Rennline

Rennline adjustable pedal lifter plate for Porsche



Fits:
Porsche 944 / 924 / 968
Porsche 996 / 997 / 991
Porsche 986 / 987 / 981 Boxster
Porsche 987 / 981 Cayman

Can't Heel/Toe? Need more height on your gas pedal? Rennline's adjustable lifter plate will solve the problem. This add on pedal accessory turns your standard Rennline gas pedal cover into a fully adjustable unit. This unique design installs in minutes and allows full height adjustment up to 1 inch. Not only does this lifter plate adjust the height but it also allows you to adjust the pedal angle in both lateral and longitude directions. This feature allows you to set the exact angle required to easily perform heel/toe maneuvers. Best of all, every adjustment is simply made from the 3 mounting screws on the face of the pedal.

Note: This is only the lifter plate assembly, Pedal cover and extensions are not included with this kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PA71

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set. Rubber Grip
LHD Cars

Fits:
Porsche 991

Porsche 991.2
Porsche 981 Boxster
Porsche 718 Boxster
Porsche 981 Cayman
Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7160101

The product you are viewing cross references to these numbers

Large Rubber Bonnet/Boot Hooks (Set of 2) 

Add the finishing touch to your Porsche project with these Large Rubber Bonnet/Boot Hooks (Set of 2). Designed in the iconic RSR style, these durable rubber bonnet hooks provide both authentic competition-inspired styling and practical bonnet or boot retention, making them an ideal addition to restorations, lightweight builds and motorsport-inspired projects.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04

It's often the smallest details that distinguish an exceptional build from an ordinary one. Whether you're creating a backdate, replica, restomod or tribute car, these large rubber bonnet hooks deliver the purposeful appearance associated with classic Porsche competition cars while offering a simple, lightweight fastening solution.

Manufactured from durable, high-quality rubber with robust mounting points, these bonnet hooks are built to withstand repeated use while maintaining their flexibility and secure fastening characteristics. They not only enhance the visual appeal of your Porsche but also help reduce unnecessary complexity and weight, echoing the philosophy behind the original factory competition cars.

If attention to detail matters, these bonnet hooks are the perfect finishing touch that tells enthusiasts your build has been completed with care and authenticity.

What Do Rubber Bonnet/Boot Hooks Do?

Rubber bonnet and boot hooks provide a secure secondary fastening system for body panels while adding a distinctive motorsport-inspired appearance.

Their primary functions include:

• Securing the bonnet or boot lid.
• Helping prevent unwanted panel movement.
• Providing a lightweight fastening solution.
• Enhancing motorsport-inspired styling.
• Supporting simplified panel retention.
• Complementing lightweight bodywork projects.

They are widely used on classic competition builds where simplicity, reliability and reduced weight are priorities.

Why Upgrade to Rubber Bonnet Hooks?

Many enthusiasts choose rubber bonnet hooks for both their functional and aesthetic advantages.

Common reasons include:

• Completing an RSR-inspired appearance.
• Finishing a backdate or tribute project.
• Reducing weight compared with conventional latch systems.
• Simplifying bonnet or boot fastening.
• Replacing worn or damaged rubber straps.
• Adding an authentic motorsport detail.
• Enhancing the overall presentation of the vehicle.

These subtle upgrades help create a clean, purposeful look that reflects Porsche's racing heritage.

Benefits

• Adds authentic competition-inspired styling.
• Lightweight alternative to more complex fastening systems.
• Secure bonnet or boot retention.
• Durable construction for long service life.
• Simple installation.
• Completes the look of backdate and restomod builds.
• Enhances attention to detail.
• Excellent value OE Match component.

Installation Recommendations

For the best finish and reliable operation, it is recommended to inspect or replace associated mounting components during installation, including:

• Mounting brackets.
• Retaining pins.
• Fasteners and hardware.
• Reinforcement plates where required.
• Bonnet or boot alignment.
• Body panel mounting points.

Careful positioning ensures correct tension, secure fastening and a professional-quality appearance.

Front bumper wire mesh grill kit w/ 3rd radiator, Inner & Outer, w/o Parking Sensors.

Fits:
Porsche 981 Cayman / 981 Cayman S
without Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit w/ 3rd Radiator. Outer Grill Kit.

Fits:
Porsche 981 Cayman / 981 Cayman S
with Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Rennline REV4 4PC Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche Panamera Tiptronic/PDK cars

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Rubber Grip.
LHD Cars



Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 991 Manual cars only
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche Panamera Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic
•   Precision machined socket that accepts factory potentiometer arm (981/991/Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Perforated.
LHD Cars



Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 Fully Adjustable Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline Rear Tie Down

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) rear hooks.

Note: Also available with intergrated subframe support brace (Not included, but available separately).

Note: Pictures may not show actual product.

Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 981 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs:
These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.

Rennline Billet Aluminium Valve Cover LOWER.
SET OF 2.



Fits:
Porsche 964 1989-94

Tired of your wife nagging you about the oil puddles in the driveway? Rennline has the solution with our new billet, fully CNC machined valve covers. These valve covers are a direct bolt on replacement for your flimsy leaking factory covers, and are machined to accept the reusable OEM gaskets (available below). With the corrosion resistant finish, chamfered edges, and tight gasket fitment, these valve covers are simply the best on the market. Available in Anodized clear or black finishes, or powdercoat red all with or without the fins brushed. Also included are the spark plug wire retainers and retainer hardware for a clean installation. Sold as a pair.

Note: Red are coated to order, please allow 1 week for red coating.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M12

The product you are viewing cross references to these numbers

Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

Fits:
Porsche 981 Cayman
Porsche 981 Boxster

Requires trimming of the plastic tray under the 718 and 718 GT4

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Dust Boots for Rod Ends. PAIR
Size: will fit 3/8", 7/16" and 10mm, 12mm rod ends.

Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
Porsche 991 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 981 Boxster / Boxster S
Porsche 981 Cayman / Cayman S / Cayman GT4

1 boot per rod end. Sold as pair.