Sforza

Carbon Fibre Roof Fins – GT3 RS Style 
Sold as a pair

Add a distinctive GT3 RS-inspired detail to your Porsche 911 992 with the SFORZA Carbon Fibre Roof Fin Set.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
• Porsche 992.2 Turbo 3.6L 2024>>
• Porsche 992.2 GT3 2025>>

Supplied as a left and right-hand pair, these roof fins are manufactured from pre-preg carbon fibre using an autoclave process at high temperature and pressure. They are finished with a gloss clear coat that highlights the exposed carbon fibre weave.

Compatible with the original Porsche 992 GT3 RS roof and standard 992 Coupé roof, the fins provide a straightforward way to introduce GT3 RS-style detailing without replacing the complete roof panel.

GT3 RS-Inspired Roof Styling

The roof fins reproduce one of the distinctive styling details associated with the Porsche 992 GT3 RS.

Positioned along the roof, they add a more purposeful motorsport-inspired appearance and work particularly well when combined with other exposed carbon fibre components.

They can also be fitted to the SFORZA Sport Classic / GT3 RS-style carbon fibre roof panel, allowing the complete roof area to be upgraded with a coordinated carbon finish.

Pre-Preg Autoclave Carbon Fibre

SFORZA manufactures the roof fins from pre-preg carbon fibre using an autoclave moulding process.

The material is cured under controlled high temperature and pressure to produce lightweight, consistent components with the premium surface quality expected from a visible carbon fibre exterior upgrade.

Gloss Carbon Fibre Finish

The exposed carbon weave is protected by a gloss clear coat, providing a deep, high-quality finish that complements both factory and aftermarket carbon fibre components.

The fins are particularly effective when paired with carbon fibre side skirts, mirror components, spoilers and the SFORZA carbon roof panel.

Simple Installation

Unlike the complete SFORZA replacement carbon roof, these roof fins do not require removal of the original roof panel.

They are installed using the supplied adhesive tape, making them a considerably simpler exterior upgrade.

Correct positioning and thorough preparation of the mounting surface are important to achieve secure adhesion and an accurate appearance.

Compatible Roofs

Suitable for:

• Original Porsche 992 GT3 RS roof
• Original Porsche 992 Coupé standard roof
• SFORZA Sport Classic / GT3 RS-style carbon fibre roof panel – SFC992817018GT3RS

Not suitable for Porsche 992 models equipped with a sunroof.

Porsche 911 992 GT3 RS-Style Carbon Fibre Roof Fins

SFORZA carbon fibre roof fins provide Porsche 992 owners with a simple way to introduce the distinctive roof styling associated with the 992 GT3 RS.

Their pre-preg autoclave carbon construction and exposed gloss finish make them particularly suited to Porsche 992 Coupé models already fitted with other carbon fibre exterior upgrades.

For a more comprehensive transformation, the fins can be combined with the SFORZA Sport Classic / GT3 RS-style carbon roof panel to create a coordinated exposed carbon fibre roof package.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT817018LA3GRS

The product you are viewing cross references to these numbers

Carbon Fibre Exterior Roof Panel – Sport Classic / GT3 RS Style

Transform the appearance of your Porsche 911 992 Coupé with the SFORZA Carbon Fibre Exterior Roof Panel, featuring styling inspired by the Porsche 992 Sport Classic and GT3 RS.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
• Porsche 992.2 Turbo 3.6L 2024>>
• Porsche 992.2 GT3 2025>>

Manufactured from pre-preg carbon fibre and autoclave moulded at high temperature and pressure, this replacement exterior roof panel combines lightweight construction with a premium exposed carbon weave and gloss clear coat finish.

Weighing approximately 2.6kg, it is an ideal upgrade for owners looking to reduce weight high on the vehicle while adding one of the most distinctive carbon fibre features available for the 992.

Why Consider a Carbon Fibre Roof Upgrade?

The roof is one of the highest body panels on the car, making it a particularly desirable location for weight reduction. Reducing mass high in the vehicle can help lower the car's overall centre of gravity, although the actual benefit will depend on the weight of the original roof being replaced.

Beyond weight, the exposed carbon fibre creates a strong visual link to Porsche's more focused performance models and gives the 992 a distinctive Sport Classic and GT3 RS-inspired appearance.

Reasons to consider the upgrade include:

• Lightweight carbon fibre construction
• Approximately 2.6kg panel weight
• Reduces weight at one of the highest points of the body
• Sport Classic and GT3 RS-inspired appearance
• Exposed carbon fibre across a large exterior surface
• Complements other carbon fibre exterior upgrades
• Ideal for performance, restomod and bespoke
• Porsche 992 builds
• Direct replacement rather than a carbon overlay

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA roof panel is manufactured from high-quality pre-preg carbon fibre using an autoclave moulding process.

The carbon is cured under controlled high temperature and pressure, producing a lightweight and consistent component with the surface quality required for a large visible exterior panel.

Gloss Exposed Carbon Finish

The carbon weave remains exposed beneath a gloss clear coat, creating a deep, premium finish that highlights the construction of the panel.

As one of the largest exterior surfaces on the car, the carbon roof can dramatically change the appearance of the 992 and works particularly well alongside carbon fibre side skirts, mirror components, spoilers and other aerodynamic upgrades.

Compatible Models

Suitable for Porsche 911 992 Coupé models.

Important: This roof panel cannot be used as a replacement roof for the Porsche 992 GT3 RS. It does not incorporate the side flap indentation/housings required by the GT3 RS roof configuration.

Professional Installation Required

This is a replacement exterior roof panel and is not a cover designed to fit over the original roof.

The original exterior roof panel must be removed and the SFORZA carbon component installed using a suitable polyurethane adhesive. Adhesive is not supplied.

Installation requires removal of both the front and rear windscreens and should only be carried out by a qualified bodyshop experienced with Porsche 992 body construction and assembly.

A DIY installation manual is not supplied.

Porsche 911 992 Carbon Fibre Roof Panels

A carbon fibre roof is one of the most distinctive exterior upgrades available for the Porsche 911 992, combining lightweight construction with the visual appeal associated with Porsche's more focused performance models.

Unlike a carbon-look wrap or overlay, the SFORZA component replaces the original exterior roof panel. Its pre-preg autoclave construction and exposed gloss carbon finish make it particularly suited to high-end Porsche 992 performance, restomod and bespoke builds.

For owners looking to create a Sport Classic or GT3 RS-inspired Porsche 992, the carbon roof can also form the centrepiece of a wider exterior carbon package incorporating side skirts, mirror trim, spoilers and aerodynamic components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC992817018GT3RS

The product you are viewing cross references to these numbers

Carbon Fibre Side Sill Set – Sold as a Pair

Give your Porsche 911 992 a more aggressive GT3-inspired appearance with the SFORZA GT3-Style Carbon Fibre Side Skirt Set.

Designed for Porsche 992 Carrera, Carrera S, Carrera T, Carrera 4S, Targa and GTS models, these side skirts directly replace the original factory components, adding a distinctive motorsport-inspired look to the lower profile of the car.

Manufactured from pre-preg carbon fibre and autoclave cured at high temperature and pressure, they combine lightweight construction with a premium exposed carbon fibre finish.

GT3-Inspired Styling

Inspired by the purposeful appearance of the 992 GT3, these side skirts give Carrera and Targa models a more performance-focused look.

Their sculpted profile emphasises the 992's aerodynamic body shape and visually lowers the sides of the car, making them particularly effective when combined with other GT3-style or carbon fibre exterior upgrades.

Pre-Preg Autoclave Carbon Fibre

SFORZA manufactures the side skirts from high-quality pre-preg carbon fibre using an autoclave curing process.

The carbon is cured under controlled high temperature and pressure, producing a lightweight, strong and consistent component with the premium surface quality expected from a high-end carbon fibre upgrade.

Gloss Carbon Fibre Finish

The exposed carbon fibre weave is finished with a glossy clear coat, highlighting the depth and pattern of the carbon.

This finish complements other gloss carbon components fitted to the Porsche 992, including front spoilers, rear diffusers, mirror trim and aerodynamic components.

Direct Replacement Installation

The SFORZA side skirts are designed as direct replacements for the original factory side skirts rather than covers fitted over the existing components.

They utilise the existing factory mounting points and hardware, allowing installation without cutting, drilling or other permanent modifications.

Porsche 911 992 GT3-Style Carbon Fibre Side Skirts

SFORZA GT3-style carbon fibre side skirts provide Porsche 992 owners with an effective way to add a more aggressive, motorsport-inspired appearance while retaining the original mounting arrangement of the car.

Their pre-preg autoclave carbon fibre construction provides a premium lightweight alternative to the standard side skirts, while the exposed gloss carbon weave complements the contemporary styling of the 992 generation.

Suitable for Porsche 992 Carrera, Carrera S, Carrera T, Carrera 4S, Targa and GTS models, these replacement side skirts are particularly suited to cars fitted with other GT3-inspired carbon fibre exterior upgrades..

Carbon Fibre Outer Mirror Triangle Set 
Sold as a pair

Upgrade the exterior detailing of your Porsche 911 992 with the SFORZA Carbon Fibre Outer Mirror Triangle Set.

Fits:

• Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
• Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 3.0L 2020-24
• Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
• Porsche 992.1 Speedster 4.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
• Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.1 GT3 RS 4.0L 2022-24
• Porsche 992.1 (911) Sport Classic 3.8L 2023
• Porsche 992.1 (911) Dakar 3.0L 2023-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
• Porsche 992.2 Turbo 3.6L 2024>>
• Porsche 992.2 GT3 2025>>

Manufactured from high-quality pre-preg carbon fibre using an autoclave moulding process, these components replace the original left and right-hand outer mirror triangles while retaining an OEM-style fit.

Finished in a gloss clear coat to showcase the exposed carbon weave, they provide a subtle but distinctive carbon fibre upgrade that complements other exterior carbon components fitted to the Porsche 992.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA mirror triangles are manufactured using pre-preg carbon fibre cured under controlled temperature and pressure in an autoclave.

This manufacturing process produces lightweight, strong and consistent components with a high-quality surface finish, making it ideally suited to premium automotive carbon fibre parts.

Gloss Exposed Carbon Finish

Each mirror triangle features an exposed carbon fibre weave protected by a gloss clear coat.

The high-gloss finish highlights the depth and pattern of the carbon while providing a premium appearance that works particularly well alongside carbon fibre mirror housings, side sills, spoilers and other exterior components.

Direct Replacement Installation

Unlike carbon covers that are fitted over the existing trim, these SFORZA mirror triangles are designed as direct replacements for the original components.

They follow the original mounting and fitment arrangement for an OEM-style installation and clean, integrated appearance.

Porsche 911 992 Carbon Fibre Mirror Trim & Exterior Upgrades

Carbon fibre outer mirror triangles provide a subtle way to add exposed carbon detailing to the Porsche 911 992 without dramatically changing the original styling of the car.

The SFORZA replacement mirror triangles combine pre-preg autoclave carbon fibre construction with an OEM-style fit, making them ideal for Porsche 992 owners looking for a high-quality alternative to the original trim.

Their gloss exposed weave can be combined with carbon fibre mirror housings, side skirts, spoilers and other exterior components to create a coordinated carbon fibre package.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC992837307GT3

The product you are viewing cross references to these numbers

Carbon Fibre Rear Deck Lid Spoiler 

Enhance the rear of your Porsche 911 992 GT3 with the SFORZA Carbon Fibre Rear Deck Lid Spoiler, developed and manufactured in Italy using high-quality pre-preg carbon fibre.

Fits:

• Porsche 992.1 GT3 4.0L 2021-24
• Porsche 992.2 GT3 2025>>

Designed as a premium exterior upgrade, the spoiler combines lightweight carbon fibre construction with a distinctive exposed weave and high-gloss clear coat finish. It is ideal for owners looking to add further carbon detailing to their 992 GT3 while maintaining a high-quality, integrated appearance.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA rear deck lid spoiler is manufactured from 200gsm 2x2 twill pre-preg carbon fibre using an autoclave moulding process.

The carbon is cured under controlled high temperature and pressure, producing a strong, lightweight and consistent component with a high-quality surface finish.

This manufacturing process is particularly suited to premium automotive carbon fibre components where accurate construction and a clean visible weave are important.

Exposed 2x2 Carbon Fibre Weave

The 2x2 twill weave gives the spoiler the distinctive appearance associated with high-performance and motorsport carbon fibre components.

Rather than hiding the construction beneath paint, the carbon weave remains fully exposed, allowing the material itself to become part of the exterior styling.

Gloss Clear Coat Finish

A gloss clear coat provides a smooth, premium finish while highlighting the depth and pattern of the exposed carbon weave.

The gloss carbon appearance complements other carbon fibre exterior upgrades on the Porsche 992 GT3, making it particularly suitable for cars fitted with matching carbon side sills, aerodynamic components and trim.

Important TÜV / ABE Information

TÜV and ABE homologation or approval documents are not supplied with this product.

Additional approval or certification may be required for legal road use in certain countries, particularly Germany, Austria and Switzerland. Customers should check local regulations and approval requirements before purchasing or installing the spoiler for road use.

Porsche 992 GT3 Carbon Fibre Rear Spoilers

A carbon fibre rear deck lid spoiler provides a distinctive finishing touch to the Porsche 911 992 GT3, combining the appearance of exposed carbon with lightweight pre-preg construction.

SFORZA carbon fibre components are developed and manufactured in Italy using an autoclave production process, making them an excellent choice for Porsche owners looking for premium-quality exterior carbon upgrades.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT827939GT3

The product you are viewing cross references to these numbers

Carbon Fibre Side Sill Set – Sold as a Pair

Upgrade the side profile of your Porsche 911 992 GT3 or GT3 Touring with the SFORZA Carbon Fibre Side Sill Set, manufactured in Italy from high-quality pre-preg carbon fibre.

Fits:

• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.1 Touring 4.0L 2021-24
• Porsche 992.2 GT3 2025>>

Supplied as a left and right-hand pair, these carbon fibre side skirts directly replace the existing side sills, providing an OEM-style fit while adding the distinctive appearance of exposed carbon fibre.

Designed for both first and second-generation 992 GT3 models, including the GT3 Touring, they are an ideal upgrade for owners looking to introduce additional carbon fibre detailing while retaining the original lines of the car.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA side sills are manufactured from 2x2 twill 200gsm pre-preg carbon fibre using an autoclave moulding process.

During manufacture, the carbon fibre is cured under controlled high temperature and pressure. This production method provides excellent strength, consistency and surface quality while allowing the components to remain lightweight.

The visible 2x2 twill carbon weave provides the high-quality motorsport-inspired appearance expected from a premium carbon fibre upgrade.

Gloss Clear Coat Finish

Each side sill is finished with a gloss clear coat that highlights the carbon fibre weave while providing a smooth, premium appearance.

The gloss finish complements other exposed carbon fibre components fitted to the 992 GT3 and provides a more distinctive appearance compared with the standard side skirts.

Direct Replacement Installation

The SFORZA carbon fibre side sills are designed as replacements for the existing factory side skirts rather than covers fitted over the original components.

Their OEM-style fit allows them to integrate neatly with the original bodywork and retain the distinctive profile of the 992 GT3.

Material
2x2 twill 200gsm pre-preg carbon fibre, autoclave moulded.

Finish
Gloss clear coat.

Country of Manufacture
Italy (EU)

Porsche 992 GT3 & GT3 Touring Carbon Fibre Side Skirts

Carbon fibre side skirts provide an effective way to enhance the lower profile of the Porsche 992 GT3 while complementing other carbon fibre exterior components.

SFORZA side sills combine lightweight pre-preg carbon construction with an OEM-style replacement fit, making them suitable for owners looking for a high-quality alternative to the standard side skirts.

Designed for both 992 GT3 and GT3 Touring models, including MK1 and MK2 versions, the exposed 2x2 twill weave provides a distinctive motorsport-inspired finish without compromising the original body design.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Gloss Carbon Fibre Front Bonnet Hood 

Transform the front of your Porsche 992.1 GT3 with the SFORZA Carbon Fibre Front Bonnet Hood, combining premium Italian manufacturing with exposed carbon fibre and a finish designed to complement the motorsport character of the GT3.

Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

Manufactured in Italy from pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the bonnet features 200 g/m² 2x2 twill carbon fabric for a premium, consistent appearance.

The exterior surface is finished in a gloss clear coat to showcase the exposed carbon weave, while the interior skin receives a contrasting matte clear coat for a clean and purposeful finish on both sides of the panel.

Pre-Preg Autoclave Carbon Fibre Construction

SFORZA manufactures the bonnet using pre-preg carbon fibre and autoclave technology, a process widely associated with high-performance automotive and motorsport carbon components.

The result is a beautifully finished carbon fibre body panel designed specifically for the Porsche 992.1 GT3.

Gloss Exterior & Matte Carbon Interior

Unlike carbon fibre panels focused solely on exterior appearance, the SFORZA bonnet is finished on both surfaces.

The exterior receives a high-gloss clear coat that emphasises the depth and detail of the 2x2 twill carbon weave, creating a striking contrast against the painted bodywork of the 992 GT3.

On the underside, a matte clear coat provides a more technical and understated finish, maintaining the exposed carbon appearance when the bonnet is open.

Front Air Ducts

Please note that the front air ducts are not supplied with the SFORZA carbon fibre bonnet.

The original air ducts can be transferred from the factory bonnet during installation. Alternatively, replacement ducts can be purchased separately from Porsche if owners prefer to retain their complete original bonnet assembly.

Exterior finish: Gloss clear coat
Interior finish: Matte clear coat
Front air ducts: Not included

Professional installation by an experienced Porsche specialist or bodyshop is recommended to ensure correct alignment, transfer of the required components and final fitment.

Italian-Made Carbon Fibre for the Porsche 992 GT3

Manufactured in Italy to SFORZA's high quality standards, this bonnet is designed for Porsche owners looking to introduce a substantial exposed carbon fibre element to the front of their 992.1 GT3.

The 2x2 twill weave pairs particularly well with other carbon fibre exterior components, allowing owners to build a more cohesive carbon-focused specification across the car.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should confirm their local regulations before purchasing or installing the bonnet for road use.

Why Choose the SFORZA Carbon Fibre Bonnet?

For owners searching for a carbon fibre bonnet for the Porsche 992.1 GT3, the SFORZA bonnet combines pre-preg autoclave construction with premium exposed carbon detailing and Italian manufacturing.

Key advantages include:

• Porsche 992.1 GT3-specific application
• Pre-preg autoclave carbon construction
• Premium 2x2 twill weave
• Gloss exposed carbon exterior
• Matte carbon interior
• Approximate 6.3kg varnished weight
• Original air ducts can be transferred
• Manufactured in Italy
• Dramatic motorsport-inspired appearance  

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT823021GT3

The product you are viewing cross references to these numbers

SFORZA Extended Swan Neck Rear Wing Risers in Carbon Fibre – Sold as a Pair

Give the rear aero package of your Porsche 992.1 GT3 a more aggressive, GT3 Cup-inspired appearance with the SFORZA Extended Carbon Fibre Swan Neck Rear Wing Risers.         

Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

Developed and manufactured in Italy, these extended risers raise the rear wing approximately 7cm compared with the original Porsche GT3 metallic wing risers. The increased height creates a significantly more purposeful motorsport stance while being designed to increase aerodynamic load over the rear axle.

Manufactured from pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the risers combine functional aerodynamic intent with the striking appearance of exposed carbon fibre.

GT3 Cup-Inspired Swan Neck Design

Inspired by the rear wing configuration of the Porsche GT3 Cup, the SFORZA extended risers reposition the wing approximately 7cm higher than the standard GT3 setup.

The elevated position gives the 992.1 GT3 a more track-focused appearance while allowing the rear wing to operate in a different airflow position, with the design intended to increase aerodynamic loading over the rear axle.

Combined with their exposed carbon fibre construction, the risers provide a substantial visual upgrade over the standard metallic components.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA swan neck risers are manufactured in Italy from 200 g/m² 2x2 twill pre-preg carbon fibre and autoclave moulded under high temperature and pressure.

A gloss clear coat completes the components, showcasing the exposed carbon weave and creating a premium finish that complements other carbon fibre components fitted to the Porsche 992 GT3.

Compatible with OEM & SFORZA GT3 Rear Wings

One of the key advantages of the SFORZA Extended Swan Neck Risers is their versatility.

They can be fitted with the original Porsche 992.1 GT3 rear wing, allowing owners to retain the factory wing blade while adding the increased height and exposed carbon construction of the SFORZA risers.

Alternatively, they can be combined with the SFORZA Extended Carbon Fibre Rear Wing to create a complete, more aggressive carbon fibre rear aero package.

Neither configuration requires modification to the compatible rear wing.

Extended Carbon Wing Risers for Porsche 992 GT3

For owners searching for extended Porsche 992 GT3 wing risers, the SFORZA design provides a combination of GT3 Cup-inspired styling, exposed carbon fibre construction and increased rear wing height.

The 7cm increase creates a noticeably more aggressive silhouette than the standard Porsche GT3 metallic risers, making these an ideal choice for owners developing a track-inspired or carbon-focused 992.1 GT3.

Approximate set weight: 2,300g

Professional installation is recommended to ensure correct assembly, alignment and fitment.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should check the applicable local regulations before purchasing or installing the components for road use.

Why Choose SFORZA Carbon Fibre Swan Neck Risers?

The SFORZA Extended Swan Neck Risers provide more than a cosmetic replacement for the standard Porsche components. Their GT3 Cup-inspired design raises the wing approximately 7cm and is intended to increase rear axle aerodynamic loading while giving the 992.1 GT3 a significantly more purposeful motorsport appearance.

With pre-preg autoclave carbon construction, exposed 2x2 twill weave and compatibility with both OEM and SFORZA rear wings, they provide a premium upgrade for the Porsche 992 GT3 rear aero package.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT827465466GT3

The product you are viewing cross references to these numbers

SFORZA Extended Carbon Fibre Rear Wing Without End Plates - 22cm

Take the aerodynamic presence of the Porsche 992.1 GT3 to the next level with the SFORZA Extended Carbon Fibre Rear Wing, developed and manufactured in Italy as a more aggressive and functional alternative to the standard GT3 rear wing.
                     
Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

The SFORZA wing width is extended by 22cm compared with the OEM Porsche 992 GT3 wing. The increased span is designed to generate greater aerodynamic load over the rear axle, contributing to improved stability at higher speeds while creating a significantly more purposeful motorsport-inspired appearance.

Manufactured from premium pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the wing combines lightweight construction, excellent structural quality and a beautifully finished exposed carbon weave.

Pre-Preg Autoclave Carbon Fibre Construction

SFORZA manufactures the extended GT3 rear wing in Italy using 200 g/m² 2x2 twill carbon fibre fabric and pre-preg autoclave technology.

The finished component receives a gloss clear coat that showcases the exposed carbon weave and provides the premium appearance expected from a high-quality carbon fibre upgrade for the Porsche 992 GT3.

22cm Extended Wing Profile

The defining feature of the SFORZA rear wing is its increased width. At 22cm wider than the standard OEM Porsche GT3 wing, the extended profile provides both a significant visual transformation and a functional aerodynamic benefit.

The larger wing surface is designed to increase aerodynamic loading on the rear axle, helping improve high-speed stability. Visually, the additional width creates a stronger track-focused stance that suits the motorsport character of the 992.1 GT3.

OEM GT3 Riser Compatibility

Despite its increased dimensions, the SFORZA Extended Carbon Fibre Rear Wing has been engineered to fit directly onto the original Porsche 992 GT3 wing risers without modification.

For owners looking to develop the appearance further, the wing can also be combined with optional SFORZA extended carbon fibre wing risers, creating a more comprehensive carbon fibre rear aero package.

Aerodynamic Upgrade for the Porsche 992.1 GT3

The Porsche 992 GT3 already features an aerodynamically focused exterior, and the SFORZA extended rear wing builds on this foundation with a larger carbon fibre wing profile.

For owners looking for a Porsche 992 GT3 extended rear wing, track-inspired carbon fibre spoiler or a more aggressive alternative to the OEM GT3 wing, the SFORZA design combines functional aerodynamic intent with premium Italian carbon fibre construction.

Professional installation is recommended to ensure correct assembly, alignment and fitment.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should confirm applicable local regulations before purchasing or installing the component for road use.

Why Choose the SFORZA Extended GT3 Rear Wing?

The SFORZA Extended Carbon Fibre Rear Wing is designed for Porsche 992.1 GT3 owners looking for more than a purely cosmetic carbon fibre replacement.

Its 22cm extended profile delivers a significantly more aggressive appearance while being designed to increase rear axle aerodynamic loading and improve high-speed stability. Combined with pre-preg autoclave construction, exposed 2x2 twill carbon and OEM riser compatibility, it creates a premium aerodynamic upgrade for the 992 GT3.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT825872GT3

The product you are viewing cross references to these numbers

SFORZA Carbon Fibre Front Fender Louver Covers 

Enhance the aggressive motorsport styling of your Porsche 991.2 GT3 RS or GT2 RS with the SFORZA Carbon Fibre Front Fender Louver Covers.

Fits:

• Porsche 991.2 GT3 RS 4.0L (520 Bhp) 2017-19
• Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19

Designed specifically to cover the original plastic front fender louvers, these premium carbon fibre components introduce a high-quality exposed carbon finish to one of the most distinctive aerodynamic features of the RS models. The result is a sharper, more sophisticated appearance that complements other factory or aftermarket carbon fibre exterior components.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA front fender louver covers are manufactured from pre-preg carbon fibre using an autoclave moulding and curing process. This premium manufacturing technique delivers excellent surface quality, accurate construction and the crisp detailing expected from a high-end carbon fibre component.

Each cover is completed with a glossy clear coat, highlighting the carbon weave while providing a deep, premium finish.

Carbon Fibre Upgrade for the 991.2 GT3 RS & GT2 RS

The distinctive front wing louvers are an integral part of the purposeful appearance of the Porsche 991.2 GT3 RS and GT2 RS. The SFORZA covers retain the original design while replacing the visual appearance of the standard plastic surface with exposed carbon fibre.

This makes them an ideal upgrade for owners looking to create a more cohesive carbon fibre exterior package, particularly on cars already equipped with carbon mirrors, bonnet components, rear aero parts or other carbon fibre detailing.

Installation

The SFORZA carbon fibre louver covers are designed to install directly over the original plastic fender louvers rather than replacing them.

Installation requires suitable automotive adhesive, which is not supplied with the product. Correct positioning and adhesive application are important to achieving a secure, clean and professional result.

Due to the installation method, fitting should be carried out by a knowledgeable professional with previous experience installing bonded automotive components and working with appropriate adhesives.

Why Choose SFORZA Carbon Fibre Fender Louver Covers?

For Porsche owners looking for carbon fibre front fender louver covers for the 991.2 GT3 RS or GT2 RS, these SFORZA components provide a premium visual upgrade while retaining the underlying factory components.

Their pre-preg autoclave carbon fibre construction and gloss clear coat finish provide the high-quality appearance expected on Porsche's most focused RS models.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC99150352324GT3RS

The product you are viewing cross references to these numbers

Carbon Fibre Rear Wing End Plates – Sold as a Pair

Enhance one of the most distinctive aerodynamic features of your Porsche 911 992 GT3 with the SFORZA Carbon Fibre Rear Wing End Plates. Supplied as a pair for the left and right sides, these premium carbon fibre components directly replace the original rear wing end plates for a sharper, more motorsport-inspired appearance.

Fits:

• Porsche 992.1 GT3 4.0L 2021-24
• Porsche 992.2 GT3 2025>>

Manufactured from pre-preg carbon fibre and autoclave moulded under controlled high temperature and pressure, the SFORZA end plates combine lightweight construction with excellent strength, dimensional consistency and premium surface quality.

Each end plate is completed with a gloss clear coat that enhances the depth and definition of the carbon weave while providing a high-quality exterior finish.

Designed to work with both the original Porsche 992 GT3 rear wing and the SFORZA augmented rear wing, these end plates provide a versatile upgrade whether refreshing the factory wing or completing a more comprehensive SFORZA aerodynamic package.

What Do Rear Wing End Plates Do?

Rear wing end plates form the vertical outer sections at either end of the GT3 rear wing.

In addition to being an important visual element of the wing assembly, end plates help define the outer boundaries of airflow around the wing. On a performance car such as the Porsche 992 GT3, they form an integral part of the rear wing's overall aerodynamic design.

Their functions include:

• Completing the rear wing assembly
• Managing airflow around the outer edges of the wing
• Contributing to the wing's aerodynamic profile
• Providing a distinctive motorsport-inspired appearance
• Creating an opportunity to introduce exposed carbon fibre to the rear of the car

Why Upgrade to SFORZA Carbon Fibre End Plates?

The prominent position of the rear wing makes the end plates an ideal area for a premium carbon fibre upgrade.

Replacing the standard components with SFORZA pre-preg carbon fibre end plates introduces a more technical and motorsport-influenced finish while retaining compatibility with the original GT3 wing.

Benefits include:

• Premium pre-preg carbon fibre construction
• Autoclave moulded at high temperature and pressure
• Lightweight construction
• Gloss clear-coated finish
• Direct replacement for the OEM end plates
• Compatible with the factory Porsche 992 GT3 rear wing
• Compatible with the SFORZA augmented rear wing
• Supplied as a complete LH and RH pair

Installation

The SFORZA rear wing end plates are designed as replacements for the original Porsche components.

Installation follows the same adhesive-style fitment principle as the OEM end plates, with adhesive tape supplied for installation.

This allows the carbon components to integrate cleanly with the existing rear wing without altering the overall character of the GT3 wing assembly.

When Should Rear Wing End Plates Be Replaced or Upgraded?

Replacement or upgrading may be desirable when:

• The original end plates are scratched or cosmetically damaged
• Adding exposed carbon fibre exterior components
• Creating a more distinctive GT3 rear-end appearance
• Installing a SFORZA augmented rear wing
• Building a coordinated carbon fibre aerodynamic package
• Refreshing the appearance of an existing OEM GT3 rear wing

For many owners, the upgrade is primarily about combining the functional design of the GT3 rear wing with the premium appearance of exposed pre-preg carbon fibre.

Porsche 992 GT3 Carbon Fibre Rear Wing Upgrades

The rear wing is one of the defining design and aerodynamic features of the Porsche 911 992 GT3. Upgrading the wing end plates to exposed carbon fibre provides a subtle but immediately recognisable way to personalise the car while retaining the original GT3 design language.

SFORZA Porsche 992 GT3 carbon fibre wing end plates are manufactured using pre-preg carbon and autoclave moulding, making them particularly suitable for owners seeking premium carbon components rather than purely cosmetic overlays.

Their compatibility with both the OEM Porsche 992 GT3 rear wing and SFORZA augmented wing also makes them suitable for anything from a subtle factory-wing enhancement to a more comprehensive Porsche 992 GT3 carbon aero conversion.

Benefits of SFORZA Porsche 992 GT3 Carbon Aero Components

• Premium carbon fibre appearance
• Pre-preg manufacturing process
• Autoclave moulded construction
• Designed specifically for Porsche applications
• Compatible with factory GT3 components
• Ideal for OEM+ and motorsport-inspired builds
• Complements other Porsche 992 carbon fibre exterior upgrades       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC9GT827867868

The product you are viewing cross references to these numbers

Carbon fibre front bonnet hood with Weissach style N.A.C.A air vents



Fits:
Porsche 981 Cayman, Boxster, S, GTS, GT4, Spyder
Porsche 911 991 Carrera (all models), GT3, GT3RS, Turbo

Great solutions as replacement and to enhance the racing spirit while considerably reducing car weight.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC911511011

The product you are viewing cross references to these numbers

Carbon fibre front bonnet hood with Weissach style N.A.C.A air vents



Fits:
Porsche 981 Cayman, Boxster, S, GTS, GT4, Spyder
Porsche 911 991 Carrera (all models), GT3, GT3RS, Turbo

Great solutions as replacement and to enhance the racing spirit while considerably reducing car weight.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC911511011

The product you are viewing cross references to these numbers

Carbon fibre rear Spoiler Ducktail GT4 Style.
Manufactured in Carbon Fibre prepreg autoclave molded at high temperature & pressure, twill 2×2 200 gr. cured with clearcote gloss finish.



Fits:
Porsche 981 Cayman 2013-15

Replaces the oem upper Spoiler. Install along with the oem lower Spoiler support with existent screws & clips. ( not supplied)


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC98150424103

The product you are viewing cross references to these numbers

Carbon fibre rear Spoiler Ducktail GT4 Style.
Manufactured in Carbon Fibre prepreg autoclave molded at high temperature & pressure, twill 2×2 200 gr. cured with clearcote gloss finish.



Fits:
Porsche 981 Boxster 2012-15

Replaces the oem upper Spoiler. Install along with the oem lower Spoiler support with existent screws & clips. ( not supplied)


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC98150424111

The product you are viewing cross references to these numbers

Carbon fibre rear Spoiler Ducktail GT4 Style.
Manufactured in Carbon Fiber prepreg autoclave molded, cured with glossy clear finish.



Fits:
Porsche 718 Cayman

Replaces the oem upper Spoiler. Install with original oem inferior Spoiler with existent screws & clips. ( not included).


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC982827934EG2X

The product you are viewing cross references to these numbers