VS0285• Comprehensive master set of adaptors suit a wide range of vehicle applications.
• Suitable for push-back and wind-back brake pistons.
• Includes left and right-handed thrust bolt assemblies.
• Left-handed thrust bolt required for Citroen, Ford and Renault applications.
• Precision made adaptor plates with thrust bolt assembly and reaction plate.
• Kit helps prevent damage to pistons and seals.
• Supplied in carry-case.30pc Brake Piston Wind-Back Tool Kit
• Helps prevent damage to pistons and seals.
• Model No. VS0243• Left-handed thrust bolt required for Citroen, Ford and Renault applications.
• Helps prevent damage to pistons and seals.Left-Handed Brake Piston Wind-Back Tool
• Double end tool.
• Model No. VS024• Enables retraction of piston as fitted to Colette type brake callipers allowing new brake pads to be installed.
• Double end tool.Brake Piston Wind-Back Tool with Double Adaptor
• This handy set is supplied in a carry-case to keep these commonly used tools together and is ideal for the busy workshop.
• Model No. VS0353• Set contains the majority of tools required to carry out servicing/repair work on disc and drum brakes.
• This handy set is supplied in a carry-case to keep these commonly used tools together and is ideal for the busy workshop.11pc Brake Service Kit
• Chrome plated and mirror finished for corrosion resistance.
• Fits popular sizes of brake pipes and nipples.
• Model No. VS026• Hardened and tempered Chrome Vanadium steel brake spanner set.
• Chrome plated and mirror finished for corrosion resistance.
• Fits popular sizes of brake pipes and nipples.6pc Brake Service Spanner Set
• Adjusts the clearance between the brake drum and shoe.
• May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster.
• Suitable for cars and light commercials.
• Model No. VS0355• Designed for use on hydraulic braking systems.
• Adjusts the clearance between the brake drum and shoe.
• May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster.
• Suitable for cars and light commercials.Brake Shoe Adjuster
• Specifically designed for installation and removal of drum brake shoe springs.
• Model No. VS0351• Manufactured from heat treated alloy steel.
• Specifically designed for installation and removal of drum brake shoe springs.Brake Shoe Spring Hook Tool
• Also used for removal/installation of spring from anchor stud.
• Fits most cars and light commercial drums.
• Model No. VS035• Purpose made for the installation and removal of drum shoe return springs.
• Can also be used for removal/installation of spring from anchor stud.
• Suitable for most car and light commercial drum brakes.Brake Shoe Spring Pliers
• Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.
• Model No. VS054• Spring loaded pliers for easy removal of brake shoe arm.
• Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.Brake Shoe Spring Pliers
• Features large viewing cut-away to allow correct alignment of washer.
• Simple push and twist action.
• Model No. VS036• Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly.
• Features large viewing cut-away to allow correct alignment of washer.
• Simple push and twist action.Double End Brake Spring Washer Tool
• Helps prevent damage to pistons and seals.
• Special low profile design for VAG vehicles.
• Model No. VS0245• Enables retraction of the piston on rear brake callipers.
• Helps prevent damage to pistons and seals.
• Special low profile design for VAG vehicles.Brake Wind Back Tool - Low Profile - VAG
• Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose.
• Supplied with 2 brake calliper bolt retaining tags.
• Model No. VS0354• Used to hold the brake calliper away from the hub when replacing brake pads.
• Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose.
• Supplied with 2 brake calliper bolt retaining tags.2pc Calliper Support Hooks
• Adjustable nozzle enables easy and direct application of liquid exactly where it is required.
• Robust composite construction with 1ltr capacity container.
• A compatibility document is available.
• Model No. TP01• Ideal for use with some brake cleaners, detergents, traffic film remover, penetrating oils and weed killer.
• Adjustable nozzle enables easy and direct application of liquid exactly where it is required.
• Robust composite construction with 1ltr capacity container.
• A compatibility document is available.1ltr Chemical Sprayer
• Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders.
• Adjustable honing pressure and flexible drive shaft.
• Supplied in carry-case.
• Model No. VS029• Four cylinder-honing tools in one kit covering 18mm to 89mm cylinder bores.
• Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders.
• Adjustable honing pressure and flexible drive shaft.
• Supplied in carry-case.4-in-1 Cylinder Hone Kit
• Model No. VS0222• Cylinder hone stone set - Fine 3 x 1-1/8".Cylinder Hone Stone Set 3 x 1-1/8" Fine
• Model No. VS0221• Cylinder hone stone set - Medium 3 x 1-1/8".Cylinder Hone Stone Set 3 x 1-1/8" Medium
• Fitted with 28.5mm (1-1/8") medium grade stones with adjustable capacity from Ø25-64mm.
• Suitable for small and medium sized brake cylinders.
• Model No. VS023• Flexible drive shaft and adjustable cutting control.
• Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø25-64mm.
• Suitable for small and medium sized brake cylinders.Triple Leg Cylinder Hone