do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Porsche
Fabspeed
Fabspeed for Porsche
Here at Fabspeed Motorsport, we are dedicated to delivering our customers the highest quality performance upgrades with the industry’s best lifetime warranty. We have over 29 years experience designing, engineering and installing high performance Porsche exhaust systems, air intake systems and ECU tuning for the world’s most coveted exotic cars. All of our products are designed and engineered right here in Fort Washington, Pennsylvania by our very skilled and passionate fabricators
A Quick Look at Fabspeed
Fabspeed information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Fabspeed is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these parts include upgrading tired or corroded factory exhaust components, tailoring sound and response for fast-road or track use, and supporting wider tuning packages.
- Common symptoms that lead owners to inspect or change related parts include exhaust leaks, rattles, drone, heat-related fatigue, and loss of performance that may also be linked to boost or vacuum issues.
- After installation, it is sensible to refresh mounts and hardware where worn, and to carry out a careful check for leaks once everything has heat-cycled.
- Consider whether supporting ECU mapping or health checks are appropriate for your Porsche, depending on how extensive your hardware changes are.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Tuning — Engine tuning parts and upgrades for Porsche are used to improve drivability, throttle response and power, or to support changes such as intake, exhaust, or forced induction. They are typically chosen once the engine is in good health, as tuning cannot compensate for underlying mechanical faults.
- Before any significant tuning work, check overall engine condition, including compression or leak-down where appropriate, fuel system health, sensor data, and that there are no boost or vacuum leaks.
- Avoid using calibration changes to hide rough running or misfires, as the mechanical root cause still needs to be addressed.
Air Filters — Air filters for Porsche protect the engine from dirt while maintaining the airflow that correct fuelling and performance depend on. Owners often replace or upgrade filters to restore airflow, support tuning work, or improve serviceability while keeping good filtration.
- Service intervals depend on use: dusty environments or frequent track days may justify more frequent inspection and cleaning or replacement.
- If using oiled performance filters, follow the manufacturer’s oiling instructions carefully to avoid contaminating sensitive airflow sensors.
Air Induction Kits — Induction kits for Porsche replace or re-route parts of the intake system to change airflow, response and sound. They are usually part of a wider tuning package and are selected to balance intake temperatures, flow and sensor stability.
- When fitting an induction kit, ensure joints and connections are well sealed to prevent unmetered air entering the engine or causing drivability issues.
- Positioning and heat management are important: shielding from hot engine-bay air helps keep intake temperatures, and therefore performance, more consistent.
Exhausts — Exhaust upgrades for Porsche are commonly chosen to replace corroded or leaking factory systems, refine the car’s sound, reduce weight or improve gas flow as part of a tuning package. The right choice depends on how the car is used and the balance you want between sound, comfort and responsiveness.
- When planning an exhaust change, consider the complete system, including catalytic converters, to keep within your local emissions and noise requirements.
- Replacing aged gaskets, clamps, mounts and rusted fixings at the same time as the exhaust usually improves fitment and reduces the chance of future leaks or rattles.
All Silencers / Mufflers — This category covers a range of Porsche silencer and muffler layouts, from standard-style replacements to sport and valved options. Selection is usually guided by corrosion or damage to existing parts, unwanted noise or drone, or a desire to change the exhaust character while staying within comfort and usage needs.
- To narrow down the correct layout, compare inlet and outlet positions, hanger locations and pipe diameters on your current system against the product details.
- When choosing between standard, sport or switchable systems, think about typical journeys and cabin noise tolerance so you end up with a sound level that suits day-to-day use.
Explore Fabspeed at Design911
View the current Fabspeed range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
The Fabspeed Porsche 911 Turbo 930 Wastegate Dump Pipe is a lightweight, motorsport-inspired performance exhaust component designed for classic Porsche 911 Turbo (930) models.
Fits:
Developed by Fabspeed Motorsport, this wastegate discharge pipe replaces the original, heavier factory wastegate muffler with a freer-flowing stainless steel outlet.
Manufactured from premium T304L stainless steel, the Fabspeed Wastegate Dump Pipe is engineered to withstand the high exhaust temperatures, vibration and demanding operating conditions associated with turbocharged engines.
The design takes inspiration from the wastegate exhaust arrangements used on Porsche factory racing cars, providing a more direct route for gases released through the turbocharger's external wastegate.
During turbocharger operation, the wastegate regulates boost pressure by diverting a controlled amount of exhaust gas away from the turbine. The factory wastegate muffler helps reduce the noise produced by this discharge.
The Fabspeed Wastegate Dump Pipe replaces that silenced arrangement with a short, open exhaust outlet, producing a more noticeable and aggressive wastegate sound when the valve opens.
Its direct bolt-on construction is designed to simplify installation on compatible Porsche 930 wastegate assemblies without requiring cutting or welding.
The stainless steel construction also offers improved resistance to corrosion compared with ageing exhaust components that may have suffered from repeated heat cycles and environmental exposure.
This product is particularly suited to Porsche 930 enthusiasts seeking a more authentic motorsport exhaust character and a lightweight alternative to the factory wastegate muffler.
Important: The Wastegate Dump Pipe is a performance sound and exhaust-flow upgrade. It does not replace the wastegate valve, actuator or boost-control mechanism and does not itself increase the engine's specified boost pressure.
The open-discharge design can produce extremely loud exhaust noise when the wastegate operates. It is best suited to competition applications where the resulting noise and emissions configuration are permitted.
What This Product Does:
The Fabspeed Wastegate Dump Pipe provides an exhaust outlet for gases diverted through the turbocharger's external wastegate.
The wastegate is a key part of the Porsche 930 turbocharging system. Its role is to help control turbine speed and boost pressure by regulating the amount of exhaust gas passing through the turbocharger.
When the wastegate opens, some exhaust gas is diverted away from the turbine. The dump pipe carries these gases away from the wastegate outlet.
Its key functions and benefits include:
- Wastegate Exhaust Discharge: Provides an outlet for gases released through the external wastegate.
- Reduced Discharge Restriction: Replaces the factory wastegate muffler with a more direct exhaust path.
- Enhanced Wastegate Sound: Produces a louder, more aggressive exhaust note when the wastegate opens.
- Motorsport-Inspired Character: Recreates the distinctive wastegate discharge sound associated with classic turbocharged competition cars.
- Lightweight Construction: Removes the bulk of the original wastegate muffler arrangement.
- Durable Stainless Steel Design: T304L stainless steel provides resistance to corrosion and high exhaust temperatures.
- Direct Bolt-On Installation: Designed to replace the factory wastegate muffler on compatible vehicles.
- Improved Exhaust Simplicity: Provides a straightforward outlet arrangement without the original silencing chamber.
- Turbocharger System Compatibility: Works with the existing wastegate discharge system without replacing the wastegate itself.
- Distinctive Turbocharged Driving Experience: Makes wastegate operation more audible during high-load and boost conditions.
- Competition Exhaust Styling: Provides a race-inspired exhaust configuration for classic Porsche 930 builds.
Symptoms Of Wear Or Failure:
The Fabspeed Wastegate Dump Pipe is primarily a motorsport performance upgrade rather than a routine maintenance replacement.
However, deterioration of the original wastegate muffler or discharge pipe may make replacement necessary.
Common signs of wear or damage include:
1. Corrosion on the Factory Wastegate Muffler
The original muffler is exposed to high exhaust temperatures, moisture and repeated heating and cooling cycles.
Over time, corrosion can weaken the outer housing, joints or mounting connections.
Advanced rust may eventually cause exhaust leaks or structural failure.
2. Exhaust Leaks Around the Wastegate Outlet
Damaged gaskets, cracked pipework or loose connections may allow exhaust gases to escape before reaching the intended outlet.
Possible symptoms include blowing noises, visible soot deposits and unusual exhaust smells.
3. Rattling from the Wastegate Muffler
Internal corrosion or damage may cause components inside the original muffler to loosen.
This can produce metallic rattling or vibration when the wastegate opens.
4. Cracked or Damaged Discharge Pipe
Repeated thermal expansion, vibration and mechanical stress can cause cracks to develop around exhaust connections.
Visible cracking or exhaust leakage may indicate that repair or replacement is required.
5. Damaged Mounting Flange
Warped, corroded or cracked mounting flanges may prevent the muffler or discharge pipe from sealing correctly.
6. Loose or Corroded Fasteners
Heat exposure and ageing can cause exhaust fasteners to seize, corrode or loosen.
A poor connection may allow unwanted movement or exhaust leakage.
7. Excessive Exhaust Vibration
Loose mounting components or damaged connections can cause the factory wastegate muffler to vibrate against surrounding parts.
8. Visible Impact Damage
Damage caused by road debris, improper lifting or previous repairs may deform the wastegate discharge assembly.
9. Blocked or Restricted Discharge Path
A damaged or obstructed wastegate outlet may interfere with normal exhaust discharge.
Any suspected restriction should be investigated promptly because wastegate flow is important to proper boost-pressure regulation.
10. Unusual Turbocharger or Boost Behaviour
Inconsistent boost pressure, boost spikes or overboost conditions can indicate a problem within the wider wastegate or boost-control system.
However, these symptoms should not automatically be attributed to the wastegate muffler or dump pipe.
They may result from a sticking wastegate valve, damaged diaphragm, incorrect boost spring, faulty pressure hoses or other turbocharging faults.
Why Replacement / Upgrading Matters:
- Maintaining the condition of the wastegate discharge system is important for correct turbocharger operation, exhaust integrity and overall vehicle safety.
- The Porsche 911 Turbo 930 uses a turbocharger to increase engine performance by using exhaust gas energy to compress intake air.
- The external wastegate helps regulate turbocharger boost by diverting some exhaust gas away from the turbine when the required operating conditions are reached.
- The wastegate's discharge system must allow these gases to escape through the intended exhaust route.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Porsche 911 Turbo 930 Muffler Bypass Zork Tube is a motorsport-inspired performance exhaust upgrade designed for Porsche 911 Turbo (930) models manufactured between 1976 and 1989.
Fits:
- Porsche 911 1976-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Developed by Fabspeed Motorsport, this high-flow exhaust component replaces the factory rear muffler arrangement with a short, large-diameter exhaust outlet that connects directly to the turbocharger and exits beneath the rear bumper.
Inspired by the exhaust configuration of the legendary Porsche 934 IMSA racing car, the Zork Tube delivers an aggressive competition exhaust sound while reducing exhaust restriction downstream of the turbocharger.
Manufactured from high-quality T304 stainless steel, the tube features precision mandrel-bent construction, 3.0-inch (76 mm) diameter tubing and an integrated angle-cut exhaust outlet.
Its lightweight design weighs less than 5 lb (approximately 2.3 kg), making it a significantly lighter alternative to a conventional rear muffler arrangement.
By reducing exhaust backpressure, the Fabspeed Zork Tube is designed to improve exhaust gas flow, enhance turbocharger response and deliver a more immediate, engaging driving experience.
Fabspeed advertises performance gains of up to 46 wheel horsepower and 65 lb-ft of torque, based on testing under specific vehicle and environmental conditions.
The Zork Tube also produces an exceptionally loud and distinctive exhaust note, allowing the characteristic turbocharger whistle, spool-up sounds and air-cooled flat-six exhaust character to become more pronounced.
Unlike a conventional sports muffler, this component prioritises exhaust flow, lightweight construction and competition performance rather than sound suppression.
The direct-fit design allows the tube to bolt to the compatible factory turbocharger outlet, providing a straightforward solution for enthusiasts building a Porsche 930 with a historic racing-inspired exhaust configuration.
Ideal for dedicated motorsport vehicles, competition preparation and track-focused Porsche 930 projects, the Fabspeed Zork Tube combines lightweight stainless steel construction with unmistakable Porsche racing heritage.
Important: This is an extremely loud competition-style exhaust product. It is not intended as a conventional road-going muffler replacement and must only be used where applicable emissions and noise regulations permit.
What This Product Does:
The Fabspeed Zork Tube provides a short, direct exhaust route from the turbocharger to the rear of the vehicle.
By eliminating the conventional rear muffler arrangement, it allows exhaust gases to exit through a substantially less restrictive pipe.
Its key functions and benefits include:
- Reduced Exhaust Backpressure: Removes the flow restriction associated with the original rear muffler arrangement.
- Improved Exhaust Gas Flow: Provides a large-diameter outlet for exhaust gases leaving the turbocharger.
- Enhanced Turbocharger Response: Reduced downstream restriction may help the turbocharger respond more quickly.
- Reduced Turbo Lag: Fabspeed markets the Zork Tube as a performance solution designed to improve turbocharger response.
- Increased Horsepower Potential: Manufacturer-advertised gains of up to 46 wheel horsepower under the tested conditions.
- Improved Torque Potential: Manufacturer-advertised gains of up to 65 lb-ft.
- Aggressive Motorsport Exhaust Sound: Produces a loud, unsilenced exhaust note inspired by Porsche competition cars.
- Enhanced Turbocharger Whistle: Makes turbocharger spool-up and operating sounds more noticeable.
- Lightweight Exhaust Design: Weighs less than 5 lb, reducing the weight of the replacement exhaust section.
- Large-Diameter Tubing: Uses 3.0-inch (76 mm) tubing for high-flow exhaust routing.
- Durable Stainless Steel Construction: T304 stainless steel provides resistance to corrosion and high exhaust temperatures.
- Mandrel-Bent Pipework: Helps maintain consistent tubing diameter and smooth exhaust flow.
- Historic Motorsport Styling: Features a Porsche 934 IMSA-inspired exhaust arrangement.
- Direct Bolt-On Installation: Connects to the appropriate turbocharger outlet without requiring a conventional rear muffler.
Symptoms Of Wear Or Failure:
The Fabspeed Zork Tube is primarily a motorsport performance upgrade rather than a standard replacement or fault-repair component.
However, owners may consider replacing or refurbishing original exhaust components when deterioration, damage or excessive restriction has been identified.
Common symptoms include:
1. Exhaust Corrosion
The original exhaust muffler and associated pipework may develop corrosion due to moisture, road salt and repeated heating and cooling cycles.
Advanced corrosion can weaken the metal and lead to exhaust leaks or mounting failures.
2. Exhaust Leaks
Cracked exhaust sections, damaged flanges or deteriorated gaskets may allow exhaust gases to escape before reaching the intended outlet.
Symptoms can include blowing noises, visible soot deposits and exhaust fumes.
3. Internal Muffler Damage
Ageing exhaust mufflers can develop loose internal baffles or deteriorated components.
This may produce rattling, metallic noises or unwanted changes in exhaust sound.
4. Restricted Exhaust Flow
A damaged or obstructed exhaust component may increase backpressure and affect the engine's ability to expel exhaust gases.
Severe restrictions can influence turbocharger operation and engine performance.
5. Reduced Turbocharger Response
Excessive downstream exhaust restriction may contribute to slower turbocharger response.
However, poor boost response may also be caused by boost leaks, wastegate faults, turbocharger wear or incorrect engine tuning.
6. Damaged Exhaust Mountings
Corroded brackets, damaged fasteners or weakened mounting points may allow the exhaust to move excessively.
This can lead to vibration, rattling or unwanted contact with surrounding bodywork.
7. Excessive Exhaust Vibration
Loose exhaust connections or damaged mountings can produce unusual vibration, particularly during acceleration and changes in engine speed.
8. Visible Exhaust Damage
Impact damage, crushed pipework or distorted mounting flanges may compromise the integrity of the original exhaust system.
9. Exhaust Fumes or Unusual Odours
An exhaust leak may allow harmful gases to escape near the engine compartment or passenger cabin.
Any suspected exhaust leak should be investigated immediately because exhaust gases can contain carbon monoxide.
10. Deteriorated Exhaust Connections
Damaged sealing surfaces, corroded turbocharger fasteners or worn gaskets may prevent secure exhaust connections.
Why Replacement / Upgrading Matters:
- Upgrading to the Fabspeed Zork Tube provides a distinctive competition-focused exhaust configuration for the Porsche 911 Turbo 930.
- The original Porsche exhaust system was designed to balance engine performance, noise control, emissions requirements and everyday usability.
- For dedicated motorsport applications, a shorter and less restrictive exhaust path may offer performance and weight-saving advantages.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TZMB
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Porsche C2 Turbo / 965 / 964 Turbo Muffler Bypass IMSA Zork Tube is a competition-inspired performance exhaust upgrade designed for Porsche 911 Turbo models manufactured between 1990 and 1994.
Fits:
- Porsche 964 (911) TURBO 3.3L 1990-94
- Porsche 964 (911) TURBO 3.6L 1990-94
Developed by Fabspeed Motorsport, this high-flow exhaust component recreates the distinctive short exhaust outlet design associated with the legendary Porsche 934 IMSA and Le Mans racing cars of the late 1970s.
The IMSA Zork Tube replaces the original restrictive rear exhaust arrangement with a short, large-diameter outlet that directs exhaust gases away from the turbocharger with minimal downstream restriction.
Its design is intended to deliver maximum exhaust sound, improved turbocharger response and a dramatic motorsport-inspired driving experience.
Manufactured with 3.0-inch (76 mm) exhaust tubing, the Fabspeed Zork Tube features an integrated angle-cut outlet that can be adjusted to achieve the correct position beneath the rear bumper.
By reducing exhaust restrictions after the turbocharger, this system is designed to improve exhaust gas evacuation and allow the turbocharger to respond more freely.
Fabspeed advertises performance gains of up to 46 wheel horsepower and 65 lb-ft of torque, based on its published testing. Actual results depend on engine condition, vehicle specification, existing modifications and operating conditions.
One of the most distinctive features of this product is its sound. The Zork Tube creates an exceptionally loud, aggressive exhaust character, with pronounced turbocharger whistle, spool-up sounds, crackles, pops and exhaust burbles.
Unlike a conventional sports muffler, the IMSA Zork Tube prioritises exhaust flow and sound over noise reduction.
The direct-fit design uses four mounting nuts at the turbocharger connection and an adjustable slip-joint outlet, allowing straightforward installation on a compatible exhaust configuration.
The Fabspeed IMSA Zork Tube is ideally suited to Porsche 964 Turbo and 965 owners preparing vehicles for track days, motorsport events or dedicated competition use.
What This Product Does:
The Fabspeed IMSA Zork Tube provides a short, high-flow exhaust route from the turbocharger towards the rear of the vehicle.
Instead of passing exhaust gases through the standard rear muffler arrangement, the Zork Tube allows them to exit through a substantially less restrictive pipe.
Its key functions and benefits include:
- Reduced Exhaust Backpressure: Provides a freer-flowing outlet after the turbocharger.
- Improved Exhaust Gas Flow: Uses 3.0-inch (76 mm) tubing to support efficient exhaust evacuation.
- Enhanced Turbocharger Response: Reduced downstream restriction may help the turbocharger build boost more readily.
- Increased Performance Potential: Fabspeed advertises gains of up to 46 wheel horsepower and 65 lb-ft of torque.
- Aggressive Race-Inspired Sound: Produces an extremely loud exhaust note inspired by historic Porsche competition cars.
- Pronounced Turbo Whistle: Makes turbocharger spool-up and operating sounds considerably more noticeable.
- Exhaust Crackles and Pops: Allows more combustion-related exhaust sounds to be heard.
- Direct Exhaust Routing: Minimises the complexity and length of the downstream exhaust path.
- Reduced Exhaust System Weight: Eliminates heavier original exhaust components where replaced by the tube, although Fabspeed does not publish a confirmed weight-saving figure for this product.
- Adjustable Outlet Position: Features an angle-cut outlet with a slip-joint adjustment.
- Motorsport Appearance: Recreates the distinctive short exhaust arrangement associated with Porsche 934 IMSA race cars.
- Straightforward Installation: Designed to attach directly to the compatible turbocharger outlet arrangement.
- Reversible Modification: Allows original components to be retained and refitted when required.
Symptoms Of Wear Or Failure:
The Fabspeed IMSA Zork Tube is primarily a performance and motorsport upgrade, rather than a routine replacement for a worn exhaust component.
However, owners may consider replacing or refurbishing their original exhaust system when it shows signs of damage or deterioration.
- Older mufflers and exhaust pipes can develop corrosion following prolonged exposure to moisture, road salt and repeated temperature changes.
- Severe corrosion may weaken the exhaust housing, joints and mounting points.
- Cracked pipework, failed gaskets or damaged connections can allow exhaust gases to escape before reaching the intended outlet.
- Symptoms may include blowing noises, increased exhaust volume and visible soot around leaking joints.
- Internal baffles or other components inside an ageing muffler may become loose or damaged.
- This can produce metallic rattling, unusual vibrations or changes in exhaust sound.
- Damaged or obstructed exhaust components may restrict gas flow, increasing exhaust backpressure.
- Severe restriction can affect engine output and turbocharger operating conditions.
- A severely restricted exhaust system may contribute to slower boost response or reduced engine performance.
- However, these symptoms can also result from turbocharger wear, boost leaks, wastegate faults or other engine problems.
- Corroded fasteners, fractured brackets or deteriorated supports may allow unwanted exhaust movement.
- This can produce rattling, vibration or contact with surrounding bodywork.
- Impact damage, crushed sections or deformed pipework can compromise the structural condition of the original exhaust.
- Loose connections or failed supports may allow the exhaust system to move beyond its intended position.
- A leaking exhaust may allow fumes to escape near the engine compartment or vehicle body.
- Exhaust leaks should be investigated promptly because exhaust gases can contain dangerous carbon monoxide.
- Corrosion or deformation around flange connections may prevent the exhaust from sealing correctly.
Why Replacement / Upgrading Matters:
- Upgrading to the Fabspeed IMSA Zork Tube offers a distinctive motorsport-focused exhaust configuration for Porsche 964 Turbo and 965 models.
- The original Porsche exhaust system was engineered to balance performance, exhaust noise, emissions control and normal road usability.
- For dedicated competition vehicles, a shorter and less restrictive exhaust outlet may provide benefits where motorsport regulations permit its use.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR964TZMB
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Porsche 964 Turbo / 965 / C2 Turbo Cat Bypass Pipe is a high-performance stainless steel exhaust component developed for Porsche 911 Turbo models manufactured between 1990 and 1994.
Fits:
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Designed by Fabspeed Motorsport, this competition exhaust pipe replaces the original Porsche catalytic converter with a freer-flowing exhaust connection between the K27 turbocharger and the factory secondary muffler.
Manufactured from premium 14–16 gauge T304L stainless steel, the bypass pipe features CNC mandrel-bent tubing and a 3.0-inch (76 mm) diameter to support efficient exhaust gas flow.
Its design incorporates a four-bolt flange connection and follows the concept of Porsche's original racing exhaust components.
By replacing the restrictive factory catalytic converter, the Fabspeed bypass pipe is designed to reduce exhaust backpressure downstream of the turbocharger, improve exhaust gas flow and enhance the distinctive sound of the turbocharged air-cooled flat-six engine.
The freer-flowing arrangement allows more of the turbocharger's characteristic whistle and spool-up sound to be heard, creating a more pronounced sports car exhaust character.
Fabspeed describes the system as producing an engaging exhaust note without becoming excessively loud when used with the compatible original rear muffler arrangement.
The bypass pipe is designed as a direct bolt-on replacement, allowing the original catalytic converter to be retained separately and refitted when required.
Its stainless steel construction provides resistance to corrosion and thermal deterioration, making it suitable for demanding competition environments.
The product is intended for owners of Porsche 964 Turbo and 965 vehicles seeking a dedicated competition exhaust configuration rather than a standard road-going catalytic converter replacement.
Important: This product removes the factory catalytic converter and is intended exclusively for closed-course motorsport and off-road applications where permitted. It must not be used on public roads.
What This Product Does:
The Fabspeed Cat Bypass Pipe replaces the factory catalytic converter with a straight-through, high-flow exhaust section.
Its primary function is to reduce exhaust restriction after the turbocharger, supporting freer exhaust gas movement towards the remaining exhaust system.
Its main functions and benefits include:
- Improved Exhaust Gas Flow: Replaces the factory catalytic converter with a less restrictive exhaust passage.
- Reduced Exhaust Backpressure: Helps reduce resistance to exhaust gases downstream of the turbocharger.
- Enhanced Turbocharger Sound: Makes turbo spool-up and whistle more noticeable.
- Improved Performance Potential: Reduced exhaust restriction may support improved power delivery under suitable operating conditions.
- Throttle Response Potential: A less restrictive exhaust arrangement may influence turbocharger response, although results depend on the engine and overall configuration.
- Sportier Exhaust Character: Produces a more pronounced turbocharged flat-six exhaust sound.
- Large-Diameter Tubing: Features 3.0-inch (76 mm) exhaust tubing.
- Smooth Exhaust Routing: CNC mandrel-bent construction helps maintain consistent tube geometry through bends.
- Durable Construction: T304L stainless steel provides corrosion resistance and suitability for high exhaust temperatures.
- Competition-Oriented Design: Based on the concept of Porsche factory racing exhaust components.
- Direct Bolt-On Fitment: Uses the original-style mounting arrangement without requiring permanent modification to the vehicle.
- Reversible Installation: Allows the original catalytic converter to be reinstalled when returning the vehicle to its road-approved configuration.
Symptoms Of Wear Or Failure:
The Fabspeed Cat Bypass Pipe is primarily a competition performance upgrade, not a standard maintenance replacement.
However, deterioration of the original catalytic converter or surrounding exhaust components may prompt owners to inspect or repair the existing system.
Common symptoms of catalytic converter or exhaust system problems include:
1. Reduced Engine Performance
A damaged or restricted catalytic converter may create excessive exhaust backpressure, potentially reducing engine performance.
Possible signs include sluggish acceleration, reduced power under load and difficulty maintaining normal performance at higher engine speeds.
2. Restricted Exhaust Flow
A physically damaged or obstructed catalytic converter may prevent exhaust gases from passing through the system normally.
In severe cases, this can affect the performance of a turbocharged engine.
3. Metallic Rattling from the Exhaust
An ageing catalytic converter may develop damaged or loose internal components.
These can produce rattling or metallic noises, particularly during acceleration or changes in engine speed.
4. Visible Corrosion
Older exhaust components may develop rust or corrosion due to moisture, road salt and repeated heating and cooling.
Severe deterioration can weaken pipework, joints and mounting points.
5. Exhaust Leaks
Cracked components, deteriorated gaskets or damaged flange connections may allow exhaust gases to escape.
Symptoms can include unusual blowing noises, increased exhaust volume and escaping fumes.
6. Unusual Exhaust Smells
Changes in exhaust odour may indicate catalytic converter deterioration, an exhaust leak or an underlying engine combustion problem.
The cause should be diagnosed before replacing components.
7. Excessive Exhaust Heat
An internally restricted catalytic converter can contribute to abnormal temperature conditions within the exhaust system.
Severe overheating may damage surrounding components and should be investigated promptly.
8. Damaged Mounting Connections
Corroded fasteners, damaged flanges or deteriorated exhaust mountings may compromise the security of the original catalytic converter.
9. Poor Turbocharger Response
Excessive exhaust restriction can affect turbocharger operating conditions.
However, reduced boost response may also be caused by turbocharger wear, boost leaks, wastegate faults or fuel and ignition problems.
10. Visible Impact Damage
Ground clearance issues, road debris or previous accidents may damage the original catalytic converter or adjacent exhaust pipework.
Why Replacement / Upgrading Matters:
- Maintaining a correctly functioning exhaust system is important for engine performance, turbocharger operation, structural integrity and vehicle safety.
- On the Porsche 964 Turbo and 965, exhaust gases pass through the turbocharger before flowing into the downstream exhaust system.
- The factory catalytic converter reduces harmful exhaust emissions while also forming part of the original exhaust routing.
- In competition applications, a catalytic converter bypass may be used to reduce downstream exhaust restriction where permitted by motorsport regulations.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR964TCB
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake and ECU tuning upgrade developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
- ECU Tune
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake and a Fabspeed XperTune ECU performance upgrade.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
For owners seeking additional performance optimisation, Fabspeed offers its XperTune ECU performance software as a selectable option.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Sharper Throttle Response: The coordinated intake, exhaust and optional ECU upgrades are intended to improve engine responsiveness.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Optimised Engine Management: XperTune software provides revised ECU calibration for the appropriate vehicle configuration.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGEC
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake and ECU tuning upgrade developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
- ECU Tune
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake and a Fabspeed XperTune ECU performance upgrade.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
For owners seeking additional performance optimisation, Fabspeed offers its XperTune ECU performance software as a selectable option.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Sharper Throttle Response: The coordinated intake, exhaust and optional ECU upgrades are intended to improve engine responsiveness.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Optimised Engine Management: XperTune software provides revised ECU calibration for the appropriate vehicle configuration.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGEB
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake and ECU tuning upgrade developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
- ECU Tune
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake and a Fabspeed XperTune ECU performance upgrade.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
For owners seeking additional performance optimisation, Fabspeed offers its XperTune ECU performance software as a selectable option.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Sharper Throttle Response: The coordinated intake, exhaust and optional ECU upgrades are intended to improve engine responsiveness.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Optimised Engine Management: XperTune software provides revised ECU calibration for the appropriate vehicle configuration.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGEP
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGC
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGB
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 970 Panamera S Performance Package is a comprehensive exhaust, air intake developed specifically for Porsche Panamera S 4.8L V8 models manufactured between 2010 and 2013.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)~
- Resonator Bypass X-Pipe
- Competition Air Intake
Designed by Fabspeed Motorsport, this package combines premium performance components to improve exhaust flow, enhance engine breathing, sharpen throttle response and deliver a deeper, more distinctive sports exhaust note.
The package includes a Maxflo Performance Exhaust System with Deluxe Quad Style Tips, a Resonator Bypass X-Pipe, a Competition Air Intake.
Together, these components are designed to reduce restrictions within the factory intake and exhaust arrangements, allowing the naturally aspirated 4.8-litre V8 engine to deliver a more engaging driving experience.
The exhaust system is manufactured using high-quality 14–16 gauge T304 stainless steel, with mandrel-bent tubing designed to promote smooth exhaust gas flow and reduce unnecessary backpressure.
Fabspeed's high-flow X-pipe configuration replaces the factory resonator section, helping improve exhaust flow while producing a more pronounced V8 exhaust character.
The Maxflo mufflers are designed to deliver a sportier exhaust note, while the Competition Air Intake supports improved airflow into the engine.
Unlike replacing an individual worn component, this package provides a coordinated performance solution for improving several aspects of the Porsche Panamera S driving experience.
Ideal for performance enthusiasts, exhaust system refurbishment and owners seeking a more responsive and distinctive V8 sports saloon, the Fabspeed Performance Package combines durable construction with performance-focused engineering.
What This Product Does:
The Fabspeed Performance Package upgrades the intake and exhaust systems of the Porsche 970 Panamera S to improve the engine's breathing characteristics, exhaust sound and driving response.
Its key functions and benefits include:
- Improved Exhaust Flow: The Maxflo mufflers and Resonator Bypass X-Pipe are engineered to reduce restrictions in the exhaust system.
- Reduced Backpressure: High-flow pipework helps minimise unnecessary resistance to outgoing exhaust gases.
- Enhanced V8 Exhaust Sound: Produces a deeper, sportier exhaust note than the standard system.
- Improved Intake Airflow: The Competition Air Intake is designed to support a less restrictive supply of air to the engine.
- Increased Performance Potential: Supports improved horsepower and torque output, depending on the selected configuration and vehicle condition.
- Durable Stainless Steel Construction: T304 stainless steel offers good resistance to corrosion and heat-related deterioration.
- High-Flow X-Pipe Design: Helps manage exhaust gas flow through the centre section while modifying the exhaust sound.
- Coordinated Performance Modifications: Combines complementary intake, exhaust and tuning components in one package.
- Enhanced Driving Experience: Designed to make the naturally aspirated V8 engine feel and sound more engaging.
Symptoms Of Wear Or Failure:
The Fabspeed Performance Package is primarily a performance upgrade rather than a standard replacement or fault-repair kit.
However, owners may consider replacing the original exhaust or intake components when they show signs of deterioration, damage or reduced effectiveness.
- Corrosion on Exhaust Components: Rust or deteriorated metalwork may affect the condition of the original mufflers or exhaust pipework.
- Exhaust Leaks: Cracked pipes, failed joints or damaged seals may allow exhaust gases to escape.
- Unusual Exhaust Noises: Rattling, blowing or metallic noises can indicate damaged exhaust components.
- Deteriorated Muffler Internals: Worn or damaged internal sections may cause unwanted rattling or changes in exhaust sound.
- Loose Exhaust Mountings: Damaged mounting components may allow excessive movement or vibration.
- Visible Exhaust Damage: Impact marks, cracks or distorted pipework may indicate that replacement is necessary.
- Exhaust Fumes: Leaks may allow gases to escape from unintended locations, requiring prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the intake and exhaust systems of the Porsche Panamera S can enhance the vehicle's performance character, driving responsiveness and exhaust sound.
- The original Porsche Panamera S 4.8L V8 engine combines naturally aspirated performance with the refinement expected from a premium sports saloon.
- The factory intake and exhaust systems are engineered to balance performance, noise control, emissions compliance and everyday comfort.
- For owners seeking a more pronounced sports car character, the Fabspeed Performance Package offers an integrated solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970SSPKGP
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
The Fabspeed Porsche 911 Carrera 3.2 Sport Performance Package is a comprehensive exhaust, air intake and optional engine tuning upgrade designed for Porsche 911 Carrera 3.2 models manufactured between 1984 and 1989.
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Kit Includes:
- Dual-Outlet Maxflo Performance Exhaust System
- Sport Catalytic Converter
- High Performance Airbox Cover
- BMC F1 Performance Air Filter
Developed by Fabspeed Motorsport, this performance package combines a high-flow Maxflo exhaust system, upgraded exhaust pipework, a performance airbox cover and a BMC F1 air filter to enhance the driving characteristics of the classic air-cooled Porsche flat-six engine.
The package is designed to improve exhaust gas flow, reduce intake restrictions, enhance throttle response and produce a more distinctive sports exhaust note.
The Maxflo exhaust system is constructed using high-quality T304L stainless steel tubing, offering corrosion resistance and durability under demanding operating conditions.
Actual performance improvements depend on the selected package configuration, engine condition, fuel quality, installation and operating conditions.
The Fabspeed Sport Performance Package is particularly suited to Porsche 911 Carrera 3.2 enthusiasts seeking improved engine responsiveness, a more engaging exhaust sound and a coordinated performance upgrade rather than purchasing individual components separately.
What This Product Does:
The Fabspeed Sport Performance Package upgrades several components that influence how the Porsche 911 Carrera 3.2 engine takes in air, expels exhaust gases and responds to driver inputs.
Its main functions and benefits include:
- Improved Exhaust Flow: Reduces restrictions within the selected exhaust system components.
- Enhanced Engine Breathing: Combines intake and exhaust upgrades to support more efficient airflow through the engine.
- Increased Performance Potential: Fabspeed advertises gains of up to 24 hp with the appropriate complete exhaust and DME upgrade configuration.
- Improved Torque Response: The complete configured package is advertised with gains of up to 22 lb-ft of torque.
- Sharper Throttle Response: Designed to make the engine feel more responsive to accelerator input.
- Sportier Exhaust Sound: Produces a deeper, more pronounced sports exhaust note.
- Reduced Exhaust System Weight: Advertised weight saving of approximately 17 lb (8 kg).
- Improved Intake Airflow: The CUP airbox cover and BMC F1 filter help reduce intake restriction.
- Durable Exhaust Construction: T304L stainless steel provides resistance to corrosion and thermal deterioration.
- Coordinated Performance Upgrade: Combines complementary components in one package.
The Fabspeed Sport Performance Package is primarily a performance upgrade rather than a routine replacement or repair kit.
However, owners may consider upgrading when the original exhaust or intake system shows signs of ageing, deterioration or reduced performance.
Common symptoms associated with worn or damaged factory components include:
Exhaust System Symptoms
- Excessive Exhaust Corrosion: Rust around the original muffler, pipework or joints may weaken the exhaust system.
- Exhaust Leaks: Damaged joints, cracks or deteriorated connections may cause escaping exhaust gases.
- Unusual Exhaust Noises: Rattling, blowing sounds or metallic vibrations may indicate damage to the original exhaust.
- Deteriorated Exhaust Muffler: Internal corrosion or loose internal components may produce unwanted rattling or changes in exhaust sound.
- Visible Exhaust Damage: Impacts, damaged brackets or cracked pipework can affect the condition of the original system.
- Exhaust Fumes Around the Vehicle: Leaks can allow exhaust gases to escape from unintended locations and require prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the original intake and exhaust system can provide a more engaging driving experience while allowing owners to replace ageing components with modern performance-oriented alternatives.
- The Porsche 911 Carrera 3.2 is known for its naturally aspirated air-cooled flat-six engine, distinctive exhaust character and mechanical driving feel.
- The original exhaust and intake systems were engineered to balance performance, noise, emissions requirements and everyday usability.
- The Fabspeed Sport Performance Package is designed for owners seeking a more performance-focused configuration.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911SSPKG32D
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
The Fabspeed Porsche 911 Carrera 3.2 Sport Performance Package is a comprehensive exhaust, air intake and optional engine tuning upgrade designed for Porsche 911 Carrera 3.2 models manufactured between 1984 and 1989.
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Kit Includes:
- Single-Outlet Maxflo Performance Exhaust System
- Sport Catalytic Converter
- High Performance Airbox Cover
- BMC F1 Performance Air Filter
Developed by Fabspeed Motorsport, this performance package combines a high-flow Maxflo exhaust system, upgraded exhaust pipework, a performance airbox cover and a BMC F1 air filter to enhance the driving characteristics of the classic air-cooled Porsche flat-six engine.
The package is designed to improve exhaust gas flow, reduce intake restrictions, enhance throttle response and produce a more distinctive sports exhaust note.
The Maxflo exhaust system is constructed using high-quality T304L stainless steel tubing, offering corrosion resistance and durability under demanding operating conditions.
Actual performance improvements depend on the selected package configuration, engine condition, fuel quality, installation and operating conditions.
The Fabspeed Sport Performance Package is particularly suited to Porsche 911 Carrera 3.2 enthusiasts seeking improved engine responsiveness, a more engaging exhaust sound and a coordinated performance upgrade rather than purchasing individual components separately.
What This Product Does:
The Fabspeed Sport Performance Package upgrades several components that influence how the Porsche 911 Carrera 3.2 engine takes in air, expels exhaust gases and responds to driver inputs.
Its main functions and benefits include:
- Improved Exhaust Flow: Reduces restrictions within the selected exhaust system components.
- Enhanced Engine Breathing: Combines intake and exhaust upgrades to support more efficient airflow through the engine.
- Increased Performance Potential: Fabspeed advertises gains of up to 24 hp with the appropriate complete exhaust and DME upgrade configuration.
- Improved Torque Response: The complete configured package is advertised with gains of up to 22 lb-ft of torque.
- Sharper Throttle Response: Designed to make the engine feel more responsive to accelerator input.
- Sportier Exhaust Sound: Produces a deeper, more pronounced sports exhaust note.
- Reduced Exhaust System Weight: Advertised weight saving of approximately 17 lb (8 kg).
- Improved Intake Airflow: The CUP airbox cover and BMC F1 filter help reduce intake restriction.
- Durable Exhaust Construction: T304L stainless steel provides resistance to corrosion and thermal deterioration.
- Coordinated Performance Upgrade: Combines complementary components in one package.
The Fabspeed Sport Performance Package is primarily a performance upgrade rather than a routine replacement or repair kit.
However, owners may consider upgrading when the original exhaust or intake system shows signs of ageing, deterioration or reduced performance.
Common symptoms associated with worn or damaged factory components include:
Exhaust System Symptoms
- Excessive Exhaust Corrosion: Rust around the original muffler, pipework or joints may weaken the exhaust system.
- Exhaust Leaks: Damaged joints, cracks or deteriorated connections may cause escaping exhaust gases.
- Unusual Exhaust Noises: Rattling, blowing sounds or metallic vibrations may indicate damage to the original exhaust.
- Deteriorated Exhaust Muffler: Internal corrosion or loose internal components may produce unwanted rattling or changes in exhaust sound.
- Visible Exhaust Damage: Impacts, damaged brackets or cracked pipework can affect the condition of the original system.
- Exhaust Fumes Around the Vehicle: Leaks can allow exhaust gases to escape from unintended locations and require prompt investigation.
Why Replacement / Upgrading Matters:
- Upgrading the original intake and exhaust system can provide a more engaging driving experience while allowing owners to replace ageing components with modern performance-oriented alternatives.
- The Porsche 911 Carrera 3.2 is known for its naturally aspirated air-cooled flat-six engine, distinctive exhaust character and mechanical driving feel.
- The original exhaust and intake systems were engineered to balance performance, noise, emissions requirements and everyday usability.
- The Fabspeed Sport Performance Package is designed for owners seeking a more performance-focused configuration.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911SSPKG32S
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
The Fabspeed Porsche 970 Panamera GTS Performance Package is a comprehensive high-performance exhaust, intake and engine tuning upgrade designed to enhance the exhaust sound, horsepower, torque, throttle response and overall driving experience of the Porsche Panamera GTS.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)
- Resonator Bypass X-Pipe
- BMC F1 Replacement Air Filter
- ECU Tune
Developed specifically for the naturally aspirated 4.8-litre V8 engine, this performance package combines Fabspeed's Maxflo Performance Exhaust System, Resonator Bypass X-Pipe and BMC F1 Performance Air Filter, with an available XperTune ECU software upgrade.
By reducing restrictions within the original exhaust system and supporting improved intake airflow, the package is designed to help the engine breathe more efficiently, delivering a sportier exhaust character and potentially improving engine responsiveness.
The exhaust components are manufactured from premium 14–16 gauge T304 stainless steel, featuring mandrel-bent tubing engineered to improve exhaust gas flow, reduce unnecessary backpressure and provide excellent corrosion resistance.
The Resonator Bypass X-Pipe replaces the original centre resonator section with a performance-oriented configuration, producing a deeper, more aggressive exhaust note that complements the character of the naturally aspirated V8.
Designed as a bolt-on upgrade, the package can be fitted without cutting or welding when installed on a compatible factory exhaust arrangement.
Ideal for Porsche Panamera GTS owners seeking enhanced sports car sound, improved exhaust efficiency and a more engaging driving experience, this Fabspeed package offers an integrated performance solution.
What This Product Does:
The Fabspeed Panamera GTS Performance Package is designed to improve exhaust gas flow, reduce intake and exhaust restrictions and enhance engine performance when combined with an appropriate ECU calibration.
Its key functions include:
- Improved Exhaust Gas Flow: The Maxflo mufflers and Resonator Bypass X-Pipe provide a less restrictive exhaust path compared with the original system.
- Sportier Exhaust Sound: Produces a deeper, more aggressive exhaust note that enhances the character of the naturally aspirated V8.
- Reduced Exhaust Backpressure: The performance exhaust components help reduce unnecessary resistance to exhaust gas flow.
- Improved Engine Responsiveness: Reduced restrictions can contribute to more responsive engine behaviour.
- Increased Horsepower Potential: Improved airflow and compatible ECU tuning may support additional engine power.
- Enhanced Torque Delivery: Suitable performance calibration can help optimise torque characteristics and acceleration.
- Improved Throttle Response: The available ECU software upgrade can refine engine response to accelerator inputs.
- High-Performance Air Filtration: The BMC F1 Replacement Air Filter supports efficient airflow while helping protect the engine against airborne contaminants.
- Improved Exhaust Durability: T304 stainless steel construction provides excellent resistance to rust and corrosion.
- Reduced Exhaust Restriction: The high-flow X-Pipe design supports efficient exhaust gas discharge.
- Premium Exhaust Appearance: Deluxe Quad Style Tips provide a sporty finish, with multiple appearance options.
- Integrated Performance Upgrade: Combines compatible exhaust, intake and tuning components within one package.
The Fabspeed Porsche Panamera GTS Performance Package is primarily a performance upgrade rather than a replacement for one specific failed component.
However, deterioration of the original exhaust or intake system may indicate that maintenance, repair or upgrading is beneficial.
Common signs include:
- Reduced Engine Performance: Restricted exhaust flow, intake contamination or underlying engine faults may contribute to reduced power and acceleration.
- Sluggish Throttle Response: Intake restrictions, sensor faults or other engine management problems can cause delayed acceleration.
- Corroded Exhaust Components: Original exhaust pipes, mufflers and fittings can develop corrosion through exposure to moisture, road salt and temperature changes.
- Exhaust Leaks: Cracked exhaust pipes, damaged welds or deteriorated gaskets may allow exhaust gases to escape.
- Excessive Exhaust Rattling: Damaged muffler internals, loose brackets or worn mountings may produce metallic noises.
- Restricted Air Filter: A dirty or clogged filter can reduce intake airflow and affect engine responsiveness.
- Damaged Muffler Components: Internal deterioration or structural damage may change the exhaust sound and compromise the system.
- Increased Exhaust Backpressure: Internal obstructions or collapsed exhaust components may restrict gas flow and reduce engine performance.
- Unusual Exhaust Noise: Unexpected changes in exhaust tone, excessive noise or metallic vibrations may indicate damage.
- Poor Acceleration: Intake, exhaust, ignition or fuelling problems can contribute to reduced engine performance.
- Excessive Exhaust Movement: Worn mounting hardware can allow the exhaust assembly to move or vibrate excessively.
- Damaged Exhaust Tips: Corrosion, impact damage or deformation may affect the appearance and alignment of the exhaust outlets.
- Engine Management Warning Light: Faults involving engine sensors, exhaust monitoring or combustion may trigger diagnostic warnings.
Why Replacement / Upgrading Matters:
- Upgrading the factory exhaust and intake system with the Fabspeed Porsche 970 Panamera GTS Performance Package provides an opportunity to enhance the vehicle's exhaust sound, responsiveness and overall driving experience.
- The Porsche Panamera GTS features a naturally aspirated 4.8-litre V8 engine known for its distinctive character and responsive power delivery.
- The original exhaust system is designed to balance sound, performance, emissions requirements and everyday driving refinement. Performance-oriented exhaust components can change this balance by reducing restriction and producing a more pronounced sports exhaust note.
- The Fabspeed Maxflo Performance Mufflers and Resonator Bypass X-Pipe are engineered to improve exhaust gas flow while enhancing the sound of the naturally aspirated V8.
- The increased exhaust character provides a more engaging driving experience, particularly during acceleration and higher engine speeds.
- Improved exhaust flow may also support engine responsiveness, especially when combined with an appropriate ECU calibration.
- The BMC F1 Performance Air Filter complements the exhaust modifications by supporting efficient intake airflow while maintaining filtration of airborne contaminants.
- When selected, the XperTune software upgrade allows the engine management calibration to be optimised for the specified vehicle configuration, providing further potential improvements in power delivery and throttle response.
- For vehicles retaining ageing original exhaust components, the package also offers an opportunity to replace mufflers and pipework affected by corrosion, structural deterioration or unwanted vibration.
- The T304 stainless steel construction provides durability and resistance to corrosion, helping maintain the condition of the exhaust components over time.
- The Deluxe Quad Style Exhaust Tips also enhance the appearance of the rear of the vehicle, allowing owners to choose a finish that complements their preferred styling.
- For Porsche enthusiasts undertaking performance modifications or exhaust refurbishment, upgrading related components together provides an integrated approach to improving sound and exhaust efficiency.
- The Fabspeed Porsche 970 Panamera GTS Performance Package combines premium stainless steel construction, vehicle-specific engineering and performance-oriented design to deliver a comprehensive upgrade for the Porsche Panamera GTS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970GTSSPKGEB
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
The Fabspeed Porsche 970 Panamera GTS Performance Package is a comprehensive high-performance exhaust, intake and engine tuning upgrade designed to enhance the exhaust sound, horsepower, torque, throttle response and overall driving experience of the Porsche Panamera GTS.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)
- Resonator Bypass X-Pipe
- BMC F1 Replacement Air Filter
- ECU Tune
Developed specifically for the naturally aspirated 4.8-litre V8 engine, this performance package combines Fabspeed's Maxflo Performance Exhaust System, Resonator Bypass X-Pipe and BMC F1 Performance Air Filter, with an available XperTune ECU software upgrade.
By reducing restrictions within the original exhaust system and supporting improved intake airflow, the package is designed to help the engine breathe more efficiently, delivering a sportier exhaust character and potentially improving engine responsiveness.
The exhaust components are manufactured from premium 14–16 gauge T304 stainless steel, featuring mandrel-bent tubing engineered to improve exhaust gas flow, reduce unnecessary backpressure and provide excellent corrosion resistance.
The Resonator Bypass X-Pipe replaces the original centre resonator section with a performance-oriented configuration, producing a deeper, more aggressive exhaust note that complements the character of the naturally aspirated V8.
Designed as a bolt-on upgrade, the package can be fitted without cutting or welding when installed on a compatible factory exhaust arrangement.
Ideal for Porsche Panamera GTS owners seeking enhanced sports car sound, improved exhaust efficiency and a more engaging driving experience, this Fabspeed package offers an integrated performance solution.
What This Product Does:
The Fabspeed Panamera GTS Performance Package is designed to improve exhaust gas flow, reduce intake and exhaust restrictions and enhance engine performance when combined with an appropriate ECU calibration.
Its key functions include:
- Improved Exhaust Gas Flow: The Maxflo mufflers and Resonator Bypass X-Pipe provide a less restrictive exhaust path compared with the original system.
- Sportier Exhaust Sound: Produces a deeper, more aggressive exhaust note that enhances the character of the naturally aspirated V8.
- Reduced Exhaust Backpressure: The performance exhaust components help reduce unnecessary resistance to exhaust gas flow.
- Improved Engine Responsiveness: Reduced restrictions can contribute to more responsive engine behaviour.
- Increased Horsepower Potential: Improved airflow and compatible ECU tuning may support additional engine power.
- Enhanced Torque Delivery: Suitable performance calibration can help optimise torque characteristics and acceleration.
- Improved Throttle Response: The available ECU software upgrade can refine engine response to accelerator inputs.
- High-Performance Air Filtration: The BMC F1 Replacement Air Filter supports efficient airflow while helping protect the engine against airborne contaminants.
- Improved Exhaust Durability: T304 stainless steel construction provides excellent resistance to rust and corrosion.
- Reduced Exhaust Restriction: The high-flow X-Pipe design supports efficient exhaust gas discharge.
- Premium Exhaust Appearance: Deluxe Quad Style Tips provide a sporty finish, with multiple appearance options.
- Integrated Performance Upgrade: Combines compatible exhaust, intake and tuning components within one package.
The Fabspeed Porsche Panamera GTS Performance Package is primarily a performance upgrade rather than a replacement for one specific failed component.
However, deterioration of the original exhaust or intake system may indicate that maintenance, repair or upgrading is beneficial.
Common signs include:
- Reduced Engine Performance: Restricted exhaust flow, intake contamination or underlying engine faults may contribute to reduced power and acceleration.
- Sluggish Throttle Response: Intake restrictions, sensor faults or other engine management problems can cause delayed acceleration.
- Corroded Exhaust Components: Original exhaust pipes, mufflers and fittings can develop corrosion through exposure to moisture, road salt and temperature changes.
- Exhaust Leaks: Cracked exhaust pipes, damaged welds or deteriorated gaskets may allow exhaust gases to escape.
- Excessive Exhaust Rattling: Damaged muffler internals, loose brackets or worn mountings may produce metallic noises.
- Restricted Air Filter: A dirty or clogged filter can reduce intake airflow and affect engine responsiveness.
- Damaged Muffler Components: Internal deterioration or structural damage may change the exhaust sound and compromise the system.
- Increased Exhaust Backpressure: Internal obstructions or collapsed exhaust components may restrict gas flow and reduce engine performance.
- Unusual Exhaust Noise: Unexpected changes in exhaust tone, excessive noise or metallic vibrations may indicate damage.
- Poor Acceleration: Intake, exhaust, ignition or fuelling problems can contribute to reduced engine performance.
- Excessive Exhaust Movement: Worn mounting hardware can allow the exhaust assembly to move or vibrate excessively.
- Damaged Exhaust Tips: Corrosion, impact damage or deformation may affect the appearance and alignment of the exhaust outlets.
- Engine Management Warning Light: Faults involving engine sensors, exhaust monitoring or combustion may trigger diagnostic warnings.
Why Replacement / Upgrading Matters:
- Upgrading the factory exhaust and intake system with the Fabspeed Porsche 970 Panamera GTS Performance Package provides an opportunity to enhance the vehicle's exhaust sound, responsiveness and overall driving experience.
- The Porsche Panamera GTS features a naturally aspirated 4.8-litre V8 engine known for its distinctive character and responsive power delivery.
- The original exhaust system is designed to balance sound, performance, emissions requirements and everyday driving refinement. Performance-oriented exhaust components can change this balance by reducing restriction and producing a more pronounced sports exhaust note.
- The Fabspeed Maxflo Performance Mufflers and Resonator Bypass X-Pipe are engineered to improve exhaust gas flow while enhancing the sound of the naturally aspirated V8.
- The increased exhaust character provides a more engaging driving experience, particularly during acceleration and higher engine speeds.
- Improved exhaust flow may also support engine responsiveness, especially when combined with an appropriate ECU calibration.
- The BMC F1 Performance Air Filter complements the exhaust modifications by supporting efficient intake airflow while maintaining filtration of airborne contaminants.
- When selected, the XperTune software upgrade allows the engine management calibration to be optimised for the specified vehicle configuration, providing further potential improvements in power delivery and throttle response.
- For vehicles retaining ageing original exhaust components, the package also offers an opportunity to replace mufflers and pipework affected by corrosion, structural deterioration or unwanted vibration.
- The T304 stainless steel construction provides durability and resistance to corrosion, helping maintain the condition of the exhaust components over time.
- The Deluxe Quad Style Exhaust Tips also enhance the appearance of the rear of the vehicle, allowing owners to choose a finish that complements their preferred styling.
- For Porsche enthusiasts undertaking performance modifications or exhaust refurbishment, upgrading related components together provides an integrated approach to improving sound and exhaust efficiency.
- The Fabspeed Porsche 970 Panamera GTS Performance Package combines premium stainless steel construction, vehicle-specific engineering and performance-oriented design to deliver a comprehensive upgrade for the Porsche Panamera GTS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970GTSSPKGEC
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
The Fabspeed Porsche 970 Panamera GTS Performance Package is a comprehensive high-performance exhaust, intake and engine tuning upgrade designed to enhance the exhaust sound, horsepower, torque, throttle response and overall driving experience of the Porsche Panamera GTS.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)
- Resonator Bypass X-Pipe
- BMC F1 Replacement Air Filter
- ECU Tune
Developed specifically for the naturally aspirated 4.8-litre V8 engine, this performance package combines Fabspeed's Maxflo Performance Exhaust System, Resonator Bypass X-Pipe and BMC F1 Performance Air Filter, with an available XperTune ECU software upgrade.
By reducing restrictions within the original exhaust system and supporting improved intake airflow, the package is designed to help the engine breathe more efficiently, delivering a sportier exhaust character and potentially improving engine responsiveness.
The exhaust components are manufactured from premium 14–16 gauge T304 stainless steel, featuring mandrel-bent tubing engineered to improve exhaust gas flow, reduce unnecessary backpressure and provide excellent corrosion resistance.
The Resonator Bypass X-Pipe replaces the original centre resonator section with a performance-oriented configuration, producing a deeper, more aggressive exhaust note that complements the character of the naturally aspirated V8.
Designed as a bolt-on upgrade, the package can be fitted without cutting or welding when installed on a compatible factory exhaust arrangement.
Ideal for Porsche Panamera GTS owners seeking enhanced sports car sound, improved exhaust efficiency and a more engaging driving experience, this Fabspeed package offers an integrated performance solution.
What This Product Does:
The Fabspeed Panamera GTS Performance Package is designed to improve exhaust gas flow, reduce intake and exhaust restrictions and enhance engine performance when combined with an appropriate ECU calibration.
Its key functions include:
- Improved Exhaust Gas Flow: The Maxflo mufflers and Resonator Bypass X-Pipe provide a less restrictive exhaust path compared with the original system.
- Sportier Exhaust Sound: Produces a deeper, more aggressive exhaust note that enhances the character of the naturally aspirated V8.
- Reduced Exhaust Backpressure: The performance exhaust components help reduce unnecessary resistance to exhaust gas flow.
- Improved Engine Responsiveness: Reduced restrictions can contribute to more responsive engine behaviour.
- Increased Horsepower Potential: Improved airflow and compatible ECU tuning may support additional engine power.
- Enhanced Torque Delivery: Suitable performance calibration can help optimise torque characteristics and acceleration.
- Improved Throttle Response: The available ECU software upgrade can refine engine response to accelerator inputs.
- High-Performance Air Filtration: The BMC F1 Replacement Air Filter supports efficient airflow while helping protect the engine against airborne contaminants.
- Improved Exhaust Durability: T304 stainless steel construction provides excellent resistance to rust and corrosion.
- Reduced Exhaust Restriction: The high-flow X-Pipe design supports efficient exhaust gas discharge.
- Premium Exhaust Appearance: Deluxe Quad Style Tips provide a sporty finish, with multiple appearance options.
- Integrated Performance Upgrade: Combines compatible exhaust, intake and tuning components within one package.
The Fabspeed Porsche Panamera GTS Performance Package is primarily a performance upgrade rather than a replacement for one specific failed component.
However, deterioration of the original exhaust or intake system may indicate that maintenance, repair or upgrading is beneficial.
Common signs include:
- Reduced Engine Performance: Restricted exhaust flow, intake contamination or underlying engine faults may contribute to reduced power and acceleration.
- Sluggish Throttle Response: Intake restrictions, sensor faults or other engine management problems can cause delayed acceleration.
- Corroded Exhaust Components: Original exhaust pipes, mufflers and fittings can develop corrosion through exposure to moisture, road salt and temperature changes.
- Exhaust Leaks: Cracked exhaust pipes, damaged welds or deteriorated gaskets may allow exhaust gases to escape.
- Excessive Exhaust Rattling: Damaged muffler internals, loose brackets or worn mountings may produce metallic noises.
- Restricted Air Filter: A dirty or clogged filter can reduce intake airflow and affect engine responsiveness.
- Damaged Muffler Components: Internal deterioration or structural damage may change the exhaust sound and compromise the system.
- Increased Exhaust Backpressure: Internal obstructions or collapsed exhaust components may restrict gas flow and reduce engine performance.
- Unusual Exhaust Noise: Unexpected changes in exhaust tone, excessive noise or metallic vibrations may indicate damage.
- Poor Acceleration: Intake, exhaust, ignition or fuelling problems can contribute to reduced engine performance.
- Excessive Exhaust Movement: Worn mounting hardware can allow the exhaust assembly to move or vibrate excessively.
- Damaged Exhaust Tips: Corrosion, impact damage or deformation may affect the appearance and alignment of the exhaust outlets.
- Engine Management Warning Light: Faults involving engine sensors, exhaust monitoring or combustion may trigger diagnostic warnings.
Why Replacement / Upgrading Matters:
- Upgrading the factory exhaust and intake system with the Fabspeed Porsche 970 Panamera GTS Performance Package provides an opportunity to enhance the vehicle's exhaust sound, responsiveness and overall driving experience.
- The Porsche Panamera GTS features a naturally aspirated 4.8-litre V8 engine known for its distinctive character and responsive power delivery.
- The original exhaust system is designed to balance sound, performance, emissions requirements and everyday driving refinement. Performance-oriented exhaust components can change this balance by reducing restriction and producing a more pronounced sports exhaust note.
- The Fabspeed Maxflo Performance Mufflers and Resonator Bypass X-Pipe are engineered to improve exhaust gas flow while enhancing the sound of the naturally aspirated V8.
- The increased exhaust character provides a more engaging driving experience, particularly during acceleration and higher engine speeds.
- Improved exhaust flow may also support engine responsiveness, especially when combined with an appropriate ECU calibration.
- The BMC F1 Performance Air Filter complements the exhaust modifications by supporting efficient intake airflow while maintaining filtration of airborne contaminants.
- When selected, the XperTune software upgrade allows the engine management calibration to be optimised for the specified vehicle configuration, providing further potential improvements in power delivery and throttle response.
- For vehicles retaining ageing original exhaust components, the package also offers an opportunity to replace mufflers and pipework affected by corrosion, structural deterioration or unwanted vibration.
- The T304 stainless steel construction provides durability and resistance to corrosion, helping maintain the condition of the exhaust components over time.
- The Deluxe Quad Style Exhaust Tips also enhance the appearance of the rear of the vehicle, allowing owners to choose a finish that complements their preferred styling.
- For Porsche enthusiasts undertaking performance modifications or exhaust refurbishment, upgrading related components together provides an integrated approach to improving sound and exhaust efficiency.
- The Fabspeed Porsche 970 Panamera GTS Performance Package combines premium stainless steel construction, vehicle-specific engineering and performance-oriented design to deliver a comprehensive upgrade for the Porsche Panamera GTS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970GTSSPKGEP
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
The Fabspeed Porsche 970 Panamera GTS Performance Package is a comprehensive high-performance exhaust, intake and engine tuning upgrade designed to enhance the exhaust sound, horsepower, torque, throttle response and overall driving experience of the Porsche Panamera GTS.
Fits:
- Porsche 970.1 Panamera S V8 4.8L 2010-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Kit Includes:
- Maxflo Performance Exhaust System (Including Deluxe Quad Style Tips)
- Resonator Bypass X-Pipe
- BMC F1 Replacement Air Filter
Developed specifically for the naturally aspirated 4.8-litre V8 engine, this performance package combines Fabspeed's Maxflo Performance Exhaust System, Resonator Bypass X-Pipe and BMC F1 Performance Air Filter.
By reducing restrictions within the original exhaust system and supporting improved intake airflow, the package is designed to help the engine breathe more efficiently, delivering a sportier exhaust character and potentially improving engine responsiveness.
The exhaust components are manufactured from premium 14–16 gauge T304 stainless steel, featuring mandrel-bent tubing engineered to improve exhaust gas flow, reduce unnecessary backpressure and provide excellent corrosion resistance.
The Resonator Bypass X-Pipe replaces the original centre resonator section with a performance-oriented configuration, producing a deeper, more aggressive exhaust note that complements the character of the naturally aspirated V8.
Designed as a bolt-on upgrade, the package can be fitted without cutting or welding when installed on a compatible factory exhaust arrangement.
Ideal for Porsche Panamera GTS owners seeking enhanced sports car sound, improved exhaust efficiency and a more engaging driving experience, this Fabspeed package offers an integrated performance solution.
What This Product Does:
The Fabspeed Panamera GTS Performance Package is designed to improve exhaust gas flow, reduce intake and exhaust restrictions and enhance engine performance when combined with an appropriate ECU calibration.
Its key functions include:
- Improved Exhaust Gas Flow: The Maxflo mufflers and Resonator Bypass X-Pipe provide a less restrictive exhaust path compared with the original system.
- Sportier Exhaust Sound: Produces a deeper, more aggressive exhaust note that enhances the character of the naturally aspirated V8.
- Reduced Exhaust Backpressure: The performance exhaust components help reduce unnecessary resistance to exhaust gas flow.
- Improved Engine Responsiveness: Reduced restrictions can contribute to more responsive engine behaviour.
- Increased Horsepower Potential: Improved airflow and compatible ECU tuning may support additional engine power.
- Enhanced Torque Delivery: Suitable performance calibration can help optimise torque characteristics and acceleration.
- High-Performance Air Filtration: The BMC F1 Replacement Air Filter supports efficient airflow while helping protect the engine against airborne contaminants.
- Improved Exhaust Durability: T304 stainless steel construction provides excellent resistance to rust and corrosion.
- Reduced Exhaust Restriction: The high-flow X-Pipe design supports efficient exhaust gas discharge.
- Integrated Performance Upgrade: Combines compatible exhaust, intake and tuning components within one package.
The Fabspeed Porsche Panamera GTS Performance Package is primarily a performance upgrade rather than a replacement for one specific failed component.
However, deterioration of the original exhaust or intake system may indicate that maintenance, repair or upgrading is beneficial.
Common signs include:
- Reduced Engine Performance: Restricted exhaust flow, intake contamination or underlying engine faults may contribute to reduced power and acceleration.
- Sluggish Throttle Response: Intake restrictions, sensor faults or other engine management problems can cause delayed acceleration.
- Corroded Exhaust Components: Original exhaust pipes, mufflers and fittings can develop corrosion through exposure to moisture, road salt and temperature changes.
- Exhaust Leaks: Cracked exhaust pipes, damaged welds or deteriorated gaskets may allow exhaust gases to escape.
- Excessive Exhaust Rattling: Damaged muffler internals, loose brackets or worn mountings may produce metallic noises.
- Restricted Air Filter: A dirty or clogged filter can reduce intake airflow and affect engine responsiveness.
- Damaged Muffler Components: Internal deterioration or structural damage may change the exhaust sound and compromise the system.
- Increased Exhaust Backpressure: Internal obstructions or collapsed exhaust components may restrict gas flow and reduce engine performance.
- Unusual Exhaust Noise: Unexpected changes in exhaust tone, excessive noise or metallic vibrations may indicate damage.
- Poor Acceleration: Intake, exhaust, ignition or fuelling problems can contribute to reduced engine performance.
- Excessive Exhaust Movement: Worn mounting hardware can allow the exhaust assembly to move or vibrate excessively.
- Damaged Exhaust Tips: Corrosion, impact damage or deformation may affect the appearance and alignment of the exhaust outlets.
- Engine Management Warning Light: Faults involving engine sensors, exhaust monitoring or combustion may trigger diagnostic warnings.
Why Replacement / Upgrading Matters:
- Upgrading the factory exhaust and intake system with the Fabspeed Porsche 970 Panamera GTS Performance Package provides an opportunity to enhance the vehicle's exhaust sound, responsiveness and overall driving experience.
- The Porsche Panamera GTS features a naturally aspirated 4.8-litre V8 engine known for its distinctive character and responsive power delivery.
- The original exhaust system is designed to balance sound, performance, emissions requirements and everyday driving refinement. Performance-oriented exhaust components can change this balance by reducing restriction and producing a more pronounced sports exhaust note.
- The Fabspeed Maxflo Performance Mufflers and Resonator Bypass X-Pipe are engineered to improve exhaust gas flow while enhancing the sound of the naturally aspirated V8.
- The increased exhaust character provides a more engaging driving experience, particularly during acceleration and higher engine speeds.
- Improved exhaust flow may also support engine responsiveness, especially when combined with an appropriate ECU calibration.
- The BMC F1 Performance Air Filter complements the exhaust modifications by supporting efficient intake airflow while maintaining filtration of airborne contaminants.
- For vehicles retaining ageing original exhaust components, the package also offers an opportunity to replace mufflers and pipework affected by corrosion, structural deterioration or unwanted vibration.
- The T304 stainless steel construction provides durability and resistance to corrosion, helping maintain the condition of the exhaust components over time.
- For Porsche enthusiasts undertaking performance modifications or exhaust refurbishment, upgrading related components together provides an integrated approach to improving sound and exhaust efficiency.
- The Fabspeed Porsche 970 Panamera GTS Performance Package combines premium stainless steel construction, vehicle-specific engineering and performance-oriented design to deliver a comprehensive upgrade for the Porsche Panamera GTS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970GTSSPKGB
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed