EPS品牌的IMS

Additional rear main no. 8 bearing seal and housing.



Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009



Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.

Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996986REAREPS

您正在查看的产品与这些编号存在交叉引用关系

中间轴 (IMS) 轴承套件 - 适用于保时捷

8102 专为快速安全地拆卸和更换 M96 和 M97 发动机上的保时捷 IMS（中间轴）轴承而开发，该发动机适用于 1999 年至 2008 年所有水冷 911、Boxster 和 Cayman 车型。配有凸轮轴和曲轴正时工具。

保时捷应用：911，Boxster，开曼（1999 - 2008）。
发动机代号应用包括：M96、M97。
套件包括适用于早期和晚期发动机的凸轮轴和曲轴锁定工具。
提供了 2 种拆卸轴承的方法。按照 OEM 说明安装轴承。
谢菲尔德制造。重要提示：使用前确保力螺钉已用二硫化钼润滑脂充分润滑。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8102

您正在查看的产品与这些编号存在交叉引用关系

IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01

Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005

Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L

**M96 Engine only 

Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!

Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.

For More Information CLICK HERE

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102EPS

您正在查看的产品与这些编号存在交叉引用关系

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102TOOL

您正在查看的产品与这些编号存在交叉引用关系