Crankcase Parts

Crankcase flange gasket (metal).



Fits:
Porsche 958 Cayenne 3.0L Diesel 2014-18
Porsche 970 Panamera 3.0L Diesel 2014-16
Porsche 95B Macan 3.0 Diesel 2014-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810116103

The product you are viewing cross references to these numbers

Crankcase flange gasket (metal).

Fits:
Porsche 958 Cayenne 3.0L Diesel 2014-18
Porsche 970 Panamera 3.0L Diesel 2014-16
Porsche 95B Macan 3.0 Diesel 2014-18

Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810116103

The product you are viewing cross references to these numbers

Crankcase Housing Cap Closure Connector Union.

Fits:
Porsche Cayenne 92A (958) 2011>>2018 3.0L Diesel
Porsche Macan 95B MKI 2014>>2018 3.0L Diesel

Cars With Engine Codes:
CRCA / CRCB / CNRB / CVVA / CVVB / CVVC / CDUD / CTBA / CTBB / CTBC

Diagram Ref No 21




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95811033510

The product you are viewing cross references to these numbers

Crankshaft oil seal. 45 x 60 x 8.



Fits:
Porsche 95B.1 Macan 2.0L 2014-18
Porsche 95B.2 Macan 2.0L 2019-21 T2G
Porsche 95B.3 Macan 2.0L 2012>> T2G
Porsche 9YA Cayenne 2.0L 2017>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC103085

The product you are viewing cross references to these numbers

Crankshaft seal with flange.
This is a genuine OE crankshaft seal used in modern Porsche engines. It is designed to seal the crankshaft at the rear of the engine block, preventing oil leaks while allowing the crankshaft to rotate freely.

Fits:
Porsche 95B.1 Macan 2.0L 2015 - 2018

Porsche 95B.2 Macan 2.0L 2019 - 2021
Porsche 95B.3 Macan 2.0L 2022>>
* option code: T2G -  4-cylinder SI engine 2.0 l unit 06L.D

Porsche 9YA Cayenne 2.0L 01/2017 - 05/2023
* engine code: DFKA / DFK

Diagram ref no 16

What this product does:
• Provides a tight seal around the crankshaft flange
• Prevents engine oil leaks that could reduce lubrication or cause damage
• Maintains proper oil pressure and long-term engine performance

Location: Rear of the engine, surrounding the crankshaft flange, positioned before the flywheel or flexplate

Over time, crankshaft seals can wear out, harden, or crack due to constant rotation, oil exposure, and engine heat. Failure may result in:
• Oil leaks at the rear of the engine Reduced lubrication and risk of internal engine wear
• Oil contamination of clutch or transmission components

Replacing seal ensures proper sealing, protects against costly oil leaks, and keeps your Porsche engine performing as designed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A7103171

The product you are viewing cross references to these numbers

Crankshaft seal with flange.

Fits:
Porsche 95B.1 Macan 2.0L 2015 - 2018

Porsche 95B.2 Macan 2.0L 2019 - 2021
Porsche 95B.3 Macan 2.0L 2022>>
* option code: T2G -  4-cylinder SI engine 2.0 l unit 06L.D

Porsche 9YA Cayenne 2.0L 01/2017 - 05/2023
* engine code: DFKA / DFK

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A7103171

The product you are viewing cross references to these numbers

Crankshaft seal with flange.
The crankshaft seal with flange is a direct replacement for Porsche Macan (95B) and Cayenne (9YA) models. Mounted at the rear of the engine around the crankshaft flange, it prevents oil leaks while allowing smooth crankshaft rotation. Built to OE specifications, it ensures reliable sealing, durability, and long-term engine protection.

Fits:
Porsche 95B.1 Macan 2.0L 2015 - 2018

Porsche 95B.2 Macan 2.0L 2019 - 2021
Porsche 95B.3 Macan 2.0L 2022>>
* option code: T2G -  4-cylinder SI engine 2.0 l unit 06L.D

Porsche 9YA Cayenne 2.0L 01/2017 - 05/2023
* engine code: DFKA / DFK

Diagram ref no 16

The crankshaft seal with flange prevents engine oil from leaking where the crankshaft exits the rear of the engine block. It works under constant rotation and oil pressure, ensuring the engine remains properly lubricated without losing oil to the outside environment.

Location: Rear of the engine, behind the flywheel/flexplate at the crankshaft flange
Function in system: Works together with the crankshaft and oil pan system to contain oil and maintain internal engine pressure

Over time, crankshaft seals wear out due to heat, oil exposure, and constant motion.
A failing seal can cause:
• Visible oil leaks at the rear of the engine
• Oil contamination of clutch or torque converter components
• Loss of oil pressure and increased risk of engine damage

Replacing restores a secure seal, prevents costly oil leaks, and ensures your Porsche engine remains properly protected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A7103171

The product you are viewing cross references to these numbers

Crankshaft thrust washer set. 
Set of four thrust washers - 2 x upper, 2 x lower



Fits:
Porsche 957 Cayenne Diesel - 2007 to 2010

Porsche 958 Cayenne Diesel V6 3.0ltr - 2010 to 2017
Porsche 958 Cayenne Diesel V8 4.2ltr - 2010 to 2017
Porsche 958 Cayenne S Hybrid V6 3.0ltr - 2010 to 2017
Porsche 970.1 Panamera Diesel V6 3.0ltr - 2009 to 2013
Porsche 970.1 Panamera Hybrid V6 3.0ltr - 2009 to 2013
Porsche 970.2 Panamera Diesel V6 3.0ltr - 2014 to 2016
Porsche 970.2 Panamera S E-Hybrid V6 3.0ltr - 2014 to 2016
Porsche 95B Macan S Diesel - 2014 to 2018

For engine codes
957 Cayenne - 059D
958 Cayenne - 059E / CRCA / CRCB / CNRB / CVVA / CVVB / CVVC / 06EC / CGEA / CGE / CGFA / CUDB / CUDC 
970 Panamera - CRCC / CRCB / CWJA / CGEA / CGE / CGFA
95B Macan - CDUD / CTBA / CTBB / CTBC

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510290200

The product you are viewing cross references to these numbers

Engine Control Valve.
The Porsche Engine Control Valve is a genuine engine management component designed to regulate and control the flow of air, vacuum or engine gases within specific engine systems. Engineered to Porsche's exact specifications for precision, reliability and durability, this control valve plays a critical role in maintaining optimal engine performance, efficiency and emissions control.  

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 41

Integrated into the engine management system, the control valve operates in conjunction with the engine control unit (ECU), responding to varying engine loads, temperatures and operating conditions. Manufactured from high-quality materials and designed to withstand the demanding environment of the engine bay, it ensures accurate control and consistent performance throughout its service life.  

What This Product Does:

• Regulates the flow of air, vacuum or engine gases within the engine management system.
• Supports efficient engine operation under varying driving conditions.
• Works in conjunction with the ECU for precise engine control.
• Helps optimise fuel efficiency and emissions performance.
• Contributes to smooth engine operation and drivability.
• Supports correct operation of associated engine systems.
• Helps maintain manufacturer-specified performance characteristics.
• Assists in meeting emissions and environmental requirements.

Symptoms Of Wear Or Failure:

• Illuminated engine management or check engine warning light.
• Rough idle or unstable engine speed.
• Reduced engine performance.
• Hesitation during acceleration.
• Poor fuel economy.
• Increased exhaust emissions.
• Intermittent drivability issues.
• Fault codes relating to engine management systems.
• Engine stalling in severe cases.
• Abnormal noises from the valve or associated system.

Why Replacement Matters:

• Engine control valves operate continuously and are exposed to heat, vibration, oil vapours, carbon deposits and changing pressure conditions. Over time, internal mechanisms can become contaminated, worn or electrically faulty, reducing the valve's ability to accurately regulate flow.
• A malfunctioning control valve can affect engine performance, fuel consumption, emissions output and overall drivability. Continued operation with a faulty valve may place additional strain on related engine management components and could result in more extensive diagnostic and repair work if left unresolved.
• Replacing a defective engine control valve restores proper system operation, improves engine efficiency and helps maintain smooth, reliable performance. A genuine Porsche replacement ensures precise fitment, correct calibration and long-term durability, preserving the performance, efficiency and reliability expected from your Porsche engine.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810724331

The product you are viewing cross references to these numbers

Engine Control Valve.
The Porsche Engine Control Valve is a OE MATCH engine management component designed to regulate and control the flow of air, vacuum or engine gases within specific engine systems. This control valve plays a critical role in maintaining optimal engine performance, efficiency and emissions control.  

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 41

Integrated into the engine management system, the control valve operates in conjunction with the engine control unit (ECU), responding to varying engine loads, temperatures and operating conditions. It ensures accurate control and consistent performance throughout its service life.  

What This Product Does:

• Regulates the flow of air, vacuum or engine gases within the engine management system.
• Supports efficient engine operation under varying driving conditions.
• Works in conjunction with the ECU for precise engine control.
• Helps optimise fuel efficiency and emissions performance.
• Contributes to smooth engine operation and drivability.
• Supports correct operation of associated engine systems.
• Helps maintain manufacturer-specified performance characteristics.
• Assists in meeting emissions and environmental requirements.

Symptoms Of Wear Or Failure:

• Illuminated engine management or check engine warning light.
• Rough idle or unstable engine speed.
• Reduced engine performance.
• Hesitation during acceleration.
• Poor fuel economy.
• Increased exhaust emissions.
• Intermittent drivability issues.
• Fault codes relating to engine management systems.
• Engine stalling in severe cases.
• Abnormal noises from the valve or associated system.

Why Replacement Matters:

• Engine control valves operate continuously and are exposed to heat, vibration, oil vapours, carbon deposits and changing pressure conditions. Over time, internal mechanisms can become contaminated, worn or electrically faulty, reducing the valve's ability to accurately regulate flow.
• A malfunctioning control valve can affect engine performance, fuel consumption, emissions output and overall drivability. Continued operation with a faulty valve may place additional strain on related engine management components and could result in more extensive diagnostic and repair work if left unresolved.
• Replacing a defective engine control valve restores proper system operation, improves engine efficiency and helps maintain smooth, reliable performance. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810724331

The product you are viewing cross references to these numbers

Engine oil pressure sender. Sits on crankcase.



Fits:
Porsche 958 Cayenne 4.8L S / GTS / TURBO / TURBO S 2011>>

Porsche 95B Macan 3.0L S / GTS
Porsche 95B Macan 3.6L TURBO

Porsche 970 Panamera 3.6L
Porsche 970 Panamera 4.8L S

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94860621300

The product you are viewing cross references to these numbers

Engine oil pressure sender. Sits on crankcase.



Fits:
Porsche 958 Cayenne 4.8L S / GTS / TURBO / TURBO S 2011>>

Porsche 95B Macan 3.0L S / GTS
Porsche 95B Macan 3.6L TURBO

Porsche 970 Panamera 3.6L
Porsche 970 Panamera 4.8L S

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94860621300

The product you are viewing cross references to these numbers

Front crankshaft seal.



Fits:
Porsche 957 Cayenne 3.0L DIESEL 2009-10
Porsche 958 Cayenne 3.0L DIESEL 2011>>
Porsche 958 Cayenne 3.0L HYBRID 2011>>
Porsche MACAN 3.0L V6 TDI 2014>>
Porsche 970 Panamera 3.0L DIESEL 2012>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510105200

The product you are viewing cross references to these numbers

Front crankshaft seal.

Fits:
Porsche 957 Cayenne 3.0L DIESEL 2009-10
Porsche 958 Cayenne 3.0L DIESEL 2011>>
Porsche 958 Cayenne 3.0L HYBRID 2011>>
Porsche MACAN 3.0L V6 TDI 2014>>
Porsche 970 Panamera 3.0L DIESEL 2012>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510105200

The product you are viewing cross references to these numbers

Front crankshaft seal.



Fits:
Porsche 957 Cayenne 3.0L DIESEL 2009-10
Porsche 958 Cayenne 3.0L DIESEL 2011>>
Porsche 958 Cayenne 3.0L HYBRID 2011>>
Porsche MACAN 3.0L V6 TDI 2014>>
Porsche 970 Panamera 3.0L DIESEL 2012>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510105200

The product you are viewing cross references to these numbers

Loctite SI 5900 flange sealant,
50ml

Fits:
Porsche 95B Macan - 2014 to 2018
Porsche 958 Cayenne - 2011 to 2018
Porsche 970 Panamera - 2010 to 2016

LOCTITE® SI 5900 has typical applications that include stamped sheet metal covers where good oil resistance and high joint movement is required. It also has an excellent adhesion profile to an outstanding wide variety of plastic substrates as well as glass, ceramics and metals.

Product benefits:
•   Good oil resistance
•   Withstands joint movement
•   Reduces migration of liquid after application

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330560

The product you are viewing cross references to these numbers