Autoglym

Supreme Car Care Collection

Clean your entire car, inside and out, with this supreme collection of nine car cleaning products and three accessories for that perfect finish.

includes:
Bodywork Shampoo Conditioner 500ml
Rapid Ceramic Spray 500ml
Super Resin Polish 325ml
Fast Glass 500ml
Clean Wheels 500ml
Instant Tyre Dressing 500ml
Wheel Protector 300ml
Interior Shampoo 500ml
Vinyl & Rubber Care 500ml
Microfibre wash mitt
Hi-tech Finishing Cloth
Hi-Tech AquaDry Cloth

Clean your entire car from wheels and windows to paintwork and plastic with this comprehensive kit. Long-lasting protective products will enhance your car inside and out. Premium accessories are included, for ultimate car care perfection.

We recommend to use the products in the following order to get the best results:

1. Clean your wheels with our Clean Wheels 500ml.

2. Wash your car with the Bodywork Shampoo Conditioner.

3. Finish your wheels with our Instant Tyre Dressing and finally apply the Wheel Protector.

4. Polish the car with Super Resin Polish.

5. Apply the wax with Rapid Ceramic Spray.

6. Finally clean the windows with Fast Glass and touch up plastic & rubber with our Vinyl & Rubber Care.

7. Continue inside by applying the Interior Shampoo.

8. Use Vinyl & Rubber care inside if required

9. Finish with cleaning the windows with Fast Glass inside the car The accessories can be used within the different stages of cleaning the car. Like buffing your car after applying polish & wax or the wash mitt when using the car shampoo. Full instructions for the usage of each product can be found on each individual pack.

CLEANING, TURBO CHARGED

Engine bay dirt? Seat stains? It’s all the same to our All Purpose Cleaner. Despite its strength, this  is beautifully mild on all interior and external surfaces, gently returning your car to its former glory. even though time is of the essence, your car deserves a deep but safe clean.

MILES MORE VERSATILE

Exterior. Interior. Our All Purpose Cleaner does it all. Whether you’re cleaning delicate areas like chrome trims, or focusing on your leather, suede or Alcantara, you can be safe in the knowledge that this is one sensitive product.

EXTRA CLEANING POWER

Stubborn dirt, bug residue, even coffee stains – they’ve met their match. Designed for use as a pre-wash prior to hand washing, our All Purpose Cleaner can be sprayed onto hard-to-reach areas inside and out, before effortlessly rinsing away.

ZESTY FRESH

Our All Purpose Cleaner not only cleans your car, it leaves behind a fresh, orange zest fragrance. All to make cleaning and driving your car a more comfortable experience for you and your passengers.

Everyday clean-ups

24 cloths per pack, so you always have one ready for the next job

Not every cleaning task calls for your best finishing cloth. Autoglym Car Cleaning Cloths are designed for those harder-working jobs where durability and versatility matter most. Suitable for wet or dry use, these dependable microfibres take on grimy engine bays, door shuts and fuel filler areas, as well as interior spills, stains, plastics and muddy trims. With 24 cloths in every pack, you’ll always have one to hand when mess strikes – making routine car cleaning quicker, easier and more effective.

BUILT FOR TOUGH TASKS

Perfect for areas you don’t want to use your best microfibres on, from greasy engine bays to dirty door shuts and fuel filler cavities.

INSIDE AND OUT

Highly versatile cloths suitable for interior and exterior use, ideal for tackling spills, stains, plastics and buffing seats for a fresher cabin.

GREAT VALUE PACK

A convenient pack of 24 durable 250gsm microfibre cloths gives you plenty of coverage for all your everyday cleaning needs.

Everything you need to clean and protect fabric convertible soft top hoods.

Regularly cleaning your soft top will keep green algae at bay and its original colour looking vibrant. Our Convertible Soft Top Clean & Protect Complete Kit contains everything you need to clean and protect your mohair, double duck, fabric or canvas fabric hood. If you have a vinyl hood, clean thoroughly with Bodywork Shampoo Conditioner, then protect with Bumper & Trim Gel.

Wash the supplied sponges as required in clean, warm water and allow to air dry.

Contents:
500ml Soft Top Cleaner, 500ml Soft Top Protector, 1 x cleaning sponge, 1 x Soft Top Protector applicator sponge

How to use this product:

• Working out of direct sunlight, brush and vacuum the hood to remove any loose dirt.

Dampen the roof with water.

Shake Soft Top Cleaner well. Mix 250ml of Soft Top Cleaner solution with 500ml of water, in a suitable container.

Test on a small inconspicuous area for colourfastness.

Saturate the white cleaning sponge provided in the diluted product, start by concentrating on any stains or green algae first.

Continue by saturating the sponge and spreading the cleaner onto the fabric hood allowing even coverage (make sure you use the full contents of the container). Once an even coverage has been achieved start to work the chemical into the hood. If your hood is very dirty, cover with a plastic sheet and allow the cleaner to continue working overnight. Wipe away product runs from glass and paintwork with a damp microfibre.

Using a low-pressure hose, rinse off the Soft Top Cleaner until there is no cleaner left on the hood. Do not use a pressure washer to remove the cleaner. It is important that all the cleaner is removed before moving onto Soft Top Protector. Any remaining cleaner will affect the performance of the Soft Top Protector. Now, dry the vehicle leaving the soft top damp and move on to apply Soft Top Protector, reading the instructions carefully.

Soft Top Protector Usage Instructions:
Clean roof with Soft Top Cleaner and leave damp.

Rinse the blue Soft Top Protector applicator under a tap for a few seconds then squeeze until damp. (This will help activate the applicator)

Working out of direct sunlight, pour the Soft Top Protector onto the applicator and apply systematically to the hood to ensure even coverage, using approximately half of the bottle contents. Ensure the roof is evenly coated.

Remove any overspray from paintwork and glass immediately. We recommend using Fast Glass to remove overspray from glass.

Allow the protector to fully dry before driving. Store product at room temperature and do not allow to freeze.

Bodywork & Wash & Protect

Four premium products to clean & wax your car, leaving a perfect shiny finish.

Includes:
Foaming Car Wash 500ml
Rapid Aqua Wax 500ml
2 x blue Microfibre cloths

This four item kit pairs our high foaming shampoo with our sprayable, banana scented, wet-wax that will leave your whole car shining. Two premium microfibres are included to dry and buff your car to a shine. Washing and waxing your car has never been simpler.

HOW TO USE:

We recommend to use the product in following order for best results:

1) Wash your car with our Foaming Car Wash

2) Rinse car and leave car wet. Apply Rapid Aqua Wax to wet car and use cloths to buff in the wax.

Full instructions for each product can be found on each individual pack.

The Ultra-Soft Drying Towel is made from a high-density, twisted loop material designed to absorb and retain more water than regular drying towels. Super-soft lint-free fibres allow the towel to effortlessly glide across surfaces and remove all moisture, leaving behind a flawless, streak-free finish on paintwork and glass.

The Ultra-Soft Drying Towel is highly durable and remains effective and retains shape after use and washing. The towel can be machine washed up to 40 degrees Celsius and tumble dried to keep the fibres plush, just dont use fabric softener.

Towel Size 80cm x 60cm

Ultra High Definition Ceramic Coating is the most durable paint protection product we have ever released. Throughout its scrupulous development our chemists have continuously advanced the formulation, to produce a ceramic coating refined to a degree of unrivalled depth of gloss.

Ultra High Definition Shampoo and Ultra High Definition Wax enhance the performance even further, increasing durability to its full potential. When it comes to taking car care to the next level, Ultra High Definition products make the perfect harmonious team. This system enables you to achieve professional results at home and makes your car care programme even easier and more enjoyable. The Ultra High Definition Ceramic Coating kit will equip you with the perfect apparatus to prepare your paintwork for this semi-permanent coating to bond to its surface and lock in an immaculate finish for up to 12 months.

What’s Inside The Box:

• 1 x UHD Preparation 100ml
• 1 x UHD Ceramic Coating 100ml
• 1 x UHD Ceramic Coating Applicator
• 1 x Preparation Cloth
• 1 x Finishing Cloth

How to use

Paintwork preparation with UHD Preparation

This stage is essential for providing the perfect surface to allow UHD Ceramic Coating to fully bond to the paintwork.

• Ensure the vehicle is clean, dry and free of contaminants. It is recommended to wash the car thoroughly with a car shampoo and remove any fallout with a fallout remover or clay bar. For the perfect finish, light scratches and swirl marks should also be removed using a suitable polish or scratch remover at this stage.
• Thoroughly wipe down all of the paintwork with UHD Preparation to remove any existing waxes, sealants or oils still present on the surface. Apply product directly to the Preparation Cloth and then wipe over the paintwork systematically in straight lines, ensuring all areas intended to be coated are covered. Wipe away any remaining residue with a dry part of the Preparation Cloth, turning the cloth regularly to avoid saturation.

• Before you begin, carefully plan your application process. Ideally you will want to work in 50cm x 50cm sections (average sized panel) at a time. The temperature and humidity are likely to affect the drying and curing time required. We recommend determining the optimum drying time on the first panel you apply the product to.
• Once you apply the product it will begin to evaporate. When the product appears to have formed small beads and a film is beginning to form this is the time to buff off the product. On warmer days this will take 1-2 minutes, on cooler days 3-5 minutes. Use this first panel as your guide for the rest of the car.
• Apply UHD Ceramic Coating in straight lines using the UHD Ceramic Coating Applicator taking care not to apply too much UHD Ceramic Coating.
• After applying to one averaged sized panel, and allowing the appropriate curing time, buff well using the red Finishing Cloth.
• Move onto the next panel, adding small amounts of product to the UHD Ceramic Coating Applicator if required and buff when dry.
• Once you have coated all intended areas and buffed, change the position of the car to view the paintwork in different lighting, before performing a spot check. Re-buff any missed sections with the Finishing Cloth.
• Finally, allow UHD Ceramic Coating to fully cure on your car for a minimum of 4 hours. During this period it should remain out of wet weather and environments with high dust or contamination.
• Do not wash the vehicle for 24 hours after application.

Note: If the product has been left to cure for too long it may become difficult to remove. If this happens, simply apply more product over the small area and buff immediately. Remove any excess product from plastic or glass with UHD Preparation before it dries. UHD Ceramic Coating cannot be used on any surface other than paintwork. Do not use on matt paint.

Applying ceramic protection often takes time to achieve the best results. Rapid Ceramic Spray is a quick and easy way to add protection to your paintwork.

The ceramic hybrid formula quickly bonds to the paintwork with a simple spray and microfibre buff. The tropical scented coating product offers up to 3 months of durable hydrophobic protection, and the unmistakable deep gloss finish will make your car stand out from the crowd.

Do not apply in direct sunlight or if paintwork is warm to the touch. For best results do not apply in temperatures over 25°C. Can be applied to wet paintwork but for maximum durability apply when dry.

• Wash the car thoroughly and remove any fallout with Magma or Clay Detailing Complete Kit.
• Shake well. Work on wet or dry painted surfaces in an area no larger than a shoulders width apart.                 
• For dry cars: Spray sparingly directly onto paintwork or onto a clean microfibre cloth or applicator and spread.
• For wet cars: Spray sparingly directly onto paintwork and spread with an Autoglym InstaDry. Two to three sprays per panel is sufficient, no more than two on smaller panels.
• Take a clean Hi-Tech Microfibre Finishing Cloth and buff to a high gloss before moving to another area of paintwork. Use additional cloths as required.
• A second coat may be applied, allow 24 hours between applications.

Polar Mitt is ultra-soft & absorbent with fine microfibre cotton strands, leaving a streak free result. Includes a wash & storage bag, Polar Mitt is machine washable, and bag keeps mitt clean whilst drying & in storage. Perfect partner for Polar Wash.

NO PRESSURE WASHER? NO PROBLEM!

The alternative way to safely apply thick clingy snow foam to your car, all without a pressure washer or foam cannon in sight. Our Polar Foam Sprayer dares to be different without jeopardising the deep clean or finish, your car deserves. Instead, you’ll easily achieve an all-out superior wash and level of protection that’ll make your car forecourt worthy.

Lashes of cleaning power

Thick, clingy foam for Polar Blast, an optimised density for an efficient deep clean with Polar Wash, and the perfect consistency to apply Polar Seal in seconds. Our Polar Blaster will turn your pressure washer into the ultimate car cleaning machine, rapidly ensuring total coverage with the ideal level of foam for a swirl-free, super glossy finish.

WIDE NECK BOTTLE

For ease of use we’ve thought of everything, down to the smallest detail. In this case, the wide neck reservoir bottle. Beautifully considered, so you can pour the correct amount of diluted product, without spilling a drop.

ADJUSTABLE SPRAY PATTERN

To ensure total coverage and appropriate dwell time, the Polar Blaster can be quickly adjusted to follow your car’s contours. Simply ‘start your engines’ (aka your pressure washer), turn the nozzle protector anti-clockwise and away you go.

EXCELLENT FOAMING CAPABILITIES

The Polar Blaster produces just the right thickness of foam, whether you’re pre-washing, washing or sealing. And all you need to do to make sure you have the best quality foam every time. Turn the mix dial on the top clockwise until it locks out.

Refresh tired paintwork with Autoglym Paint Reviver – visually concealing swirls and fine scratches while restoring colour and gloss.

REVIVE YOUR DRIVE

Revives paint colour and enhance gloss - for over three months

When your paintwork is looking dull or marked, Autoglym Paint Reviver offers a quick and effective refresh. This non abrasive formula works by filling and blending swirls and fine scratches into the clear coat, immediately improving the appearance of your paint. Easy to apply by hand and perfect for full vehicle application or individual panels, it restores depth of colour and enhances gloss with results that last for over three months. Ideal for lacquered finishes where a fast visual improvement is all that’s needed.

We know how much you love your bike and want it to have the very best in life. Motorcycle Cleaner is a non-corrosive, water-based formula which can be used safely and effectively on every area of your bike, no matter how exotic it is. It quickly dissolves road dirt, salt, brake dust, oil, grease and insect remains leaving your bike brilliantly clean.

How to use:

• Do not use in direct sunlight and ensure all surfaces are cool to the touch. This will prevent the cleaner drying during use.
• Rinse the bike with cold water and apply Motorcycle Cleaner generously to one area at a time.
• Use a brush for hard to reach areas and heavily soiled parts. Use a soft sponge for paintwork and easily accessible components.
• Rinse thoroughly and move to the next area.

A super-absorbent, microfibre wash mitt designed to lift and trap dirt with ease.  

The Autoglym Microfibre Wash Mitt has ultra-plush microfibre noodles that lift dirt and grime with ease whilst being gentle on paintwork. Specially designed mesh inserts remove stubborn deposits, bug remains and bird droppings from glass, wheels, headlights and plastic bumpers.

Features an elasticated cuff to prevent mitt slipping off during use. Densely packed microfibre noodles ensure maximum levels of shampoo suds and optimal glide to make cleaning your vehicle as easy as possible.

Care instructions: Hand wash separately before first use to ensure the mitt is free from contaminants. On first use colour from mitt may run. After use, hand wash in cold water and leave to air dry. Ensure mitt is thoroughly dry before storing.

Important: Do not use mesh on paintwork. Do not machine wash or dry. Do not use with strong detergents or wheel cleaners.