Steering Track Rods
Bump geometry correction. 1 kit, req'd per car.
For Porsche 993 1995-98 W/O RS Wheel Carriers
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
- Corrects for bump steer
- Eliminates rubber inner-joint
- Enhanced driving precision
- Easier and more cost effective than RS wheel carrier conversion
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180018
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
2 件套
使用我们的 BBI Porsche 964 993 RSR 型外拉杆,增强保时捷转向系统的操控性。这些外拉杆采用特氟龙内衬球形接头,与原装部件相比,可提供更好的反馈。不仅如此,它们还专门设计用于协助调整颠簸转向,使其成为峡谷雕刻和赛道爱好者的必备升级。
适合:
保时捷 993 1994-97
一体式外拉杆配有特氟隆内衬球形件,可提供比原装部件更好的反馈和更长的使用寿命。设计还有助于调整碰撞转向,是赛道爱好者的必备之物。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BBI99340100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Set of 2
Fits:
Porsche 964 1989-1994
Porsche 993 1994-97
These tie rods provide more consistent and firmer feedback without increase of NVH (noise, vibration and harshness)
These are a required upgrade for 964 owners looking to run our billet uprights
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99334703105
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
For use with adjustable control arms
Full encapsulating weather/dust seals are an option with this kit to provide extra protection against the dirty driving conditions both under the car and behind the front wheels. These will work with all Rennline control arms and bump steer kits.
Sold in Pairs
Fits Rod end sizes Male: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
Female: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
Fits:
Porsche 964
Porsche 993
Fits all RHD or LHD cars
This kit was originally designed by Porsche and fitted to the 993's that came with the optional 18" wheels.
It is a recommended upgrade for any '92-'98 964/993 car regardless of tire size.
Please Note: The steering racks on 89-91 964 are different then later 964 and 993 cars. The hydraulic lines slightly interfere with the placement of the brace so the lines need to be gently pushed/ bent and the brace needs mount with the flush side down to accommodate.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3602101601
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Enhance Your Porsche Steering with Performance Steering Track Rod Arms: Technical Specifications and Benefits
Technical specifications of Performance Steering Track Rod Arms:
- Performance steering track rod arms, also known as tie rod arms, are crucial components in the steering system of a Porsche.
- They connect the steering rack to the steering knuckle or wheel hub, transmitting steering inputs and allowing for precise control of the vehicle.
- Performance track rod arms are specifically designed to improve steering response, stability, and overall handling characteristics.
- They are made from high-quality materials such as forged aluminum alloy or hardened steel for increased strength and durability.
- Performance steering track rod arms are available as aftermarket upgrades or standard replacements for Porsche models.
Benefits of upgrading or replacing Performance Steering Track Rod Arms for your Porsche:
Enhanced steering precision: Performance track rod arms offer improved rigidity and stiffness, resulting in more precise steering response and feedback.
Reduced play and improved stability: Upgrading to performance arms helps reduce steering play, ensuring a more direct and accurate connection between the steering rack and the wheels, resulting in increased stability and control.
Improved cornering ability: Performance track rod arms provide better control during cornering, minimizing understeer or oversteer tendencies and enhancing overall handling performance.
Increased durability: Performance arms are designed to withstand higher loads and provide increased durability compared to standard arms, ensuring long-lasting performance even under demanding driving conditions.
Optimal alignment adjustments: Performance track rod arms often offer adjustable features, allowing for precise alignment adjustments, which can optimize tire wear, enhance traction, and improve cornering stability.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance steering track rod arms specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our experienced team can assist you in selecting the appropriate track rod arms based on your Porsche model, year, and specific steering system requirements. We understand the importance of achieving optimal steering performance and handling characteristics, and we can guide you in choosing the best arms that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's steering precision, stability, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.
- Strut Brace
- Anti Roll Sway Bar
- Lowering Springs
- Control Arms Front
- Control Arms Rear
- Drop links Front
- Drop links Rear
- Engine mounts
- Gearbox mounts
- Top mounts Front
- Top mounts Rear
- Front Sub frame
- Rear Sub Frame
- Air Lift System
- Roll Cages
- Bilstein SPORT B6 Dampers
- Bilstein SPRINT B8 Dampers
- Bilstein B12 Tuning Suspension Kit
- Bilstein B14 PSS Coilover Suspension Kits
- Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins Road & Track Suspension
- Koni Sports
- Koni Special Active
- Superpro Polyurethane Bushes
- Powerflex Polyurethane Bushes
- Powerflex Black Series Bushes
- Powerflex Heritage Collection
- DesignTek D220 Coilover Suspension Kit
- H&R Adjustable Suspension Kits
- H&R Cup-Kit Sport Suspension
- KW Variant 1 Inox Suspension kits
- KW Variant 2 Inox Adjustable Rebound Damping Suspension
- KW Variant 3 Adjustable Suspension kits
- KW Clubsport Coilover Suspension Kits
- KW Clubsport Coilover Suspension Kits WITH Top Mounts
- Sachs Performance Suspension CSS
- Nitron Automotive Range