Steering, Hub & Suspension
- Porsche Panamera 2.9L V6
- Porsche Panamera 4 2.9L V6
- Porsche Panamera 4 Sport Turismo 2.9L V6
- Porsche Panamera 4S 2.9L V6
- Porsche Panamera 4S Sport Turismo 2.9L V6
- Porsche Panamera 4 E-Hybrid 2.9L V6
- Porsche Panamera 4 E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera 4S E-Hybrid 2.9L V6
- Porsche Panamera 4S E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera GTS 4.0L V8
- Porsche Panamera GTS Sport Turismo 4.0L V8
- Porsche Panamera Turbo S 4.0L V8
- Porsche Panamera Turbo S Sport Turismo 4.0L V8
- Porsche Panamera Turbo S E-Hybrid 4.0L V8
- Porsche Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8
• Can be used in situ - no need to remove sub-frame from vehicle.
• Applications: Renault; Laguna (01-07).
• Supplied in carry-case.
• Model No. VSE4777• Remove/install front mounting bushes in Laguna rear sub-frame.
• Can be used in situ - no need to remove sub-frame from vehicle.
• Supplied in carry-case.Bush Removal Tool - Renault Laguna
• This unit will allow workshops to check and adjust in-house.
• Laser heads secure to the rig and rest on the bobbins that contact the vehicle’s wheel rim.
• Supplied with comprehensive instructions.
• Model No. GA70CR• Used to check and adjust the alignment of the lasers on Model No. GA70 Four-Wheel Laser Aligner.
• This unit will allow workshops to check and adjust in-house.
• Laser heads secure to the rig and rest on the bobbins that contact the vehicle’s wheel rim.
• Supplied with comprehensive instructions.Calibration Rig for GA70
• Measures wheel geometry by attaching calibrated bubble levels to the wheel studs.
• For accurate results these tools should be used with Model No. GA44 Steering Turntables.
• Supplied in a steel case together with operating instructions.
• Model No. GA42• Aluminium gauge bodies with chemically blackened wheel stud locators.
• Measures wheel geometry by attaching calibrated bubble levels to the wheel studs.
• For accurate results these tools should be used with Model No. GA44 Steering Turntables.
• Supplied in a steel case together with operating instructions.Camber Castor Kingpin Gauge
• Quicker and easier than using ratchet driven spring compressor.
• Plastic coated yokes reduce the risk of spring slippage/damage.
• Suitable for springs from Ø102mm to Ø160mm.
• Model No. RE232• 1500kg Air actuated hydraulic unit with alternative foot operation.
• Quicker and easier than using ratchet driven spring compressor.
• Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from Ø102mm to Ø160mm.Coil Spring Air/Hydraulic Compressing Station 1500kg Capacity
• Quicker and easier than using ratchet driven spring compressor.
• Plastic coated yokes reduce the risk of spring slippage/damage.
• Suitable for springs from Ø102mm to Ø160mm.
• Model No. RE231• 1500kg Foot operated hydraulic unit.
• Quicker and easier than using ratchet driven spring compressor.
• Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from Ø102mm to Ø160mm.Coil Spring Hydraulic Compressing Station 1500kg Capacity
• 1000kg Air operated unit with safety locking guard.
• Supplied with two interchangeable plastic coated lower yokes and a suspension strut clamp.
• Fits a wide range of spring configurations and diameters.
• Also features a strut locating platform for easy movement of the suspension strut to avoid unnecessary lifting.
• Model No. RE300• Fast and safe compression of road springs.
• 1000kg Air operated unit with safety locking guard.
• Supplied with two interchangeable plastic coated lower yokes and a suspension strut clamp.
• Fits a wide range of spring configurations and diameters.
• Also features a strut locating platform for easy movement of the suspension strut to avoid unnecessary lifting.Coil Spring Compressor - Air Operated 1000kg Capacity
• Saves time over traditional methods of demounting springs and saves realignment of suspension during reassembly.
• This is the only aftermarket tool currently on the market capable of handling VW Touran, Citroen C3, Skoda Octavia and Peugeot 107 vehicles and will also fit other vehicles with small (>30mm) access points in the rear spring control arm.
• Capable of use with air impact wrench and supplied with safety key to prevent over-torque and special angled jaws for added safety.
• Supplied in carry-case.
• Applications: BMW, Citroen, Chevrolet, Chrysler, Ford, Honda, Hyundai, Kia, Mazda, Mitsubishi, Peugeot, Seat, Skoda, Suzuki, Toyota, Volvo, VW.
• Model No. RE228• Innovative tool suitable for 95% of all cars with wishbone suspension front or rear.
• Saves time over traditional methods of demounting springs and saves realignment of suspension during reassembly.
• This is the only aftermarket tool currently on the market capable of handling VW Touran, Citroen C3, Skoda Octavia and Peugeot 107 vehicles and will also fit other vehicles with small (>30mm) access points in the rear spring control arm.
• Capable of use with air impact wrench and supplied with safety key to prevent over-torque and special angled jaws for added safety.
• Supplied in carry-case.Coil Spring Compressor - Wishbone Suspension 2500kg Capacity
• Features adjustable safety bar for additional security.
• Compressors have lower safety jaws for ultimate peace of mind.
• Use 19mm hex socket or spanner.
• Model No. AK3843• High security coil spring compressor with 1200kg maximum capacity per pair.
• Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind.
• Use 19mm hex socket or spanner.Coil Spring Compressor 1200kg/Pair
• Wrap-over coil claws for extra safety.
• Suitable for use where space under wheel arch is limited.
• Use with 1/2"Sq drive wrench.
• 230mm Maximum jaw opening.
• Model No. AK3841• Carbon steel, hardened lead screws and cast jaws.
• Wrap over coil claws for extra safety.
• Suitable for use where space under wheel arch is limited.2pc Coil Spring Compressor
• Prevents accidental release of spring under load.
• Use with 24mm hex socket or spanner.
• Model No. AK3844• Features spring loaded safety jaws for easy location of the jaws on assembly.
• Prevents accidental release of spring under load.
• Use with 24mm hex socket or spanner.2pc Coil Spring Compressor with Safety Jaws
• Long-reach arms compress a higher proportion of the coil spring.
• Allows even and safe compression of spring prior to installation.
• Model No. AK3842• Heavy-duty Chrome Vanadium construction.
• Long-reach arms compress a higher proportion of the coil spring.
• Allows even and safe compression of spring prior to installation.350mm Coil Spring Compressor
• Model No. AK384• Carbon steel, hardened lead screws and cast jaws with safety hooks to prevent accidental release of spring under compression.3pc Coil Spring Compressor with Safety Hooks
• Supplied with 2 pairs of drop-forged yokes.
• Safety yokes carefully shaped to prevent coil spring from bowing.
• Suitable for use with air wrenches.
• Wide availability of standard and optional yokes.
• Model No. RE225• 2250kg Maximum jaw loading with 2.9 x safety factor.
• Supplied with two pairs of drop-forged yokes.
• Safety yokes carefully shaped to prevent coil spring from bowing.
• Suitable for use with air impact wrenches.
• Wide availability of standard and optional yokes.
• Standard yokes included.Coil Spring Compressor Kit 2250kg Capacity
• Suitable for inflating tyres on cars, vans and 4x4s.
• Powered by reliable, heavy-duty motor producing 45ft³ of air per hour.
• Integral gauge reads up to 20bar/300psi.
• Maximum Working Pressure: 200psi.
• Compresses free air to 30psi at the rate of 45ft³/hr.
• Accessory kit containing, Presta type adaptor, ball spike and two inflatables adaptors included in storage compartment on base.
• Model No. MAC2300• Housed in rugged composite case.
• Suitable for inflating tyres on cars, vans and 4x4s.
• Powered by reliable, heavy-duty motor compressing free air to 30psi at the rate of 45ft³/hr.
• Integral gauge reads up to 20bar/300psi.
• Supplied with plug for use in cigarette lighter socket.
• Accessory kit, containing Presta type adaptor, ball spike and two inflatables adaptors included in storage compartment on base.12V Heavy-Duty Compressor
• Model No. VS1640• CVJ Boot band pliers with 3/8"Sq drive, for the assembly of new stainless steel bands on drive shafts where a torque setting is required.CVJ Boot Band Pliers
• Enables installation of CVJ boot without splitting drive train.
• Model No. VS705• Composite cone.
• Enables installation of CVJ boot without splitting drive train.CVJ Boot Installation Tool
Model No. VS705
CVJ Boot Installation Tool
• Composite cone.
• Enables installation of CVJ boot without splitting drive train.
Model No. CV96 (x2)
Universal Stretch CVJ Boot
• Universal CV boot made from high quality elastomer material suitable for use with air operated boot installation tools.
• Supplied with fitting kit including clips, grease sachet and cutting guide.
• Suitable for most car and car derived van applications.
You may also refer to the individual Model No. for full specification.
• Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
• No effort and no mess!
• Save on labour time by up to 70% and prevent damage to CV joint.
• Composite body with simple control valve, works from standard workshop air supply.
• While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until the release button is pressed.
• Suitable for cars and light commercial vans.
• Model No. BSL103• Innovative tool saves time, money and frustration.
• Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
• No effort and no mess!
• Save on labour time by up to 70% and prevent damage to CV joint.
• Composite body with simple control valve, works from standard workshop air supply.
• While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until the release button is pressed.
• Suitable for cars and light commercial vans.CVJ Boot Tool
• Kit includes 56mtr* of high quality stainless steel banding with a tensile strength of 420N/mm².
• Dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner.
• Never be caught without the right sized boot clamp again.
• Model No. BSL102
* Approximate quantities• Fast and simple to use.
• Kit includes 56mtr* high quality stainless steel banding with a tensile strength of 420N/mm².
• The dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner.
• Never be caught without the right sized boot clamp again.Universal CVJ Boot Clamp Kit
• Also used for securing CVJ boot clips.
• Model No. VS1633• Formed steel arms with insulated vinyl handles. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses.
• Also used for securing CVJ boot clips.Ear-Type CVJ Boot/Hose Clip Pliers
• Suitable for all earless type CVJ boot clamps.
• Model No. VS1634• Steel jaws with formed handles for extra comfort.
• Suitable for all earless type CVJ boot clamps.CVJ Boot/Hose Clip Pliers Earless Type
• Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length.
• Fitted with large and comfortable handle grip.
• Model No. VS1636• Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material.
• Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length.
• Fitted with large and comfortable handle grip.CVJ Boot/Hose Clip Tool with Cutter
• Suitable for use with Model No. DP935B slide hammer and other popular makes.
• Model No. VS708• Suitable for the removal of most car and light commercial constant velocity joints.
• Suitable for use with Model No. DP935B slide hammer and other popular makes.CVJ Puller Attachment
• Reduces risk of damage to transmission.
• Saves on labour time and suitable for most vehicles.
• Model No. VS710• Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip.
• Reduces risk of damage to transmission.
• Saves on labour time and suitable for most vehicles.CVJ Removal Tool
• Repairs light damage to CV joint threads.
• Set contains sizes to fit the most common types of vehicle.
• Must be used with a light oil to lubricate thread.
• Supplied in storage case.
• Model No. VS715• A must have tool for every workshop.
• Repairs light damage to CV joint threads.
• Set contains sizes to fit the most common types of vehicle.
• Must be used with a light oil to lubricate thread.
• Supplied in storage case.8pc CVJ Thread Chaser
• Metal body and offset valve connector.
• Compatible with both cars and light commercial vehicles.
• Model No. TSTPG43• Dial type pressure gauge, Ø46mm reading to 100psi (7kg/cm²).
• Metal body and offset valve connector.
• Compatible with both cars and light commercial vehicles.0-100psi Dial Type Pressure Gauge
• Calibrated in bar, psi, kg/cm² and kPa.
• Range: 0-255psi (0-18bar).
• Features built-in LED work light for use in low visibility areas, auto power off (to preserve battery life) and low battery indicator.
• Supplied with 350mm rubber hose and clip-on connector.
• Powered by 2 x AAA batteries (supplied).
• Model No. SA391• Robust composite body with backlit LCD digital display.
• Select between bar, psi, kg/cm² and kPa.
• Features built-in LED work light for use in low visibility areas, auto power off (to preserve battery life) and low battery indicator.
• Supplied with 350mm rubber hose and clip-on connector.
• Powered by 2 x AAA batteries (supplied).Digital Tyre Inflator with Clip-On Connector
• Single push button operation with LCD digital display.
• Range: 0-100psi/0-7bar.
• Read-out available in psi, bar, kPa or kg/cm².
• Auto power off feature.
• Includes 1 x CR2032 battery.
• Model No. TSTPG10• Ergonomically designed lightweight tyre pressure gauge.
• Single push button operation with LCD digital display.
• Read-out available in psi, bar, kPa or kg/cm².
• Auto power off feature.
• Includes 1 x CR2032 battery.Digital Tyre Pressure Gauge
• Hardened and tempered stainless steel gauge.
• Metric and Imperial readings with conversion between the two.
• Zero setting control for comparative measurement.
• Range: 0-25mm/0-1".
• Supplied in storage case.
• Model No. VS0560• Hardened and tempered stainless steel gauge.
• 11mm High figures in LCD display for ease of reading.
• Metric and Imperial calibration with conversion between the two.
• Zero setting control allows for comparative measurement.
• Supplied in storage case.Digital Tyre Tread Depth Gauge
• 10mm High figures in LCD display.
• Metric and Imperial calibration with conversion between the two.
• Range: 0-25mm/0-1".
• Zero setting control allows for comparative measurement.
• Model No. VS0564• Tough composite sliding gauge.
• 10mm High figures in LCD display for ease of reading.
• Metric and Imperial calibration with conversion between the two.
• Zero setting control allows for comparative measurement.Digital Tyre Tread Depth Gauge
• Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions.
• Suitable for all ear-type CVJ boot clips.
• Model No. VS1639• Steel jaws with PVC coated handles for added comfort.
• Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions.
• Suitable for all ear-type CVJ boot clips.Ear-Type Clip Pliers - Extra Heavy-Duty
• Dial type pressure gauge with rotating bezel.
• 610mm flexible hose with locking connector.
• 0-100psi.
• Supplied with accessory for inflating items such as small inflatable boats, air beds and balls etc.
• Model No. FP1• Steel framed foot pump with Ø50 x 120mm steel barrel.
• Dial type pressure gauge with rotating bezel.
• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.
• Fitted with 610mm of flexible pressure hose with locking connector.
• Supplied with accessory for inflating items such as small inflatable boats, air beds and balls etc.Single Barrel Foot Pump
• Dial type pressure gauge with rotating bezel.
• Gauge calibrated in psi and bar and ranging from 0-100psi and 0-7bar.
• Fitted with 610mm flexible pressure hose with locking connector.
• Supplied with accessory for inflating items such as boats, air beds and balls etc.
• Model No. FP2• High power, steel framed foot pump with two Ø50 x 120mm steel barrels.
• Dial type pressure gauge with rotating bezel.
• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.
• Fitted with 610mm flexible pressure hose with locking connector.
• Professional pump for emergency use.Twin Barrel Foot Pump
• Features large metal pedal for easy operation and control.
• Easy-to-read dial type pressure gauge.
• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.
• Fitted with 1020mm flexible pressure hose with locking connector.
• Supplied with accessories for inflating items such as small inflatable boats, air beds and balls etc.
• Model No. FP4• Professional steel framed foot pump with two Ø50 x 120mm steel barrels.
• Features large metal pedal for easy operation and control.
• Easy-to-read dial type pressure gauge.
• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.
• Fitted with 1020mm flexible pressure hose with locking connector.
• Supplied with accessories for inflating items such as small inflatable boats, air beds and balls etc.Twin Barrel Foot Pump
• Dial type pressure gauge with rotating bezel.
• Gauge calibrated in psi and bar with ranges from 0-100psi and 0-7bar.
• Fitted with 500mm flexible pressure hose with clip-on type connector.
• Model No. S0931• Steel framed foot pump with two Ø50 x 95mm steel barrels.
• Dial type pressure gauge with rotating bezel.
• Gauge calibrated in psi and bar with ranges from 0-100psi and 0-7bar.
• Fitted with 500mm flexible pressure hose with clip-on type connector.Foot Pump Twin Barrel - Compact
• Optimises vehicle performance and set up after installation or modification of steering or suspension components.
• Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job.
• This fully portable kit is also ideal for track-day set up for the enthusiast.
• Works on practically all cars and light commercials with rim diameters between 330mm(13") and 560mm(22").
• Supplied with steering wheel clamp, wheel turn plates and wheeled storage rack.
• Supplied with comprehensive operating instructions.
• Model No. GA70• Fast, simple and accurate alignment of both front and rear wheels.
• Optimises vehicle performance and set up after installation or modification of steering or suspension components.
• Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job.
• This fully portable kit is also ideal for track-day set up for the enthusiast.
• Works on practically all cars and light commercials with rim diameters between 330mm(13") and 560mm(22").
• Supplied with steering wheel clamp, wheel turn plates and wheeled storage rack.
• Supplied with comprehensive operating instructions.Four-Wheel Laser Wheel Aligner
• Features a variety of adaptors used in different combinations for extracting and installing.
• Supplied in a carry-case with each part numbered for simple selection.
• Model No. VSE725• Suitable for removing and installing the upper front ball joint in situ without the need to disassemble.
• Features a variety of adaptors used in different combinations for extracting and installing.
• Supplied in a carry-case with each part numbered for simple selection.Front Axle Upper Ball Joint Extractor/Installer - VW T4