IMS 直接供油 (DOF)

IMS KIT DOUBLE ROW STEEL BEARING

Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with DOUBLE row bearing.

Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004

Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions

The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.

This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

IMSDOF9962

您正在查看的产品与这些编号存在交叉引用关系

IMS KIT SINGLE ROW STEEL BEARING

Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with SINGLE row bearing.

Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004

Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions

The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.

This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

IMSDOF9961

您正在查看的产品与这些编号存在交叉引用关系