do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Wiesner Classic
Wiesner Classic for Porsche
Wiesner Classic parts for Porsche models from Design911.
A Quick Look at Wiesner Classic
Wiesner Classic information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Wiesner Classic is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant
- Typical reasons to choose these parts include keeping classic Porsche models on the road, sourcing hard-to-find components, improving originality, and completing restorations with correct details.
- Common age-related issues on older Porsche models include corrosion, brittle rubber, faded trim, worn bushings, and electrical gremlins, sometimes made worse by mixing incorrect model-year parts.
- Watch for symptoms such as poor cosmetic appearance, perished rubber, loose fittings, or intermittent electrical behaviour, especially after previous repairs or partial restorations.
- Confirm fitment on classic Porsche models by matching chassis code and model year, and by cross-checking part numbers against the original or trusted references.
- Where possible, replace seals, clips, and fixings while access is good; this helps avoid repeat strip-downs later.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Clothing & Gifts — Porsche-themed clothing and gifts let owners and enthusiasts show their passion off the road, or make ideal presents for fans of the marque.
Lifestyle — Explore a wide selection of Porsche lifestyle clothing, gifts, accessories, and everyday products designed to bring Porsche-inspired style and practicality into daily life.
Office & Home — Porsche-branded home and office accessories let you refresh décor and workspaces with functional pieces that reflect Porsche design and make versatile gift options.
Model Cars — Collectable Porsche model cars and diecast gifts allow enthusiasts to display favourite cars, celebrate Porsche heritage, and expand themed collections for home or office.
911 — Porsche 911 model cars focus on the brand’s flagship sports car, helping collectors build generation-specific or icon-themed 911 displays with detailed scale replicas.
Explore Wiesner Classic at Design911
View the current Wiesner Classic range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Fits:
Porsche 911 - 1978 to 1989
6 pin CDI Connector Housing for Porsche 911.
This is a high quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemical resistant. It is also an excellent insulator.
Please Note
Pins & wiring not included, this is only the empty housing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060270200
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 - 1965 to 1977
Porsche 914/6
3 pin CDI Connector Housing for Porsche 911.
This is a high quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemical resistant. It is also an excellent insulator.
Please Note
Pins & wiring not included, this is only the empty housing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160270201
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
This connector housing is made from PA12 Nylon which is an excellent insulator and known for its durability, high impact strength and resistance to heat and chemicals. It also won't become hard and brittle over time. Ideal for motorsport and high-performance applications where tolerances and material properties are important.
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Diagram ref no 16
6 Pin Connector housing base
Forms part of 91161286801 or 91161286702
Please note that this is not the complete unit, it's just the housing. The metal terminals are not included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286702
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
6 Pin Connector Cap
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286801
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
6-Pin Connector Housing with Hole for various models of Porsche. It forms part of 911 612 867 02.
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Diagram ref no 16
This connector housings are made from PA12 Nylon which is an excellent insulator and known for its durability, high impact strength and resistance to heat and chemicals. It also won't become hard and brittle over time. Ideal for motorsport and high-performance applications where tolerances and material properties are important.
Please note: that this is not the complete unit, it's just the housing. The metal terminals are not included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286801
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
6 pin connector housing, male side (with locating pin). This item forms part of 911 612 867 02
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Diagram ref no 16
This connector housings are made from PA12 Nylon which is an excellent insulator and known for its durability, high impact strength and resistance to heat and chemicals. It also won't become hard and brittle over time. Ideal for motorsport and high-performance applications where tolerances and material properties are important.
Please note: that this is not the complete unit, it's just the housing. The metal terminals are not included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286801
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche part no 999 652 436 40 (forms part of 911 612 115 03)
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 914/4 - 1971
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Diagram ref no 18
Unlike the original which easily cracks, this modern reproduction is made from ultra tough PA12 nylon which is resistant against chemicals and heat.
Please note: This is not the complete unit, it's just the cap that snaps onto the connector.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99965243640
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 914/4 - 1971
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
This is the deep profile 15.5mm version, not to be confused with the 11.5mm version (see illustration).
Snap fits parts 91161211502 and 91161211305
High quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemicals resistant. It is also an excellent insulator.
Please note
This is not the complete unit, it's just the part of the housing that clips onto the mounting plate. No pins or wires included.
Click 'Zoom in' for large parts diagram.
Diagram ref no 17
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161211502
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
This is the low profile 11.1mm version, not to be confused with the 15.5mm version (see illustration).
Snap fits parts 91161211502 and 91161211305
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 914/4 - 1971
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Diagram ref no 17
High quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemicals resistant. It is also an excellent insulator.
Please note: This is not the complete unit, it's just the part of the housing that clips onto the mounting plate. No pins or wires included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161211502
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 914/4 - 1971
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
Deep profile 14 Pin connector housing base. This part is 13mm deep (see drawing) and not to be confused with the 7.5mm low profile version.
This forms part of 911 612 113 05
High quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemicals resistant. It is also an excellent insulator.
Please note
This is not the complete unit, it's just the part of the housing that holds the metal terminals which are not included.
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161211502
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 - 1970 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 914 -1970 to 1976
Porsche 924S - 1986 to1988
Porsche 928 - 1983 to 1995
Porsche 944S2 - 1985 to 1991
Porsche 964 - 1989 to 1994
Porsche 968 - 1992 to 1995
Low profile 14 Pin connector housing base. This part is 7.5mm deep (see drawing) and not to be confused with the 13mm deep high profile version.
This forms part of 911 612 113 05
High quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemicals resistant. It is also an excellent insulator.
Please note
This is not the complete unit, it's just the part of the housing that holds the metal terminals which are not included.
Click 'Zoom in' for large parts diagram.
Diagram ref no 17
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161211305
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Sold each - 2 required per car
Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1969 to 1976
Can be used for Left or Right
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91157134701
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 912E 4CYL 1976
Shop Securely
12 Month Warranty
Worldwide Delivery
This Wiesner Classic oval connecting flange is a direct replacement for Porsche part numbers 911 571 051 00 and 911 571 051 01, used on the air control box within the heating system.
Left- and right-hand sides are identical.
Sold each. Two pieces are required per vehicle.
Fits:
Porsche 911 912 1965 - 1989
Diagram ref no 15
This Wiesner Classic version is manufactured from a PA12 nylon and carbon-fibre composite. This advanced material offers excellent heat resistance, impact strength, dimensional stability, and low weight, ensuring long-term reliability even during prolonged high-temperature use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9015710XX32
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed