Driveshafts & Parts
Fits:
Porsche 982 (718) Boxster S 2017>> (inner / outer)
Porsche 982C (718C) Cayman S 2017>> (inner / outer)
Porsche 970 Panamera 2010-16(inner / outer)
Click 'Zoom in' for large parts diagram.
Diagram ref no 4 or 14 (982 model)
Diagram ref no 6 (970 model)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99951278301
The product you are viewing cross references to these numbers
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)
Fits:
Porsche 970 Panamera >>2010
All-wheel drive (option code 339)
Click 'Zoom in' for large parts diagram.
Diagram ref no 15
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034926700
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
Fits:
Porsche 970 Panamera / S 2010-14
Porsche 970 Panamera 4 /4S 2010-14
Porsche 970 Panamera GTS 2012-14
Porsche 970 Panamera Hybrid 2012-14
Porsche 970 Panamera Turbo / S 2010-14
The innovative Drive Shaft Clamping Center Support (DSCCS) by EPS is the only true Permanent fix to premature bearing support failures. This Patented device was developed by our team of technicians whom over the course of 2 years were able to create what is now the end-all solution to failing Bearing Supports.
The Clamping Center Support is the ONLY device that can be installed without removing the Drive Shaft from the vehicle or without requiring the disassembly of the Drive Shaft. Why is this so important?
- By not having to disassemble the Drive Shaft means that NO re-balancing of the shaft is required. All other methods of Bearing Support replacement require this expensive and lengthy procedure. Failure to balance the once disassembled Drive Shaft would result in major vibrations.
- Our Clamping Bearing Support installs easily to your Drive Shaft, using basic household tools, in less than an hour. This is a Do-it-Yourself repair that will save you very costly repair bills and unnecessary time down. Should you choose to have a professional install it, the labor times will be much less than Drive Shaft replacement or any other method of repair.
The cause of the premature Drive Shaft Support failure is a direct result of too much continuous stress imposed upon the rubber in the mount. This is more the product of the Drive Shaft design than the quality of the rubber material in the mount. Unfortunately, by merely replacing the Bearing Support with another similar rubber mount you can expect much of the same results experienced with the factory rubber mount.
There is only One certain and definite fix.
The EPS Drive Shaft Clamping Center Support for the Porsche Cayenne, Volkswagen Touareg & Audi Q7 takes a completely different approach in solving this, all too common, problem. Getting away from the proven failure-prone solid rubber vibration dampener, we instead use multiple, hollow Silicone Pods. This design is much better equipped to withstand the constant compressing and stretching forces generated while in use. The silicone material also does a much better job of handling the heat and atmospheric conditions located under your vehicle. Even better, although we have over Two Years of use on our test vehicle and the DSCCS is still functioning flawlessly, in the rare event that any of the Pods on the DSCCS fail, they are very easily replaced in minutes.
Key Benefits :
• Permanently repairs the notorious bearing support
• DIY installation - typically in under one hour using household tools
• No need to remove or disassemble your current Drive Shaft
• No need to re-balance your Drive Shaft
• No need to send in your faulty Drive Shaft
• No core charges
• Lightweight - Spend less on shipping
• Will pay for itself in labor & shipping costs
• Save money & downtime
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97042103151EPS
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera S Hybrid V6 3.0L
Fits:
Porsche 970 Panamera 2 / 2S 2010-16 (I1X2)
Porsche 971 Panamera 2 / 2S 2017>> (I1X2 / I0J2 / I0J3)
I1X2 - Rear-wheel drive
I0J2 - Load group 1 FA/1 RA
I0J3 - Load group 1 FA/2 RA
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
298407475
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
Fits:
Porsche 970 Panamera 2 / 2S 2010-16 (I1X2)
Porsche 971 Panamera 2 / 2S 2017>> (I1X2 / I0J2 / I0J3)
I1X2 - Rear-wheel drive
I0J2 - Load group 1 FA/1 RA
I0J3 - Load group 1 FA/2 RA
Click 'Zoom in' for large parts diagram.
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
298407313
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
Driveshaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.
As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.